Goodman Heat Pump with HORRIBLE Duct System & How I FIXED It!!

Подписаться 107 тыс.

Просмотров 100 тыс.

50% 1

The customer recently bought this home with new Goodman heat pump split unit HVAC equipment and they were experiencing high humidity levels on the second floor. They called out another company and the tech added refrigerant hoping that would fix the issue. After realizing that didn't work, they called me out for a second opinion. First thing I did was hook up all my ‪@FieldpieceProducts‬ wireless probes with the ‪@measureQuick‬ app to get a full system diagnosis. I found the system running with little to no superheat and a low temperature drop (checking temps at the grilles in the space). I then hopped in the attic to inspect the air handler and duct system. Found the problem!! This duct system was hanging on by a thread. No screws, hardly any tape, several major gaps, etc! This unit was pulling in a lot of attic air! It is time for a little overhaul on this duct system. In this video I show my process on repairing the ductwork and removing refrigerant to get the system running right, hope you enjoy. LET'S DO SOME WORK!!
-SUPPORT THE CHANNEL-
www.patreon.co...
-HVAC Tactical-
hvactactical.com/ (Use Promo Code "QUALITYHVAC" to save 10%!)
-FOLLOW ME-
Instagram: @qualityhvacr
-TOOLS THAT I USE-
Veto ProPac LC Tool Bag: amzn.to/3312AMl
MeasureQuick App: www.measurequi...
Fieldpiece Job Link HVACR Charge & Air Kit: amzn.to/2W2mhSF
Fieldpiece Job Link Pressure Probe: amzn.to/3cHCcvl
Fieldpiece SC460 Meter: amzn.to/3adaVQ0
Milwaukee PackOut Tool Box: amzn.to/39AVTDc
Milwaukee 12v Impact Driver: amzn.to/2vAWK84
Milwaukee Rechargeable LED Magnetic Light: amzn.to/2Hz7Xf5
Appion 1/2" Hose: amzn.to/2QxmXM9
Appion 3/8" Hose: amzn.to/395gHBF
Appion Core Removal Tool: amzn.to/3de04XH
Sporlan 3/8" Flare Filter Drier: amzn.to/3a2kGQN
Malco Sheet Metal Snips (Left Cut): amzn.to/3ibjcqQ
Malco Sheet Metal Snips (Right Cut): amzn.to/3662zu8
Malco Sheet Metal Hole Cutter: amzn.to/3n18OWj
Malco Turbo Shear Cutter: amzn.to/2G8bi40
Malco Flex Duct Cutter: amzn.to/3cAQmPs
Malco Panduit Gun: amzn.to/3cz1Cf5
-OTHER CHANNELS TO CHECK OUT-
@hvacrvideos
@hvacknowitall
@hvac-rvlogger
@hvacovertime
@curioushvacguy
@hvacuncensored
@hvacschool
@hvactoolreview
@measurequick
#hvac #ductwork #hvachack

Опубликовано:

3 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 301

@QualityHVACR 4 года назад

Hey Guys! Go check out hvactactical.com and use promo code "QUALITYHVAC" to save 10%.

@crazygangrel 4 года назад

Just got my first shirt from this last week.

@justinrichard4190 2 года назад

hey, i noticed your plenums are both insulated inside. Are they made for both supply or return? just thinking mold could grow on supply insulation.

@allenpape2018 3 года назад

Holy cow! That air is going to take the path of least resistance. I'm a commercial HVAC tech at a Community College and I can believe a contractor would do that horrible work. I have to watch our contractors like a hawk. I literally stand over them to make sure they do the work correctly. As a former school teacher I appreciate the finger wag.

@raulmelgar7695 4 года назад

“Let’s do some work” is literally the best mindset to start the day! I love that vibe!!!

@dandaman2226 4 года назад

I agree!

@g-track5065 2 месяца назад

He's A Bad Cat!!!

@markm0000 Год назад

I don’t even work on residential hvac and I know that looks wrong. Good job fixing it. You’ve made a name for yourself people trust and it shows.

@thooks1234 3 года назад

I'm a Mechanical Designer, lotta years of commercial and industrial HVAC design under me. It has taken me a long time to accept the "standards" of residential HVAC work, especially all the flex used for duct systems, but I understand the use of it. I've always had a commercial contractor do my HVAC work and had sheet metal ductwork used in the houses I've built. With that said, you do some fine work that I take no exception to. Your workmanship, attention to detail, thoroughness and technical skills are outstanding. I've been watching residential HVAC videos for a couple of months and the quality of installations out there is downright sickening. It's a shame people put more focus and money into the quality of their kitchen countertops and finish of a toilet paper holder than the heating and cooling system of their home. Don't tell me they can't get educated on the subject, they know all about sound systems and wireless networks.... Keep up the good work. I enjoy watching your channel, Anti-DIY and Comfort Plus. All three of you do great work.

@TedCookHVAC 4 года назад

Great video and a huge improvement to the system I am sure !! Directing, editing, and production.... you may have missed your calling ......I envy those skills !! Thanks for sharing !!

@crosscountryliving710 3 года назад

I watch your videos too Anti DIY!

@HughesManHVAC 4 года назад

Hardly a word was spoken during this video yet it said so much! Awesome video!

@rlpmlr Месяц назад

I wish you lived in Joshua Tree, CA. I need someone like you.

@JC-tm6wh 4 года назад

Good to see someone take pride in their work. Hard to find these days.

@lukeglasscock4137 4 года назад

You’re living the American Dream. Great job!

@gilbertrodriguez5782 4 года назад

Quality HVAC. I like to watch this guys videos. Always professional. Keep up the good work

@QualityHVACR 4 года назад

Thx Gilbert, glad you like them!

@LBizKid04 2 года назад

@@QualityHVACR how much would you charge for that job?

@walterharris1814 4 года назад

Finally a HVAC Guy fixing install first then addressing other issues. AirFlow is everything to a HVAC System. Checking AirFlow is critical before addressing Refrigerant!!

@elchivodesandoval2888 Год назад

For a minute I was like where's the duct seal ! 😂😂 But you got it. Cool job 👍. I'm a HVAC installer myself going to 5 YEARS. Best job ever.

@dannyg751 4 года назад

Thank you so much for the last part of the video!! I was trying to hard to squint and pause the video to see the pressure and temps. You really do go the extra mile! Great job, you make us and the entire industry proud!!

@dandaman2226 3 года назад

Zach, I amazed of how you are able to get all your work done and still film. Many folks blame the manufacturer when in fact the quality of installation to blame.

@victoriawenger2636 2 года назад

I wish I could find a good reliable person like you here in Texas!

@jaytide6742 Год назад

Nice work, most HVAC guys spend too much time dissing the original install because they think they're doing gods work. If there weren't these crap installs there would be less work for us so I appreciate the incompetent contractors.

@georgedennis2719 2 года назад

Your work is a joy to watch. But that attic job. The cameraman deserves a few extra beers

@isaiahrobinson7187 4 года назад

No one in the game doing it better than you! Always love watching!

@QualityHVACR 4 года назад

Thx man! I really appreciate that.

@campuscab Год назад

Wow some people do not take pride in work. Awesome job fixing it right

@Dave-nm3xc Год назад

Good job mate. Your customers are lucky to have you.

@paulelliott7373 2 года назад

Dude, you have the coolest music with your vids. Great lessons also.

@tyracz 4 года назад

whoever installed this 1st time should have their HVAC license revoked......OMG... Great job on fixing it !!!

@julioq6977 4 года назад

The run coming of the top seem to have a hard bend. Could that have been avoided with an elbow? I couldn’t quiet see if you address an elbow. Great videos man!!! By far one of the top HVAC channels on RU-vid.

@smvideonow 4 года назад

Agree. Good observation. Doing the right thing isn’t hard. All you need is a sense of pride in yourself. This guy is a badass tech. And quality what he’s producing.

@picklerix6162 3 года назад

I was thinking that he was going to put an elbow in there too.

@ZimZam131 2 года назад

He also crisscrossed two of the duct lines (see 5:20). It looks like it was because the two outlets that shared a side of the box (3:56) were different sizes and he got them backwards.

@virtual_bomber5698 2 года назад

The fact he got the ones with dampers in them as well really gets under my skin. You do not need those things, they always cause problems.

@christophermac1797 4 года назад

Started hvacr school here in PA! I’m excited to finish & get into the trades! Thanks for the content!

@smvideonow 4 года назад

Tip. Don’t be mediocre. Make it a goal to be bad ass. Read and review and visualize. The truth will sell itself.

@killin5pr33 4 года назад

How's it going so far? Is it complicated? Interested in getting into HVAC

@samstephens9152 4 года назад

Awesome work! Just began HVAC classes here in Iowa and came across your videos recently. I love to watch them because I’m able to learn from them and really see what the HVAC career is all about.

@zachnordby7765 4 года назад

This is a great video! I am currently enrolled in school for HVAC and we just reviewed installation. This gave a great perspective on the consequences of poor duct work. And the process of re-installing ducting. Thanks for the resourceful video.

@HVACGUY 4 года назад

Hey Zach. One of my employees introduced me to one of your videos, about a package unit dolly. I’d love to have one. But wanted to say. Your videos are a nice compliment to my instruction. Keep up the videos

@David-lf2ne 3 года назад

He sells the dollies. In Another video he says to contact him by email if you want one. His email is in the in formation/ description section for the video.

@David-lf2ne 3 года назад

Search for his video “ When things go wrong”. That is the one where he talks about selling the dollies and it has his email address.

@CarlosMartinez-xv5zd 3 года назад

I can see you will be a very busy man in your life time! Keep up the great work!

@robertwood9628 3 года назад

Nothing wrong with flex IF it is installed correctly. Not using galv elbows at the drops and keeping the flex as taut as possible and properly suspended will increase the static pressure dramatically. I taught ducting for several years and that is one of the most understood and overlooked areas of the hvac industry.

@TonyWadkins 4 года назад

Sloppy installations like that just makes me a bit nauseous and mad. I'm a bit addicted to videos showing bad workmanship. Thanks for the fix!

@smvideonow 4 года назад

Agree. I can’t stand mediocre techs/installers/people. Be the best you can be. Do the right thing. Be proud of the product of your labor.

@antonsoldo3161 2 года назад

22 years in in HVAC business in Chicago-land. God job , you did improve this bad install for sure. The run coming of the top looks like have a hard bend. Allays add an hard sheet metal elbow regardless on return and supply duct when you have a hard bend. Flexible ducts are used for straight run nor for sharp bend. Flexible duct cases turbulence and slows down air pressure. I rarely use flexible duct, only in rear occasions . Positive thing about flexible duct is less time consumption.

@luisg1698 4 года назад

Great job man. You’re definitely staying true to your company name!

@cpaul57 4 года назад

Look like a DIY job by Mr handyman...the initial, not after...lol

@integrity5264 2 года назад

nice video, like that no,no,no waving finger. Thanks for posting

@Morningstar_-ed8xf 3 года назад

Hey man, just started helping out with installs with a local company and your vids have been really helpful as a learning resource, thank you!

@dalegribble1258 3 года назад

Sometimes you just gotta do the dirty work no one else wants to do, good job and great video.

@CHOMAHOMA 2 года назад

You gotta be kidding me. I can't believe those gaps. Still, knowledge vs experience huh!

@ibdad2 4 года назад

It's good to see you take pride in your work I'm in the Nashville area and got screwed over by ARS Wish I had known about you Sooner keep up the good work

@zemuszero5738 4 года назад

Omg you made a van to go after the coil box??????? Nicely done. You should come and teach every single HVAC tech in California how to do that. Every single retro fit I’ve done in this state has been crammed in there

@eb0800 9 месяцев назад

It really hurts seeing building materials wasted so wantonly by lazy or bad installers. We wouldn't need so many resources if we just used the ones we already extract efficiently. Glad you could at least salvage a lot and get things working as intended.

@vondarkmoor1 2 года назад

Holy cow, what a gap on that return plenum. of course they had humidity issues. They were sucking in a ton of attic air.

@2010twix1 4 года назад

Good call

@97Napkins 4 года назад

skip to the future...customer calls and still to humid or they say not working well according to them...now another trip out when busy ofc and you find same thing or maybe something else stupid happened. customer never knows all the proper work you did and now you wish you charged more. now you wish you had skipped that job that took all day long and caused you to be sore the next day from all that labor. you wake some days after saying I will never do that again or I will send installers out instead and just check there work...sweat free and not itchy, cut and bruised next time. work smart not hard boys! move on to quotes and easier stuff...send installers instead and save your body from a pounding. This guy is very good at what he does. I am a fan and he does awesome work.

@titom2916 4 года назад

How do this installers guys sleep at night knowing all the air gaps they left . Oh its not my house, but what comes around goes around. Great work bro keep it up! Im 100% positive airflow was better & healthier.

@MattFerguson26 2 года назад

4:32 Nice! I always thought just connect straight to the connection, adding that splice connection is nice and clean touch. Thanks.

@potentialhvac6074 4 года назад

Nice video bud! Professional documentary status

@dutch661 4 года назад

Good job way better then what they had

@BigWilldeClue83 4 года назад

Fantastic work! I just picked up all the same field piece tools over the summer, really makes a difference

@QualityHVACR 4 года назад

Nice! Yes I love the wireless setup, having all the info in one place in real time is awesome.

@kerrydavis2919 4 года назад

Great professional work!

@toddiamhvact7386 3 года назад

I think I saw the evap coil smile as you took that plenum off 😆

@CarlosMartinez-xv5zd 3 года назад

Alot of hacks out there. Thank you for sharing the right way if doing your trade!

@jamesgreen2729 4 года назад

Wish you were located where I live, love the Attention to detail.

@r1cky42 2 года назад

You make the job look easy and fun 👍🏽

@garyfu6143 2 года назад

Great video! Quality workmanship. Most importantly nail the root causes. Thumb upz

@DavidSmith-qg9ho 24 дня назад

The company who installed this system and duct work originally needs to be reported to the Better Business Bureau !

@martinmares8998 2 года назад

Another great video Zac. How funny. I just did a job similar to this one where I cad to replace wrong size supply plenum which had all sorts of air gaps. Some people do terrible jobs out there because they don't know what they are doing.

@eddiealvarado3531 4 года назад

Quality and professional work every time! great job keep'em coming

@QualityHVACR 4 года назад

Thank you!! 🙏🏽🙏🏽

@baitcasterdisaster8981 4 года назад

Definitely better than what was originally there, but that run out of the top of the supply plenum was choked really bad. Flex isn’t meant to turn that tight. Should have put an elbow on the collar or if there wasn’t enough height to do that, should’ve dovetailed the elbow in put it directly in the plenum without a collar.

@raycapella498 Год назад

This is an awesome video. Almost like a movie 🎥 🤣😂

@christiand.6112 4 года назад

Quality work, this is the way ductwork should be done. Adding mastic was key as well to get those air gaps sealed tight and keep that insulation from sliding back off the collar over time. My man knows his stuff.

@aireckhogan4718 2 года назад

That was some beautiful work brother!

@smvideonow 4 года назад

Dude! You are bad ass and you give a fuck about doing the right thing. There are too many mediocre techs and unethical companies out there. You stand alone. Keep it up. Big shout out from California.

@BA-pg4od 3 года назад

One can make a job just going back and fixing issues like in this video. We fixed a 1/2" tapered down to 0" hole that was about 20 inches long. It was at the beginning of the supply duct. It had been pumping our air outside for 10 years or so. All the guy had to do was hold it up when he screwed it to the unit. Also, no tape or mastic either. The outcome is we now have more air coming out of the ducts than before.

@rgluna70 4 года назад

Great job bro!

@wayne1141 4 года назад

You are a very good A/c Tech.

@nickh6611 4 года назад

Looks like the same exact custom boxes we pick up

@eprofessio 2 года назад

That is crazy that the duct was not screwed in. They must have run out of self tappers and never went back to finish.

@SomnoNaut 3 года назад

Love how you let the work tell the story rather than trying to talk through your mask. It was such a poor install that the story is evident. Very nice videos.

@rdcsclimatisation7401 4 года назад

Keep the good work coin ZD bless.

@christophermiller8046 2 года назад

Speechless!

@robertedgemont 2 года назад

I just bought a Veto bag through your link at TruTech Tools. I also used your discount code and saved 8%. I hope this helps the channel and thanks for the savings.

@marwinalves 4 года назад

excellent video, in short quality and desire to do things right!

@antoniol2391 4 года назад

Great job! 👏👏👏

@picklerix6162 3 года назад

Most of the homes in Houston have horrible ductwork.

@tredogzs Год назад

In my area, Heaters are in the basements... and we run ducts under the floors... and there is no AC!!! hahahhahahaa

@MrCmgl1 4 года назад

Great job as always. Keep up the good work.

@Bowtiechevys 4 года назад

Great job

@tompenny9352 3 года назад

good vid. Thanks. Wish you were in DFW.

@zipperdingo6385 3 года назад

Great HVAC tech, by the book

@mikemart8475 3 года назад

Looks great

@ionlybuydodge 4 года назад

Cant wait for the next video!

@jawidofkoj2998 3 года назад

Excellent!

@stephenhuey3182 4 года назад

Do you ever do videos where you show how you troubleshoot issues with systems? I’m in a trade school for HVAC and only 2 months in to a 10 month training. Would love to see some videos of how to troubleshoot issues like this or even ones about the electrical components as well.

@QualityHVACR 4 года назад

I haven’t yet, but I will.

@danielriverafigueroa 4 года назад

El mejor en hvac en youtube, te felicito por exelente trabajo como tecnico HVAC y calidad de videos. No te detengas por favor.

@smvideonow 4 года назад

Bien dicho Daniel. Ay muchos pendejos que les vale madre la calidad de su trabajo.

@chonghoshin6460 3 года назад

Great! Another lesson learned

@guybeavers6026 4 года назад

You play a mean piano for a HVAC tech.

@johnnyzsalt5374 10 месяцев назад

Finally found a couple of vids to help me with my problem. This one and your one on building a plenum. I got dealt a crappy hand with my house and have old lazy 10 inch ductwork with asbestos, and dents in it from each time someone bumped their head into it over the years. Nobody will touch it until that assbestos is gone. So I was freaking out a bit but then I remembered my old Navy training and it all came back to me. Turns out I just need to gut everything, including the boots, and replace with a new plenum so I can cut a new take off for the new ducts. I was just wondering if you had a way to ballpark what size I can get away with. I have 5 vents and 2 intakes. Want to see if I can get away with running 6 inch round from the takeoff. Was going to go maybe a 12" to 6" tee for the take off and run that maybe 20 feet one side of the tee, and directly above for the other side of the tee. Figured air might be like networking or water where you need twice the flow to supply 2 outlets with the desired flow. If it were 3 outlets, would have to do 3 times, so 18". etc.

@DTCM-XC 3 года назад

Totally forgot you used plenums that are insulated on the inside lol

@pearlperlitavenegas2023 Год назад

What alternatives are there? Thx

@DTCM-XC Год назад

@@pearlperlitavenegas2023 sheet metal plenums that are wrapped in fiberglass insulation on the outside.

@ATeamAdam 4 года назад

Great video

@andrewgilbreath1331 4 года назад

One pro to another awesome job man no excuse to do shoty work like was there to start with.

@Jugc0006 4 года назад

Nice work as always

@ND-fy3wu Год назад

ooops, that was really a garbage flex installation, maybe some diy style? good job, and I like your videos very much, thanks

@Ockhamcool Год назад

Great video! I wish more contracting professionals were like you. Man, what a horrible install! I'm sure they paid top dollar for it, too. Naturally, there was a permit pulled and the city probably "inspected" it too. 🙂 The whole racket makes me sick. Substandard work, complete disregard for engineering specifications from HVAC manufacturers. OBVIOUS "I don't give a s**t work standards...but it is O.K. because "I GOTS ME A PERMIT AND AH HAVES A HVAC CONTRACTOR LICENS!"

@mr.r9505 4 года назад

Man what a fucked up first install job glad you caught it and corrected it!!

@bigdaddy4975 2 года назад

I don’t know if you purged that line going to the recovery tank but I hope so. 😂

@tmbgfan5 4 года назад

solid work as per usual! you are the man.

@QualityHVACR 4 года назад

Much appreciated!

@chrishernandez07 4 года назад

Awesome work

@MrDonaldstepp 2 года назад

On the return I would make an access door. Easy way to do it is get a stick on door. Cut a hole with hole cutter and slap door on add screws and seal up