Тёмный
No video :(

Gold Bezels 3 Ways / Part 3: Gold Bezel with Argentium Silver Back 

Metalwerx School for Jewelry and Community Studio
Подписаться 2,2 тыс.
Просмотров 6 тыс.
50% 1

Take your jewelry skills up a notch and work in gold!
In this final video in our 3-part Gold Bezel series, studio jeweler and educator Paulette Werger demos how to make a 22k gold bezel with an Argentium silver back. You'll also learn how some important differences to a rose cut gem, a flat stone, or a more opaque stone like turquoise. Tools and materials used in this video are listed below!
We recommend watching Parts 1 and 2 before you watch this video, just to make sure you learn all the bezel skills and techniques demonstrated but not explained in this video. Links:
- Part 1: Open Back Gold Bezel with step: • Gold Bezels 3 Ways / P...
- Part 2: Closed Back Gold Bezel and Backing: • Gold Bezels 3 Ways / P...
This three-part series, Gold Bezels 3 Ways is sponsored by @Rio Grande. Check out our virtual and in-person classes and expand your gold and metalsmithing skills with Paulette and many other great educators at www.metalwerx.com.
Featured in this video:
Paulette Werger, Studio Jeweler and Educator: / paulettewerger
Rio Grande: www.riogrande....
Metalwerx Studio & School: metalwerx.com/
Tools & Materials List:
22K Yellow Gold Strip, Dead-Soft | Item No. 609216 | www.riogrande....
18k Yellow Gold Strip | Item# 604541 | www.riogrande....
Argentium® Silver 6" Sheet, 24-Ga., Dead-Soft | Item No. 103224 | www.riogrande....
22K Yellow Gold Sheet Solder (Easy) | Item No. 805605 | www.riogrande....
Barrette File, #4 Cut | Item No. 114717 | www.riogrande....
File Handle, #4 | Item No. 114923 | www.riogrande....
My-T-Flux | Item No. 504006 | www.riogrande....
Paste Flux | Item No. 504084 | www.riogrande....
Argentium® Silver Sheet Solder (Medium) | Item No. 103651 | www.riogrande....
3M 9/16" Radial Bristle Disc, Pumice, Pink | Item No. 332574 | www.riogrande....
Music Credits:
Jellyfish in Space Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 4.0
creativecommon...
Smooth Move Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 4.0
creativecommon...

Опубликовано:

 

27 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 4   
@cindyheineman8046
@cindyheineman8046 Год назад
The use of the divider to not waste bezel wire or time sanding is a game changer.
@malcolmthompson9848
@malcolmthompson9848 Год назад
Excellent video. I have always soldered bezel to plates by heating from below. I have had problems with solder climbing up the bezel when I heat from above. As far as placing solder chips on the outside , the one draw back is that the excess material becomes contaminated with solder and therefore cannot be remelted to make new stock. Finally, I used to sand my solder joints as I went as you recommend, however, others have pointed out that leaving surplus solder on bezels may prevent the flushing out of bezel seams during subsequent heatings. Now as long as they are accessible, I clean up my seams after final assembly.
@rosemaryholusha
@rosemaryholusha 7 месяцев назад
Great information.
@lenastiward8657
@lenastiward8657 9 месяцев назад
I need to purchase some dividers. Which one do you use and do you have a source?
Далее
Gold Bezels 3 Ways / Part 1: Open Back Bezel
15:24
Просмотров 30 тыс.
나랑 아빠가 아이스크림 먹을 때
00:15
Просмотров 1,7 млн
Silver ring made with fusion in cuttlebone mold
14:02
Просмотров 358 тыс.
Is There a Better Way to Make Rings? @Atthebench
8:54
Просмотров 101 тыс.
How to Make a Flush Cut Inlay - Part 2
15:05
Просмотров 4,5 тыс.
Tube Setting For Jewelry
9:54
Просмотров 89 тыс.