GOODBYE! The LAST Studio Tour!

Подписаться 48 тыс.

Просмотров 18 тыс.

50% 1

To try everything Brilliant has to offer-free-for a full 30 days, visit brilliant.org/... . You’ll also get 20% off an annual premium subscription.
It is time to say GOODBYE! Parting is such sweet sorrow and all that. We are moving cross country from Philadelphia PA to Portland OR, which means leaving behind the original "Mandic Lab" studio space. Let's take one final look at my maker 3d printer RU-vid Studio in this shop tour video. I'll show you behind the scenes of a 3D printing makerspace and a bit of how the videos are made, complete with audio and video equipment.
-----------------------------------------------------------------------------------------------
Please consider supporting by checking out my various links:
www.mandicreal...
-----------------------------------------------------------------------------------------------
Filmed with (Affiliate Links):
*** Main Camera: bhpho.to/3RStTnz
*** Main Lens: bhpho.to/4avDFmt
*** Video Recorder: bhpho.to/3Oa4qmZ
*** Action Camera: bhpho.to/45CS10Q
*** Wide Angle Lens: bhpho.to/3RXQXBj
*** Slider: bhpho.to/48YMmnD
*** Studio Microphone: bhpho.to/4216F1z
*** Voiceover Microphone: bhpho.to/46uECsE
*** Monopod: bhpho.to/3PT2yir
*** Tripod: bhpho.to/3PSKXY4
*** Primary Lighting: bhpho.to/3RXSmb3
*** Additional Lighting: bhpho.to/3RXVfsf
*** RGB Lights: bhpho.to/3S77IbO
*** Drone: bhpho.to/423XrS6
-----------------------------------------------------------------------------------------------
The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.
#mandicreally

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 93

@nomadsgalaxy 3 месяца назад

God dang it, I'm tearing up. Only knew you for a short time, but the time we got to hang out was legendary. 🤘

@MandicReally 3 месяца назад

Wish we’d gotten to hang more. You’ll have to visit the PNW sometime. 👍🏻

@nomadsgalaxy 3 месяца назад

@@MandicReally Absolutely!

@sapper_5126 3 месяца назад

It’s so crazy to watch your life evolve man. First it was the hot rod hippie and I loved the videos then. Then that ended and 3D printing became the focus. Can’t wait to see what Portland brings!

@davidlikestoprint 3 месяца назад

Your videos got me into 3D printing!Thank you for the tour and all the hard work that goes into your videos I’ve Loved watching this studio evolve. I can’t wait to see the new space and how you make it even better! Excited for your new journey safe travels 🙂

@linkeroniw 3 месяца назад

This might be a really weird and random question, but did you build custom cars by chance?

@thenextlayer 3 месяца назад

End of an era! Happy for you bro and can't wait to see what you come up with in the new space

@JohnOlson 3 месяца назад

Have a safe and fun trip to Portland! Looking forward to seeing the new setup and what you build.

@MandicReally 3 месяца назад

I’m daydreaming about the new studio every moment as of late. It’s gonna be epic. Thanks!

@deeply999 3 месяца назад

We have a lot of great places here you will find useful.... Also have West3d and ProtoPasta so its the benefit to PNW.

@ogpennywise 3 месяца назад

Have fun over on the wrong coast. Too bad we never got to meetup, being an hour+ south of you, but no worries, we can't meet everyone on Earth.

@scottrayner7865 2 месяца назад

Big fan of the Hotrod hippie and recently came across to the 3d printing channel in the last 6 months. Excited to see the bare bones plans and fit out of the new workshop - it was pretty nostalgic to see this episode, I really enjoyed the episodes when you first moved to Philly. Its how you inovate and realise potential in things that always brings me back to your channels- cheers dude

@critter42 3 месяца назад

So I guess you used to build custom cars? Who knew?

@SamJantz 3 месяца назад

So real talk: how are you going to handle not being near a Microcenter?

@MandicReally 3 месяца назад

You had to bring that up didn’t you? 😅🤣 Not pleased honestly, but as I develop relationships with brands I go to MC less. Hopefully someday I can catch AMDs attention. 😹

@SamJantz 3 месяца назад

@@MandicReally well that's good. Otherwise you would have needed another U-haul or preemptive purchases. Worst case, AMD is up in Seattle so you can always take a day trip and knock on their door :D

@theglowcloud2215 3 месяца назад

Huh. I wonder if he built custom cars...

@VincentGroenewold 3 месяца назад

Safe trip! I do wonder always, the gear and stuff you have must have cost a ton, is that all investment from when you built custom cars?

@MandicReally 3 месяца назад

Mixture of both but the tools are of course primarily from when I worked on cars. Which taught me to invest in my business heavily. Not the healthiest mindset most likely.

@joshuastill4024 3 месяца назад

thanks for the tour and safe travels to your new place expanding your opportunities and future

@MandicReally 3 месяца назад

Thank you so very much.

@TheDoctorRust 3 месяца назад

I consider this title a clickbait 🫣🔌

@NanashiRyuu 3 месяца назад

Thanks for the tour! I love seeing how people use their space and what they do to make it work for them. I hope you can make some fun stops along your cross-country trip and that everything arrives safely.

@MandicReally 3 месяца назад

I used to do Shop Tours on HotRodHippie specifically because I wanted to see how other people setup their spaces and show folks options they had. So I definitely understand liking seeing behind the scenes. Thanks for watching and for the kind words!

@RayKholodovsky 3 месяца назад

Oh wow, that's quite a move! I hope it has all gone well already? It was awesome that I got to meet you and visit this shop once, and I'm looking at around 9:32 and wondering if yellow Matco box, 3rd half drawer down on the left is those red hammers for auto body work that you once explained all about to me. Hope everything you didn't take with you found a good home.

@ugotznuked 2 месяца назад

Regarding the resin smell, Matterhackers has a resin that isn't epoxy-based. I use my SL1S a lot more often now that I don't need to actively avoid fumes from it. It's a bit harder to use- you need to let it cure longer, and idk how well a standard lifting bed would do vs the Prusa's tilting vat, but I find it works well.

@DWIT3D 3 месяца назад

Jealous of all that space! Thanks for the tour!! 😊

@MandicReally 3 месяца назад

Wait until you see the next one! It’s not bigger but it is a little different and I think it’s gonna be great.

@cheesedoff-with4410 3 месяца назад

Ah! Someone who sorts stuff like me. I look forward to seeing how you arrange your new studio/workshop. Evan did just fine with the gimbal by the way.

@Ornatetooth0475 2 месяца назад

Dude idk if two men and a truck are there but we move everything basically I mean yes it would be very expensive to move but we are time based you would probably get 4-5 guys tho that’s where the price comes in we would’ve moved that and no extra charge just cause it’s heavy your price wouldn’t be too much higher than a regular out of state job because that many guys should be able to do the same amount 2 guys can twice as fast

@solidusseal 3 месяца назад

damn.. when most people from the Netherlands like me 'move' it is at most 1 hour from your previous .. you realy go cross country from one end to the other a 42H drive :D Best of luck.

@makeitgr8317 2 месяца назад

Hope you are surviving the hot weather in Portland! Can't wait for the first video in the new space. Plenty of new challenges I am sure!

@Etrehumain123 3 месяца назад

You move !? But you have rebuilt this space like 6 months ago only !!

@TheMadWookiee 3 месяца назад

I some how did. Not see that you started a second channel and missed seeing you on hot rod hippy now I’ll catchup on this channel

@buhizkewl7105 3 месяца назад

Very interested to see what you do with a new studio, given the practice and different focus from the get go. Kudos to Evan(?) for the camera work!

@MandicReally 3 месяца назад

Yea, I’m excited (daydreaming constantly) for the next space and applying what I liked and didn’t like from this one.

@S.A.S.H. 3 месяца назад

Good luck with the move. See you on the other side...rather literally, I guess.

@ThisisDD 3 месяца назад

Welcome to Oregon!

@MandicReally 3 месяца назад

Much appreciated!

@ThisisDD 3 месяца назад

@@MandicReally No problem at all! We're pretty easy going around here!

@binksy17 3 месяца назад

I have about 8 printers, including a Prusal XL in a single car garage, so this videos has been really useful to see how you have maximised the space before you move, Really enjoyed it!

@MandicReally 3 месяца назад

It’s always nice to see what others are doing. I think the next studio printers will go more vertical. I need to take up less space with machines.

@MiladGolshan 3 месяца назад

I'm also keeping my neptune as a storage area now, makes a better storage place than a printing machine

@chasedown26 3 месяца назад

I got some pink abs from the moving sale! Cant wait till we can see the new studio!

@thatguymakesthings 3 месяца назад

I can confirm that is in fact the studio, still sad to see you go man

@jeffthorson625 3 месяца назад

i love the rat fink tool box if you want a good table top bandsaw i would go with the rikon

@deeply999 3 месяца назад

That is literally the weirdest house Ive seen yet, It would fit in here in Portland

@abeardedbucket 3 месяца назад

Thank you for the tour and looking forward to seeing the new space, with all the trials and work that went into the old space the new space is going to have a major leg up right from the start.

@MandicReally 3 месяца назад

Yeaaaa, I like to think I’ve learned lessons and will have a better start with the next spot. Then I remember that nothing is ever perfect and it’s still gonna be trial & error. Oh well, it’ll be fun anyway.

@dylandarity8694 3 месяца назад

I’m here in Portland! It’s beautiful this time of year

@ghostpro1293 2 месяца назад

Wtf I was not expecting Portland Oregon to be the next stop!

@highlatitude64.84 3 месяца назад

Ah, that's the 'accent in your style, custom car builder. 👍

@MandicReally 3 месяца назад

Yep, a lot of the design and style things I do with my work are rooted in my time as a car builder.

@billheaton7307 3 месяца назад

Thanks for the shop tour! What takes you to Portland?

@ghostshadow1 3 месяца назад

One takeaway from the extended tour was that I am glad I'm not the only one who's shop looks like this haha! At times I feel like a straight up hoarder with pathways made to get through all the stuff that's accumulated on every possible horizontal space. Slowly working my way into organizing it so there's a cohesive workflow but it's definitely a challenge.

@sliverbaer 3 месяца назад

Safe travels! As you pass Akron OH, I will wave! If you have any issues while traveling I am sure the community will easily help out.

@nunovicente34 3 месяца назад

Safe trip! Can’t wait for the upcoming 😄

@MandicReally 3 месяца назад

Thank you and I too cannot wait to get started!

@TalkingSasquach 3 месяца назад

Whole drawer of pickle forks! Gotta love it!

@olsonj 3 месяца назад

welcome to oregon, hope you enjoy the stay :)

@ryanthorp9016 3 месяца назад

i wonder if Mandic built custom cars

@JeffDupont38 2 месяца назад

no issues with the fumes while working?

@jerrysmith6798 3 месяца назад

GL with the move! come up to seattle sometime

@ndisa44 3 месяца назад

Really impressive studio/shop, cool to see bits of previous videos scattered around. I saw the Ender 3 V3 on the old workbench, is that ever going to make a return after all the problems found on it during the setup stream?

@MandicReally 3 месяца назад

I actually just gave away the Ender 3 V3. It ended up being a wiring issue. The person I gave it to fixed it and gave it to a family member as their first printer. I just did not have time to mess with it for a video or stream unfortunately. And it irritated me too much to want to. ha

@ndisa44 3 месяца назад

@@MandicReally I don't blame you. It'd be hard to justify spending time on a machine with a naming scheme that bad 🤣

@MandicReally 3 месяца назад

@@ndisa44 Yeaaaa, it really was driving me up a wall when I tried. ha

@TitoSabbyPH 3 месяца назад

Sad to see this for the last time, however I am looking forward to the new Studio!!! Great Work Mandic!

@justinchamberlin4195 3 месяца назад

The end of an era...your videos on workspace organization have been great, and it looks like we might get a few more of those as you set up your new space.

@FreshPrintsofBelair 3 месяца назад

Thanks for the behind the scenes look at your studio. Nice setup. Have a safe move to Portland.

@therick0996 3 месяца назад

Love seeing how the sausage is made!

@MandicReally 3 месяца назад

I always enjoy a studio tour, never had a reason to do one of my own so it was fun.

@LouisKowolowski 3 месяца назад

Welcome to OR from Bend!

@AlienTaskForce 3 месяца назад

Welcome to Portland!

@MartinEwald 3 месяца назад

Looking forward to your space in portland!

@kerrigreen2626 3 месяца назад

Safe moves, loved the little cat cameos. Lol

@MandicReally 3 месяца назад

They are always around, always watching... and waiting... Thank you!

@Eric_Wolfe-Schulte 3 месяца назад

⁠lurking!

@davidtobin 2 месяца назад

On to the next!!

@LoeKie_Aus 3 месяца назад

Thank you for the Tour!

@MandicReally 3 месяца назад

Happy to show you folks around!

@NoMercyFtw 3 месяца назад

I want to leave Pennsylvania so bad I can't stand this place, I think my wife is finally ready

@MandicReally 3 месяца назад

Eh, I like PA and always land back here, likely not this time though. Plenty to dislike but I think plenty to like to. We shall see.

@NoMercyFtw 3 месяца назад

@@MandicReally I grew up in PA was here majority of my life we left and went upstate New York for a few years and my wife hated it cuz we were away from family till we ended up buying a house and settling here to raise our kids, but now since our kids are older 22 and 27 I want out so bad.... Definitely not a horrible place there are worse places to live without a doubt I just think I've been here too long lol....

@MandicReally 3 месяца назад

@@NoMercyFtw Oh I get that. Spent my first 22-23 years here and I've bounced around for the last 15+ years. Tried upstate NY, that lasted about 6 months, ha. Hoping the Pacific Northwest will be a good fit. It is beautiful country if nothing else.

@NoMercyFtw 3 месяца назад

@@MandicReally yeah Portland is a beautiful place

@allenrowand503 3 месяца назад

@@MandicReallyI love it here, but there’s no substitute for a half cold, doughy Philly pretzel from a street vendor. Looking forward to having you in the neighborhood!