We can use this for helping our moms in kitchen. We can monitor the temperature and LPG (leaking or not) from that we can turn on chimney or exhaust fan using relay. We can also turn on gas using Google Assistant also turn on light. Mothers have to see whether the water tank is full or not so that she can turn off the motor for that we will use water level sensor to check level of water in tank and to control it from Google assistant and IFTTT. We often open fridge without mother's permission so we can fit motion sensor so that mother will know that fridge is open. She can also control electrical appliances like Fan, Light, juicer etc. used in kitchen. Thanks .This was the best IOT tutorial by u..!!!
Firstly, Thank you so much!!! Your videos helped me a lot in learning about IOT. I'm from ECE and your videos are the best to know about many of the electronics especially nodemcu. I'm very much inspired by your videos and started doing simple projects using nodemcu. I have a project and idea which I am posting it here. Please do make some suggestions. I want to make a fully automated smart home that can switch on or off lights whenever you enter the room. You can also be able to control them using voice commands(using IFTTT and google voice assistant). You can also be able to control the devices like AC.Whenever the temperature is high (using dht11)and when it detects a person inside the room(using PIR sensor) , it automatically switches on the ac and gives a notification to the user. The project also focuses on security.Whenever we aren't home, and when it senses a motion before the door, it sends a notification to the owner.Picture of the person who is infront of the door can also be sent to owner.By setting the PIR sensor in a particular place or keeping the pressure sensor under the mat before your bed and collecting the data from some specified time in the morning we can identify when the person wakes and can automatically turn on the geyser and send some notification to the user.
Finally the wait is over. The project of yours was far better than what I had expected. This project will help me making my btech final year project and it will be definitely very different from others projects. I would like to add door lock and unlocking system in this project and will try to find more of its applications.
I would use service for my grandfather's projector screen, he likes to watch movies a lot and is not very healthy to walk around and turn the screen down. Even if you don't give me the PCB , this video was so helpful that I can make my own
Nice work what more can be done is using magnetic switch as door sensor and turn on light when the door is opened. This will make the actions quick as soon as we open the room we got the room lighten and save the time of taking phone out and asking google . We will take oyr seat and then ask google what else we want to do. Really love this project and had made 2 projects working( for room) from your tutorial and trying to make whole house automated.looking forward for the use of servo. Nice work keep it up
I will use this PCB in developing the project which I'm making in our college and this can be used to control machinery in the risk probe areas of certain industry and in mines,and for developing a better projects to reduce the risk of human life
people use teamviewer and other softwares for casting and controlling pc from large distances, but problem comes when the pc is not turned on. so we can integrate it to turn on the pc. it should be applied where human errors occurs the most, like when someone turns on the water motor pump and forget to turn it off. it can inform the user about it and make user turn off motor or automatically turn it off. it can be used to toggle headlights of cars in case someone forgets to turn it off. it can also be used to make car send location when asked and start vehicle and also to open or close garages. it can be used to lock or unlock general home locks. it can be used to limit usage of electronic gadgets used by children, so as to reduce their exposure to radiations and reduce wastage of their time. we can command it to turn on toaster and coffee machines to as to prepare our breakfast while in bed. thanks for such a great guidance you provided through this video.
Great 😎👌👌 Your tutorials are well explained and very easy to understand. I learnt ESP01 from your tutorials. Will start with 12E soon. Thank you so much😊
Insert also feedback system like if light 1 is and again you ask to google assistant "turn on light" then it will give you massage that "your light 1 is already on". And add one status tab to give you status of how many appliances are on/off . energy consume by that appliances (optional this energy measurements).in energy measurement you can get how many hours your appliances are on. Turn on light on/off timer.
Hi, I'm doing this project in this semester. I got a doubt on attaching hardware appliances to relays. Could you please upload a video on connecting fans and lights to relays.....
Hi sir I'm going make this project. I'm startd designing pcb board but i have i doubt ''where did you use the PIR motion sensor in circuit?'' and connections of the relay "what did you connected between D0 and GND of the 9V?"
If it will take 20 sec to read data so when will it turn on the light bro as it is continuously reading lot of sensor there will be a great delay if i am wrong please correct me and please if you can explain the code more briefly
i have already makes the project of light control by ESP866 in Blink but today i think something new add my this project so seen your video and this is really so good and i have new idea for this but I'm not saying at this comment box. keep it up sir ... 👌👍❤️😃
Sir I just love this video and wanna going for this for submission for my major project.i have learnt what you have discussed.but could you pls tell me how u have connected the sensors which is hided by aluminium foil?I request You kindly Teach Me How U connect all the sensors and finally how it will be connected to Room Electric Board? Awaiting For Your Reply Sir
Hey, I need the Sensor Data on Google Assistant. For example, Me: Temperature at my home Google Assistant: replies (reads the sensor value from Adafruit gauge) The temperature inside your house is 28 degrees. How can Google assistant READ data from Adafruit?
Stairs case wiring For controlling through mobile as well as Board switch's Both are we can use if mobile person is not there in lab so, we on off Appliances using switch's also.
Hi, I'm trying to get in touch with * PCB * so they develop my board like I do? and in the case of this donating to this helping the friend there can deposit in the ticket no?
This is great except its using premade services from other vendors, plus everything you do is recorded by google. If you can remake this without adafruit and ittt and google, maybe it would be something you can say you built.
How can I request the DHT11 sensor temperature or humidity via IFTTT with Google Assistant? I ask: “tell me the temperature” and he says "the temperature is number°C" I ask: “tell me the humidity” and he says “the humidity is number%” do you know how to do it?
When the power goes off , how will you save the last state of the relay so that if ur relay was at LOW state last time, it will remain at the same LOW state after the microcontroller is powered up again ?
Hey i try using your code and modify my adafruit account and ifftt but the problem is im failing with connection with MQTT i dont know what is problem can you help me with this??
great job. a question, Can you check the temperature of sensor troung google assistant ? example: "ok google" .... "how is the temperature of may room ?" . .. and google respond " the temperature is xxx" regards
good work. I think it should be useful for everyone. can u make this device which helps people without voice command.( sensing room teperature switch ON the fan, sensing light intensity switch ON lights)
hi good day i try this project but when i'm putting the code to the esp8266 there where error showing up and the error was adafruirt_MQTT.h: no such file or directory thanks it could be a big help for me thank you in advance
Thanks a lot for your video and explaining. I think there are more precise temp/hum sensors DHT-22. You may use them in future (circuit is the same). I think this project is perfect for studing. And it would be great to add some multiply temperature sensors ds18b20 to increase the ability to measure temperatures and, for example, to make automatic fan control according to setpoint temperature. Please could you send me file for PCB board. Thanks and wish you great ideas for future videos and projects.
1) It can be used as for agriculture field ( research field ) to know wheather temperature and humidity ,wind sensor rain detector all the sensor data and some out put devices from relay it connects to motor pump At night time automated bug Hunter setup will works totally the efficiency of this field can be increased and efforts will reduce by predicting the wheather Also make a IoT gardan 2) Also it can make a complete home automation for single living people because they the have to make their job easier via controlling appliances via internet 3) The 3rd thing Maybe a stupidity!! Because, it's my imagination and if it possible only internet on space!!! whatever if it all implemented with all kind of sensors like light, temperature, humidity, magnetic field sensor,flux sensor, accelerometer, gravity sensor and all kind of gas sensor fixed on single board it can be act as a satellite and can launch with helium balloons and it can travel up to 30km and to over come the layer to make a small rocket like vehicle it can control by the relays...😎😎
Mrunal Dhoble One of the best thing it can be used is to Design a Smart Locker along with a Safest Locker room.. which must be equipped with a locking system using servo Motor and even we can track if anyone break's on to it using some essentially sensors and even we can place a servo lock system outside the locker room so as to quickly lock out the door from outside itself when opened without self access(using coding which will create auto-locking of the Door or manual command from phone). No need to fire a theft F.I.R as u'll get ur thief locked up in the locker room itself.. just needs a gud mechanical protection supported along with the locking module on the door. Plz let me know if this can be useful bro, and if yes.. i hope m in for the give awayz..😆😉
Hai, This is really a wonderful project and well documented. Thanks for publishing it. I tried it and it works fine but, if I have a slider to adjust the fan speed it will be still Great addition. Please suggest me the additional code lines in Arduino to incorporate this feature.
it is good but it is not enough , i m also want to make home automation project which also count visitors with help of ir and in case of electricity power cut they notify me , if someone can switch on\off light it notify , and it has call based operations system using DTMF for secondary options , door lock and unlock function and later on i m include R pi to add AI
i have implemented the same project using Blynk app so its quite similar I designed my own pcb using the same way just wanted to ask like a fellow brother asked, can we get google read the temperature value when give a certain command, any assistance would be appreciated and obviously these videos are worth a lot for helping people like us who are on a basic level Thanks
Bro can you tell how you did it ? Because Im also trying that but after uploading the code the ESP8266 stucks at Connecting to blynk-cloud.com:80 and Login Timeout
Nice Vdo. Sir, Good Job.......If i m luckey person then i help to a handicap people who can't walk, nothing they do ,so if i get this great device so i can hepl them and fulfil their need. sorry for late comment, if u have one then give, thanks a lot sir
thank you so much for your super cool explanations, I love your patience, I also love to recommend your videos to my friends, I'm looking forward to more awesome videos, thank you :-)
I want to implement this project on my college. My college is an engineering college and college is very big and has many buildings . So, There is a problem arises on switching on off the light of classrooms, labs , department and other places for the working peoples. So, by implementing this project we can omit this problem or you can that will be easy for them control things from any place. Also I want to implement this project like that I can control the light fans by normal switches and by this project. So, there will be manual option for some emergency. Also I want to add servos to control the speed of the fans by existing regulators,temp and humidity sensor and pir sensor.so,I want those circuit boards for initial testing or you can say prototypeing in my college...
I stumbled on your channel 12 hours ago and have binge watched over 10 videos today. You are amazing. Could you please send me the gerber file for this project. I would really like to try this out. A noob in automation but i dont mind the challenge if you willing to assist.
Thanks for your valuable response. Please suggest the link for the same. I have done a project with node mcu and relay module. But I wanted this to be on same pcb as you have done. Please share the link for pcb and BoM for the same. Thanks & Best Regards, Rupesh Avinash Salvi