Тёмный

Go Kart Steering System: How to Build a Go Kart 

KartFab
Подписаться 93 тыс.
Просмотров 814 тыс.
50% 1

How to build your own go kart steering system at KartFab.com
Free PDF Go Kart Plans. Get them here: kartfab.com/go-kart-plans
Go Kart Parts Kit. Get it here: goo.gl/tp7bBl
This video shows how the go kart steering system works from the steering wheel to the tie rods, pitman arm, spindles, rims, and wheels. Gives a detailed design in the free go kart plans for building your own go kart from scratch. This is part of a free video playlist that shows you how to build a go kart with free plans, and detailed walkthroughs on kartfab.com
How to Build a Go Kart Playlist: • Go Kart Plans: Go Kart...
PREVIOUS VIDEO: Go Kart Seat Installation • Go Kart Seat: How to M...
NEXT VIDEO: Go Kart Brakes • Go Kart Brakes: Pedal,...
kartfab.com Go kart plans, kits, restorations, and maintenance walk throughs
more go kart videos / kartfab
Get more KartFab:
Follow KartFab: / kartfab
Like KartFab: / kartfab
KartFab Google+: plus.google.com/+KartFab
Instagram: / kartfab
You can follow this build by checking out my website that provides a detailed write up for the go kart steering system, so you can build it yourself at kartfab.com/go-kart-plans/go-k...

Авто/Мото

Опубликовано:

 

20 дек 2015

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 297   
@gibronnaqeelandries3406
@gibronnaqeelandries3406 6 лет назад
bro ive watched alot of guys but you have given me complete confidence and inspiration...the world needs more people like you for sure
@gummyking6507
@gummyking6507 4 года назад
did u make it?
@augustobernaus6431
@augustobernaus6431 5 лет назад
Hi, you explain really well, i tryed to do a go kart too and i put the spindle brackets with a 10° angle, because if you put it exactly at 90° the go kart won't bend. Thank you for this videos. It is very inspiring
@sentradynamics8889
@sentradynamics8889 5 лет назад
Awesome video. Gotta love that 1" square tubing. Makes things so simple : )
@patricktovar6086
@patricktovar6086 4 года назад
Quick, thorough, simple with out a lot of dialog
@brotalkextreme6826
@brotalkextreme6826 4 года назад
I think I'm going to be building a go kart soon this video was very informative and gives you a very good description of everything
@nelsonquinapallo6065
@nelsonquinapallo6065 3 года назад
The best lesson ever on sterring front ends
@jeffg8478
@jeffg8478 2 года назад
Great video. Appreciate the details which actually make this very useful. We are about to install the spindles but was under the impression that you need "camber" resulting in a spindle slightly angled backward 5-10° to offset downward compression and turning resistance. Looks like you kept the spindles at 90°.
@KartFab
@KartFab 2 года назад
It’s a kids go kart 1 wheel peel. Camber/caster/Ackerman are nice but this gets the job done for what it is.
@arkconstructive4456
@arkconstructive4456 3 года назад
is there maybe a way I could buy this steering setup but without the rest of the kit?
@josephworthley1929
@josephworthley1929 8 лет назад
good job, those are beautiful welds
@MrRankinstien
@MrRankinstien Год назад
Well now I know how to fix my go-kart & for that I thank you! I also now know the name of the thing I damaged the "pitman arm"... Overall pretty useful video; thanks for sharing!
@ramizraja557
@ramizraja557 5 лет назад
Great work bro every thing you say so slowly that,s good
@scgoralski
@scgoralski Месяц назад
Awesome video series, thank you!
@jonkwilloughby
@jonkwilloughby 4 года назад
Thank you! Very helpful!!
@muralidharan366
@muralidharan366 7 лет назад
great work
@syedaminrashdi4009
@syedaminrashdi4009 5 лет назад
You are really expert .. Good job
@Straight_Hustle.
@Straight_Hustle. 5 лет назад
Hey, can you provide some knowledge with akerman steering arrangement for baja competition
@MasboyRC
@MasboyRC 4 года назад
Great job buddy, this video so inspiring to gokart builder. Thanks for sharing
@sNossi.
@sNossi. 7 лет назад
Dobra robota :) Good Job
@KartFab
@KartFab 7 лет назад
Thanks!
@naughtyziaboyzpuma9045
@naughtyziaboyzpuma9045 7 лет назад
awesome vids man
@d.j.5634
@d.j.5634 Год назад
Great,I built this same set up in 1978, and won second prize at state fair ( 7th grade) I think I may build another 1 nice bit of inspiration
@jerrydempsey3490
@jerrydempsey3490 2 года назад
Excellent video. Well done. 👍
@atom2319
@atom2319 5 лет назад
Good demonstration brother
@thediychannel4650
@thediychannel4650 3 года назад
fantastic video. can you show us how you made the spindle and tie rods assembly? how did you make/bend the spindle brackets to a letter "c" , or did you just buy ready made spindle brackets?
@gianfranco123able
@gianfranco123able 3 года назад
awesome , great job
@anonymousindonesia9200
@anonymousindonesia9200 7 лет назад
awsome...!!!
@josepharato5885
@josepharato5885 3 года назад
Excellent video, where you been l watch you religisly enjoy your video so much. Thanks Joe.
@thesvenvids7708
@thesvenvids7708 8 лет назад
That's a lot simpler than I thought it would be. Thanks :)
@KartFab
@KartFab 8 лет назад
+TheSvenVids Thanks. Yeah, go kart steering is pretty straight forward and reliable.
@hazzabazza4675
@hazzabazza4675 8 лет назад
+KartFab can you solder the metal
@KartFab
@KartFab 8 лет назад
thanks
@akashanand1329
@akashanand1329 6 лет назад
thank u very much.. it help me lot
@lisatapales5377
@lisatapales5377 6 лет назад
thanks man
@stclairstclair
@stclairstclair 2 года назад
I inherited a really nice small drill press, It makes life better.
@mohdhelme6180
@mohdhelme6180 7 лет назад
good tutorials, awesome job
@ashokbharda8393
@ashokbharda8393 6 лет назад
Mohd Helme ....
@aguspriandono2536
@aguspriandono2536 5 лет назад
You are the best.
@mindhunter00789
@mindhunter00789 2 года назад
excelent wielder but i would grind them down for a better looking finish ican grind lol but i cant wield like you nice job
@canhuyphan.1236
@canhuyphan.1236 5 лет назад
Verry good
@too_speedy.
@too_speedy. 2 года назад
Wow thanks I'm building my own good cart too
@andrewwilliam8139
@andrewwilliam8139 6 лет назад
can you explain steering system along with suspensions
@jayaborbanyu9486
@jayaborbanyu9486 5 лет назад
great great ... go on
@speedracer3967
@speedracer3967 5 лет назад
Excellent video. If I were you though, I would invest in a steel table top(36x36, or 48x48). Go to the scrap yard and you can find something that would work nicely. The second thing about the steel table would be no longer needing nails to hold your form. You can use magnets… Like nature intended! 😂😂😂 PS, please drill your wheel nuts and attach a cotter pin. Vibrations will ultimately cause the nut to loosen, and fall off. Hopefully not while you are riding fast.
@kingmatthews5436
@kingmatthews5436 8 лет назад
Exactly what I needed for my go kart project thanks
@KartFab
@KartFab 8 лет назад
+Honda Cr 500 no problem, and have fun building!
@KartFab
@KartFab 7 лет назад
Its less expensive to buy a go kart that is pre-made versus have someone make you one.
@kingmatthews5436
@kingmatthews5436 7 лет назад
Clayton Crawford you shall watch and find out :)
@kingmatthews5436
@kingmatthews5436 7 лет назад
Clayton Crawford also it's a pretty easy to put them together
@MiguelMartinez-sh8gz
@MiguelMartinez-sh8gz 4 года назад
Do you have a video for disc brake installation?
@ManishKumar-xb8sf
@ManishKumar-xb8sf 6 лет назад
Hey guys what should be the king pin inclination for go kart?
@canadiancatgreen
@canadiancatgreen 5 лет назад
Ah this answers my question seconds into the video go karts should steer easily. Which is what I had been used to go karting for many yrs not professionally though. The reason I ask is one place I went to had karts that were well hard to steer the wheel was hard to turn and track was rough so trying to go full power was creating many times I felt I would crash. These were a different kart than I was use too as well though the ones I am use to are fast but not racing ones this ones looked faster but not sure if they were
@devanshgupta2702
@devanshgupta2702 7 лет назад
bro i need a help i want to know how to paint a fibreglass​ sample plz tell this in ur next video its urgent
@jeffsebastian
@jeffsebastian 2 года назад
You are the Bob Ross of go kart building. We're just going to weld up a little happy pitman arm.
@KartFab
@KartFab 2 года назад
😂😂😂
@fauzimachamili1691
@fauzimachamili1691 5 лет назад
Interested your angle measurement tool, yellow colour, where you buy that?
@matthewmena6390
@matthewmena6390 5 лет назад
what would the schematics look like if you made it with miniature springs for shock absorption. i would love to make a small racer cart lifted just a bit to add that, that way it'll not only be fast but smooth as well
@KartFab
@KartFab 5 лет назад
I actually did that for the live axle version of this kart. It’s called springer suspension Https://kartfab.com/live-axle-go-kart-plans
@jonnyarmstrong1629
@jonnyarmstrong1629 2 года назад
Awsome
@RahulrajGupta96
@RahulrajGupta96 5 лет назад
Have any idea about ackerman mechanism
@ExploringCabinsandMines
@ExploringCabinsandMines 6 лет назад
Thanks buddy, I was watching your welding now I'm blind !!!!
@KartFab
@KartFab 6 лет назад
You're welcome, glad to have contributed to your blindness. Anytime.
@victorsuarez1670
@victorsuarez1670 4 года назад
jajajaja ok
@johnwade5747
@johnwade5747 5 лет назад
Google 'Ackermann theory'BEFOREyou weld the tie rod arms.If out front,they need to be angled towards tire's inner sidewall,if theyre in behind axle,they need to be angled in toward the framerails.
@MrCoolerMan1
@MrCoolerMan1 3 года назад
How do you determine the turning radii for the wheels? How do you make sure the inner wheel turns tighter when turning? Thanks!
@user-mj9pi3mx6u
@user-mj9pi3mx6u 2 года назад
To do that you need to have the spindle bars facing backwards to change the ackarman angle.
@johnwade5747
@johnwade5747 4 года назад
Ive watched your video.I'd point out that you have no Ackerman with the tie rod arms at a 90 degree to the spindles.A good rule of thumb is If the arms are out in front,they should be angled out,(with the tires straight ahead)so an imaginary line from center of tie rod and kingpin bolt should meet at the center of back axle.And if the arms are behind,angle them in toward frame.you'll be amazed at how much better they'll turn.No scuffing off the treads.(see my video. Go Kart steering explained .Including Ackermann theory. ) john wade,you tube.
@ommivarahajayakrishna7252
@ommivarahajayakrishna7252 2 года назад
Sir , could you please give a brief on kill switch please
@jmc4712
@jmc4712 5 лет назад
Thanks for the video. How tight should the bolt and lock nut be on spindle?.im having steering issues. When i turn the cart pushes through the outside tire and slides. Any thoughts thanks
@KartFab
@KartFab 5 лет назад
Don’t give it as much gas and and don’t turn as sharp.
@leviperez5072
@leviperez5072 7 лет назад
on the spindles what is the bolt tread or what size
@diversity2739
@diversity2739 4 года назад
thanks
@vid_sh_itsme4340
@vid_sh_itsme4340 7 лет назад
how you decided the angle of steering control arm? I am developing something similar to it so if there is any general angles for fixed radius of rotation , they may help alot.
@KartFab
@KartFab 7 лет назад
good luck, pitman arm should be roughly 1/2 the length of the spindle arms, and you keep pitman arm from over rotating to keep wheels from locking up and sliding due to over rotation.
@jestin9241
@jestin9241 6 лет назад
Good
@antoniomazilu632
@antoniomazilu632 7 лет назад
I subscribed
@user-re9rn3cf5z
@user-re9rn3cf5z 7 лет назад
good
@417plasma6
@417plasma6 3 года назад
what ga are you using for the chassis ? 11 ga ? or 14 ga great video clear explanation
@KartFab
@KartFab 3 года назад
11 but you can get away with 14 except for axles
@BLUETANUJYT
@BLUETANUJYT Год назад
dude you give such a simple and great explanation ! thanks a ton,,, i was worrying that i had to get a rack and pinion steering which is costly according to my budget. thanks a tonn for this simple yet effective steering mechanism. but i wanted to ask, would the vehicle be stable sayat a speed of 60- 80 kmph? (37-50 mph)
@KartFab
@KartFab Год назад
Ask your mom. If you go that fast in a kart, instead of RIPPing, you going to 🪦RIP
@BLUETANUJYT
@BLUETANUJYT Год назад
@@KartFab hahahahahaha.......nice one ....i just asked to know about its stability 🤣🤣😂
@donaldhardie3628
@donaldhardie3628 Год назад
I don’t know much about welding so excuse me if I sound ignorant but what type of welder is that? And what brand is it?
@hipstergrandma228
@hipstergrandma228 9 месяцев назад
When i checked the site for the kit it was out of stock would it comeback or thats it?
@mikef8769
@mikef8769 8 лет назад
Nice work! I noticed you did your spindle brackets at 90 degrees. I'm currently rebuilding a kart for grass and dirt. No pavement. Would 90 degrees work for me? Will I have over/under steer issues?
@KartFab
@KartFab 8 лет назад
+Mike F 2-7 degrees from 90 would be ideal.
@mikef8769
@mikef8769 8 лет назад
+KartFab Wow! Quick response! Thanks!! I'll shoot for 85 degrees then.
@wgpubs
@wgpubs 8 лет назад
At about the 2:35 mark you weld a small washer to one of the ends of the steering column, but I don't see that in the PDF plans? There it looks like the steering column is welded to the 2 1/2" OD washer. Can you clarify? Thanks!
@KartFab
@KartFab 8 лет назад
+Wayde Gilliam yes. I just used the small washer to fill in the gap from the larger washer when welding it.
@saifbouchnak9936
@saifbouchnak9936 7 лет назад
hi :) when i convert from inch to cm : 41" = 104,... cm its not enough !! i think that its too small for an adulte !! (sorry for my poor english ! ) can i konw what do you think about that ?? thanks ! ^_^'
@jaschatz1
@jaschatz1 6 лет назад
where did you get the spacers? Can I use 3/4" OD black pipe cut to size?
@KartFab
@KartFab 6 лет назад
Yup it has a bit of slop if you do it with pipe but it’s fine. Or 11 ga 1” tubing and grind the shaft down a tiny bit.
@FtwFilmz
@FtwFilmz 6 лет назад
question. for the floor panell can i just use a sheet of thin ply wood or does it have to be sheet metal
@KartFab
@KartFab 6 лет назад
+Agora Gaming it can be whatever you want.
@witosarlaw
@witosarlaw 3 года назад
Mantap bang... saya juga lagi bikin go kart...😁🙏😊👍
@andrewhernandez7715
@andrewhernandez7715 3 года назад
What are the lengths of the tie rods?
@victorgam4114
@victorgam4114 8 лет назад
goooooood
@raffaeletaccetta9479
@raffaeletaccetta9479 8 лет назад
👍Cool
@brapperdan
@brapperdan 4 года назад
What is the easiest way to reduce the turning radius? I ended up with a very wide radius
@KartFab
@KartFab 4 года назад
Lengthen the pitman arm, or look into Ackerman
@MARKZARATEV
@MARKZARATEV 7 лет назад
Friends what is the name of that type of welder that welding machine ???
@KartFab
@KartFab 7 лет назад
mig welder
@zainhussein1975
@zainhussein1975 5 лет назад
Sir, I urgently need your help. I have finished my go kart thanks to you and your tutorials. My front wheels turn at different angles!! If I turn right the right wheel turns about 30 degrees and the left turns 45 degrees. If I turn left the opposite happens. With your experience, pls share what makes the angle issue. Will appreciate your response
@KartFab
@KartFab 5 лет назад
I have a feeling you didn't actually use any of the parts I linked to, and you just kind of made it up as you went... Being without the proper parts and cutting corners is probably why you are in this situation. Is this true? So even if the wheels turn at different angles, does the kart turn and handle well?
@zainhussein1975
@zainhussein1975 5 лет назад
KartFab Sir, many thanks for your prompt response You are very right. Where I am, accessing the parts becomes very expensive. So we used about 10mm round bar to fabricate the rods connecting the steering to the wheels. However, I had several challenges I used a Centrifugal clutch from amazon along with a 34 teeth sprocket to rotate a live axle having 16inch Tyres. My clutch started smoking and became really hot - my front Tyres (only 10 inches) were cutting the corner but I guess that because I did not use the bracket to stop steering cut, started to slip. If not too much for you, pls advise I want to share the pics with u via email. Thanks
@KartFab
@KartFab 5 лет назад
@@zainhussein1975 you will need to research ACKERMAN steering. What you have created is the opposite of what you need to do.
@zainhussein1975
@zainhussein1975 5 лет назад
KartFab Well I will work on the Tyres and try sourcing the parts from GPS Any insight on the clutch and sprocket issue shall be appreciated Many yhanks
@KartFab
@KartFab 5 лет назад
@@zainhussein1975 you know... if you would have just looked at the free go kart plans i have listed here kartfab.com/go-kart-plans then you wouldnt have to ask so many questions. The reason your clutch is burning up is because you have the wrong size rear axle sprocket. Get an axle sprocket that will give you a 6:1 or higher gear ratio. Id say if you have a 10t clutch to get a 72t axle sprocket. You want to gear for no more than 25 mph at 3600 rpm.
@joedmac78
@joedmac78 5 лет назад
I have a kart frame I'm building it's an old race frame I think? I don't think it's home made. I can't find any info on it itself. It's definitely made for going in circles around a track. The steering spindles are at extreme angles and it always wants to turn you really have to hang on the wheel to keep it straight. I want to change that. Should I just cut and weld them back up straight?
@KartFab
@KartFab 5 лет назад
Ask that question with pictures on DIYgokarts.com there might be more to the puzzle than you think.
@joedmac78
@joedmac78 5 лет назад
@@KartFab thank you I registered to the site but it won't let me post. Hopefully in a day or two I'll get admin review or something like that , it's telling me something like that anyway. Thx
@calebgraham1318
@calebgraham1318 Год назад
What program do you use to design
@nileshrajpurohit3148
@nileshrajpurohit3148 6 лет назад
plz show me how to calculate all the dimension for steering goemetry i am from D Y PATIL ENGINEERING COLLEGE AKURDI PUNE INDIA my team is working ona gokart n we are stuck on the steering goemetry plzz help
@ericksanchez6602
@ericksanchez6602 4 года назад
Hi, could you tell me what Welder are you using here? Thanks
@KartFab
@KartFab 4 года назад
Millermatic 251
@trexbennett6180
@trexbennett6180 3 года назад
is it safe to implement frontal suspension system with this steering build?
@KartFab
@KartFab 3 года назад
Just select “springer” suspension
@cbitgkdc1961
@cbitgkdc1961 5 лет назад
can u pls let me know the material used for building pitman arm and steering arm??
@KartFab
@KartFab 5 лет назад
link to plans in video description. Plans list out ALL materials, lengths, and dimensions used in build.
@Prashanth-yn9zd
@Prashanth-yn9zd 7 лет назад
Can you Please explain how steering stop works?
@KartFab
@KartFab 7 лет назад
+Prashanth it prevents the steering wheel from over rotating in either direction.
@Prashanth-yn9zd
@Prashanth-yn9zd 7 лет назад
KartFab I've got to 3.2 turns lock to lock rack and pinion, i want to make a steering stop, could you please tell me how can i do one?
@KartFab
@KartFab 7 лет назад
so what is making it lock? can you move the thing that is making it lock?
@Prashanth-yn9zd
@Prashanth-yn9zd 7 лет назад
KartFab I'm building an Off road car from scratch, In that I've to make a steering stop Can i get your mail id?
@royalroyal1082
@royalroyal1082 5 лет назад
Why not use cart starting system car bus ?
@RL-lm3ed
@RL-lm3ed 7 лет назад
What kind of welder was the one he used in this video?
@KartFab
@KartFab 7 лет назад
i used a miller 212 with .035 sold core wire 75/25 gas mix.
@luisortega6140
@luisortega6140 4 года назад
What are the wheels and hubs and tires and all that?
@KartFab
@KartFab 4 года назад
right here, just click on the go kart kit link and you can see a breakdown of all individual parts kartfab.com/go-kart-plans
@ravinkasra
@ravinkasra 4 года назад
what app are you using when you are making the go kart plan?
@geet9957
@geet9957 2 года назад
Cad
@josemariazanbranoyeren7961
@josemariazanbranoyeren7961 7 лет назад
pasame los plano
@themacpackebay
@themacpackebay 2 года назад
Can I put a momo on my kart🤔 I am going to try to do this what you think man🤔
@gearheads1477
@gearheads1477 3 года назад
Can you do this with a lawnmower steering shaft
@KartFab
@KartFab 3 года назад
Im sure you could figure it out
@gearheads1477
@gearheads1477 3 года назад
@@KartFab I couldn’t not I’m making tie rods so
@FtwFilmz
@FtwFilmz 7 лет назад
so i have a lincoln mig 180 welder and i ran out of gas should i continue to weld
@KartFab
@KartFab 7 лет назад
+Agora Gaming do what you think is best.
@FtwFilmz
@FtwFilmz 7 лет назад
hey man quick question can you weld a small sprocket to the shaft of the engine or will it not stick...i know once its welded it cant be removed. thanks
@KartFab
@KartFab 7 лет назад
+Agora Gaming not a good idea
@nadiavaldes4220
@nadiavaldes4220 8 лет назад
Hi. So I'm confused on the steering hoop. The free plans say to cut it at 39 degrees but your video is at 51 degrees? Where does the 39 come into play?
@KartFab
@KartFab 8 лет назад
+Nadia Valdes depends on what measurement system you are using, and what size of the angle you are wanting to show...... so 90 degrees minus 39=51 :-) A chop saw would read 39 degrees, and a protractor would read 51. If you were measuring a flat cut on the end of a tube, a protractor would read 90, whereas a chop saw would read 0
@nadiavaldes4220
@nadiavaldes4220 8 лет назад
+KartFab thanks for the response. I had my steel provider make the cuts and gave them the 39 degree measurement, but they must have used a flat cut because it measures 39 with my protractor not 51 so I think I'm gonna need to recut my hoop. I'm good with welding and mechanics but I'm clearly angle deficient! :)
@ashiknaidu4846
@ashiknaidu4846 7 лет назад
plz explain how the steering arm length is calculated??
@KartFab
@KartFab 7 лет назад
That is a vague statement. What do you mean by 'please explain how steering arm length is calculated'?
@joshpratt1897
@joshpratt1897 7 лет назад
Ashik Naidu look up 4bar mechanisms and grashof equations. thatll give you range of motion and lengths for your linkage system.
@antoniomazilu632
@antoniomazilu632 7 лет назад
How is called this program that you make the kart i will subscribe
@KartFab
@KartFab 7 лет назад
+antonio Mazilu CAD
@MrFacepeel
@MrFacepeel Год назад
i just need tires and rims where do i buy those only?
@KartFab
@KartFab 2 месяца назад
On the interwebs
@alexspartan5474
@alexspartan5474 6 лет назад
Hey bro without protractor o weld steering
@KartFab
@KartFab 6 лет назад
say what?
@vynabmc9585
@vynabmc9585 6 лет назад
Wow
@anonymousindonesia9200
@anonymousindonesia9200 7 лет назад
wow
@jokezpaine3408
@jokezpaine3408 6 лет назад
did you weld the spindles at a 90° angle? what about caster and camble?
@KartFab
@KartFab 6 лет назад
90 and no caster or camber. This is the way old school go karts are made (e.g. manco) If you want to change it up you can, but there are always going to be compromises (e.g. tire wear, ease of turning, squirrely/touchy).
@jokezpaine3408
@jokezpaine3408 6 лет назад
KartFab thanks for the fast reply, I just hope mine works out ok. I just welded mine at 10° camber and 15° caster.
@KartFab
@KartFab 6 лет назад
that should be alright, might need to bend the spindle brackets a bit to get the tie rods to clear the frame but thats not a big deal
@jokezpaine3408
@jokezpaine3408 6 лет назад
KartFab ya I'm just waiting for my parts in the mail to see if it clears the frame, it's gonna be close though.
@jokezpaine3408
@jokezpaine3408 5 лет назад
KartFab well it seems fine until I hit 45 mph then it gets the touchy steering so I'ma do 0 camber and 5 caster cuz it scares the shit outta me, I got almost flipped a couple times when racing lol
@AlexM-lu9el
@AlexM-lu9el 7 лет назад
How long is the steering column before you bend it
@KartFab
@KartFab 7 лет назад
+Alex PlayZ the steering column is not bent. Please explain.
@Shannonhittson
@Shannonhittson 6 лет назад
I can't seem to find the length of the steering column. Been spending hours on trying to pause the video for the measurements but I can't see past the title of explanation part with the deminsions on it!
Далее
Go Kart Brakes: Pedal, Drum & Band Install
4:14
Просмотров 557 тыс.
Making Steering Knuckle Go Kart For Bicycle Wheels
9:26
How To Make a Go Kart Frame: Go Kart Frame Plans
4:38
Просмотров 282 тыс.
Why I Bought a 40-Year-Old HONDA CrossKart
10:55
Просмотров 1,4 млн
Flywheel Trebuchet
9:09
Просмотров 4,6 млн
DIY Drill powered Go Kart
10:18
Просмотров 10 млн
Off Road Go Kart - How to Build
13:00
Просмотров 2,5 млн
Помыла и машину, и водителя
0:18