Google Assistant Home Automation using NodeMCU Esp8266

Подписаться 65 тыс.

Просмотров 141 тыс.

50% 1

Google Assistant Home Automation using NodeMCU Esp8266
This video tutorial is adapted from the channel : Techiesms
Subscribe to Techiesms : goo.gl/BBmJPT
Make your own google assistance Home Automation system using Nodemcu esp8266 , IFTT and Ardafruit.io
SUPPORT OUR CHANNEL to grow, so that I can make more videos like these.
Here are the ways by which you can contribute :
1. If, my videos helped you in making your projects then, please help me financially by donating some amount
PayTM UPI ID: roboshala@paytm
BHIM UPI ID: roboshala@upi
Tez UPI ID: roboshalaindia@okicici
PhonePay UPI ID: wahskola@ybl
(-------------------Even a single penny counts for me---------------------)
2.Whenever you want to buy products from Amazon/Flipkart
then follow these links(affiliate) and then purchase your desired product.
Amazon : amzn.to/2eJDER4
Flipkart : goo.gl/gaHK3A
**Compare and buy the cheapest one....all are equally good :
NodeMCU Esp8266:
Flipkart fkrt.it/f8rSSTuuuN
Amazon amzn.to/2xRTMZd
Arduino Uno:
Flipkart fkrt.it/d7hZATuuuN
Amazon amzn.to/2eJi9jr
Jumper Wires:
Flipkart fkrt.it/fs3DKTuuuN
Amazon amzn.to/2xdEe50
3. I think you can do this now: Share this channel with at least 4 friends.
*Please Comment your views for the improvement of the tutorials*
For Codes and Written tutorials, Visit: www.roboshala.com(to be updated soon)
Code: goo.gl/BvNcST

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 364

@yogisinghindia7857 4 года назад

india ka sabse best channal

@sagarbhagat6033 5 лет назад

while(1) { Serial.println("Thank You Sir..."); Serial.println("Thank You So Much..."); }

@saikrishnabobbili8002 5 лет назад

Bro iam a ECE student (polytechnic) iam facing a problem while dumping a program into NODE MCU 8266 in board manager it is not showing node mcu board so plz rply me fast I have to submit my project

@SaiKrishna-un5pc 5 лет назад

Same problem baya

@monsterzsai4181 5 лет назад

@@SaiKrishna-un5pc same problem bro

@RoboShala 5 лет назад

Hi, Make sure you have added ESP8266 board in Arduino IDE. Please, go through Getting Started with Esp8266 video.

@saikrishnabobbili8002 5 лет назад

@@RoboShala yes bro we follow your viedo

@nethmasandeep5828 4 года назад

i have problem while uploading the code : D1 is not diclared in this scope .please help enyone

@technicaltrainings6429 4 года назад

THANKYOU SIR AMAZING CONCEPTS AND FULL EXPERT EXPLANATIONS

@manuelmarrero7353 4 года назад

Saludos desde ( Islas Canarias / España) Muchas gracias por tus vídeos . Te deseo lo mejor .

@thonyfrank6721 5 лет назад

Hello a question that happens if I have the library of ESP8266WiFi but I mark an error that a file is missing in the library downloaded from github or is from another page

@vipul-pawar 6 лет назад

pcb ko dekhne se esa lagta he ki home automation ki aap series bana rahe ho or muje lagta he iske baad aap dht11 or real time sensor use karne wale ho na , sir kya me adafriut io ki jagha blynk use kar sakte uske code easy he or vo bhi ifttt se control hota he or uska app bhi he jo virtual remote provide karta he , per jlc pcb aapko costly nahi padta vo 24-30$ leta he delivery charge

@FarhanKhan-io3vt 4 года назад

Can u please show the connection of all devices please 🙏🙏 I have to make this proj and want to know the wiring connections

@Robin2bin 5 лет назад

Ver good! But my question is can we use this to operate appliances from large distances...

@maazshaik6514 4 года назад

Thank you bro love from Singapore i try bro

@pbspeakers6313 3 года назад

sir but now we can only make 3 applets and it is getting difficult and suggestion..

@mr.perfect4476 6 лет назад

Which software is better for PCB designing? Easy EDA or EAGLE?

@sohamsaha1422 3 года назад

ifttt only allows 4 applets, any alternative to that?

@dassajityadav5555 4 года назад

iftt is paid any other option sir after 3 step ask for payment

@immortalgenesyt6810 4 года назад

Hey brother really inspired by your video.. I jus need a help.. I have made the circuit.. Wen i turn on using blynk.. The led on d relay lights up but when a bulb is connected it doesn't glow and my relay doesn't do any click sound.. Plz help.. M jus a 12 year boy.. N i have assured my parents to make this n if i be successful they ll give me more components please help

@dnyaneshwarkundale5161 3 года назад

Sir Touch moduler switch development karana hai

@tandelh-war8134 3 года назад

Are you able include manual switches also????please!!

@asadkhan-de4lx 5 лет назад

dear what is controlling range of node MCU and voice assistant , I mean how far we can control appliances ?

@vaibhavasinha8296 4 года назад

Sir How many years can node mcu can be used without stopping..please reply.

@been_there_done_that17 5 лет назад

hi roboshala I followed this video thoroughly, i am stuck, let me explain in detail. my google assistant is working fine, but i dont see any output on the node mcu side, the node mcu is connected to my wifi, it was reflected on the serial monitor. As soon I give the command using google assistant it accept the command but nothing happens at the hardware side. I have checked the output pin before and after give the command, both the time they are reading zero at multimeter. Pls help me. And one more things ur gerber file is not working with my eagle cad software if it is okay to share the schematic. that will be really be helpful. Thanks keep the good work

@bhaveshgosai0 6 лет назад

Sir mere Ghar par 15 se 20 light he etani sari light control karne ke liye kya karu....plzzz tell me.

@rohitkumar-up7cv 4 года назад

Relay module Kitna use kiye ho???

@DeViLsCrEaTiOn 5 лет назад

Hi, I have a question. can i power up a 5 volt 4 channel relay module with a 5 volt 0.7-0.8 mAh wall type charger, which is basically use for charge the simple mobiles. If yes, then how i connect, i mean what will be the circuit diagram. which wire will be connect with the vcc and which wire connect with the ground and which wire is connect with the ESP8286. OR, ESP8266 nodeMCU board 3.3volt is sufficient for 4 channel 5 volt relay? i am try to built a home automation project. Thank you very much. Please help me.

@englishinsambalpuri9364 4 года назад

While compiling the code ,It shows "D6" is not declared, what I have to do ? Please help me.....❤️❤️❤️

@chhatramaniyadav7707 4 года назад

Upload karte samay error aa rha h Adafruit_MQTT.h: No such file or directory give me a solution

@AVAVines 4 года назад

Yes same here, Please help

@the.muscle.madness 5 лет назад

but my project is not working while i followed your all step and all was going well but at last when i checked via google assistant it didn't work can you please help me to do that, i will be very thankful to you if....

@anonimking631 4 года назад

Thank you man but how can i connect the relays with the nodemcu with wired do you understand becaus i have nodemcu and relays separately

@amanmittal4232 4 года назад

the code which you have given is wrong compiler saying there is no such library #include "adafruit_mqtt.h"

@technicalsaikat3502 6 лет назад

Thank For share Project Dada I am Create This Project Then Succesfully

@astitvachauhan4173 4 года назад

this code and circuit is correct or not

@dil15380 5 лет назад

Perfect work for me, additionally How to control both light if i put source code for light 1 and light 2

@divyanshurathore4263 4 года назад

Why did you use DHT11 in this project? What is its use here?

@omkarpandharpatte 5 лет назад

How to get status of light? Either on or off using Google assistant... Like... Hey Google, what is status of light 1 ? Please make a video on it if possible.

@yadavamaresh4796 5 лет назад

nice sir, but agar hame ye 4 relay 1 saath ON OFF karvani ho to kya karna padega ??? i had tried but not sucessed

@ajaynetha143 5 лет назад

Does it run on internet.... Or both my phone and nodemcu must me connected on to the same WiFi..... I just wanted to know... Can we use it from anywhere ? Or just to a limited space where my WiFi can reach...

@pramodneelu8135 6 лет назад

Nice explanation. Mine working smoothly. But i need to change one relay as an one second impulse relay. What are the changes i need to make in code and adafruit-ifttt settings

@priyaranjan5675 6 лет назад

If am using Arduino Uno and esp8266 01 do I have to install more library?

@ramenmandal4512 6 лет назад

Sir I request you that, Please up PCB design korneka pura tutorial ka ek irises banaye. Please mera request accept kijiye or video banaye. ThankYuo....

@factsabouteverythinghere 4 года назад

my node mcu is not showing connected in serial monitor meaning it shows some thing diffrent

@chinmoytahbildar3278 6 лет назад

my phone(galaxy s4 mini) doesn't support google assistant... is there any alternative sir ?????

@vedantsuthar8992 5 лет назад

HELLO THERE, I WAN TO ASK YOU ONE THING THAT IN STARTING OF VIDEO YOU ON/OFF BULB USING PHONE,SO HOW DID YOU DO THAT?BASICALLY I WANT TO ON/OFF BULB BY PHONE APP USING ESP8266,SO HOW CAN I DO?

@projectmail1629 5 лет назад

sir google assistant is working fine ... but the module is not getting connected to mqtt server. serial monitor is showing Connecting to MQTT... Connection failed Retrying MQTT connection in 5 seconds...

@dipanr29 6 лет назад

Bro, the nodemcu isnt taking any commands after say 7-8 mins of inactivity. I have checked log, kept mqtt connected checking and reconnecting and print statements in serial monitor I just noticed that after 5-7mins, suddenly MQTT is connected and after that no commands are being responded.

@bhupendrasingh4697 5 лет назад

Sarji 1 video water level controller nodemcu ultrasonic sensor par Bana dijiye Jise Hum net ke Madhyam se kahin se bhi control kar sake aur tanker level bhi dekh sake

@MK.1201 5 лет назад

Nice video and everything is working properly but I see it takes time to take action after the command as it's connecting more than 1 server so is there anyway to make it fast?

@sajithpittan9602 5 лет назад

Code compiled success fully, but boot is failing with details "ets Jan 8 2013,rst cause:4, boot mode:(1,6) wdt reset". what went wrong. Also #define Relay1 D6 is not accepting so gave the pin number directly in pinMode(6, OUTPUT) this gets compile success but boot gets failed. please help. using the same code got from github

@yash561 5 лет назад

Hey Buddy, first off all thanks for beautiful video and explanation, I need to ask you that How can I turn off all the light using one single command like "Ok Google, turn off all the lights". and 2nd thing that I want to control lights via voice commands and the app that you created in the previous video. Please help me. Thanks a lot buddy

@practicalbong1497 6 лет назад

Sir can you make a specific video on 4 channel relay making and understanding about how it's work

@mohanthakur6455 5 лет назад

Esp8266 nodemcu ke range matlab kitni duri tak kaam karega bhai. Please reply me bhai

@malikshahzadali4963 5 лет назад

project is good butt when device is idol for 10 min when device is not response till restart the device can u tell me that problem thanks

@deepakjet-planesrobotic9788 4 года назад

is it necessary to install google assitence in laptop before coding

@istekharalam6108 4 года назад

Very good bhai or projects banao please

@sushantamajumder5879 6 лет назад

sir i have a problem while compiling the code that d6 is not declared in the scope

@khushsharma 4 года назад

sir i want to connect google assistant with firebase data and app created by mit app with the help of your last vedio .willl you tell me how to do it.there is no applet for firebase on ifttt website

@jeremytiempo9639 2 года назад

what is "LIGHT1" stands for?

@yatharthkumar682 5 лет назад

Is it reliable for long period and household commercials

@bipradipkushari1002 Год назад

Fatal Python error: initfsencoding: unable to load the file system codec ModuleNotFoundError: No module named 'encodings' Current thread 0x0000310c (most recent call first): exit status 0xc0000409 Compilation error: exit status 0xc0000409

@vishaljain6130 4 года назад

Can I buy JLCPCB circuit board from retailers in ahmedabad

@deepakmourya_6994 6 лет назад

google assistance showing that "those light haven't setup yet"... what should i do

@rolexroll 5 лет назад

This project is good bro...... But how to connet a mobile to nodemcu8266...... I think connect via Hotspot........ Thats correct.... Please must reply bro....

@ksheerajasricharanyan3177 2 года назад

where can i find the hardware setup... please provide the link

@s.l.p-technology4932 6 лет назад

App code ko follow kiya but upload hone ki bad sab relay eksath on ho ja Raha he or mqtt connect jabtak nehi hota he tabtak on off .. on off ho Raha he. So please help me sir !!

@deeseal9269 6 лет назад

its work very fine..but some problam..jab relay 1 on he..tab agar me relay 2 on kar raga hu to relay 1 off hokar relay 2 on ho raha he...as same time 4 relay not work...1 off...other 1 on....i need all relay on same time..example aga mujko tv,fan or light aksat on karna he..mara problam ha..tv on ho raha he to fan ro light off ho rahahe..or fan on kar raha hu to tv light off ho rahahe...plz hlp me..how work 4 ch same time..

@shubhambondre6833 4 года назад

Brother, i have a problem with NodeMCU, when i connected it to pc, it heatup what's the solution of it...?

@phonefixpaisley8708 4 года назад

Greeting from U.K

@arpanthatavarthi833 6 лет назад

I have used a relay module instead of the PCB and connected D0 D1 D2 D3. I have compiled and loaded the program. I am getting the trigger after voice command but the lights are not switching OFF. after successful connection all the lights are ON and not turning OFF

@RoboShala 6 лет назад

You might have done something..wrong on applet side..for turning the appliances Off . Please, watch the video carefully once again and follow each steps carefully.

@patelsarvesh63 6 лет назад

Sir.. everything works perfect for 10-15 mins. After that...esp8266 nodemcu hangs. The google assistant responds perfectly but the esp8266 hangs and doesn't give any output at it's digital pin after 10 mins of every reset.

@balaramaraju4135 5 лет назад

You need to modify line to "while ((subscription = mqtt.readSubscription(5000)))" in the place of 20000 replace 5000 and replace baud from "115200" to "9600" it will work perfectly

@pccare6282 6 лет назад

how to Light, Fan, and Dimmer Control with ESP8266

@atan1991 4 года назад

Everyone: "Oh look he can connect a NodeMCU to Google Assistant" Me: *Eminem's rap god intensifies* Btw im actually here for my project

@RahulPandey-ol3jg 6 лет назад

Hey Alok thanks for this tutorial,But i had one ques as i facing it. As i connect Nodemcu with different wifi connections then it will not works & if i connecting with same hotspot with my phone then it start working, so plese tell me is it works with diffrent wifi hotspot if i m not giving it through my phone..if it is possible then reply me how can it will solved.

@farhan9235 4 года назад

Great project But I'am facing this problem invalid conversion from 'const char*' to 'uint8_t {aka unsigned char}' [-fpermissive]

@sheelapandey4903 6 лет назад

Bro can you please help me out a problem. Actually whenever the power supply goes off the appliances are turned on independent of their switch conditions in the blynk app. Please reply Thank you

@mdtabrejaalam6672 3 года назад

Sir, why All relay HIGH after power cut off

@mohitkundu6909 6 лет назад

how many relays we can connect with a nodemcu at the sametime ?

@hafizmazhar99 5 лет назад

Hello dear you are awesome! Plz. Tell me how it work without internet Bcz. some time inertet not work.. But also wifi connect with same device s ???

@vic0de 5 лет назад

Thanks for the video bro. What about using the system for day to day life. What is the life of esp8266 in such a system? Thanks.

@RoboShala 5 лет назад

Yes, ESP is reliable . And, if you want to hv something more reliable than this, then check Broadcom, CC3200 from TI but they are vry costly.

@5yasgaming151 5 лет назад

bro pls help brooo....coed error

@IdeasbySuyashDesai 5 лет назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Vz2EamgUyTA.html

@umerjunjoa4335 6 лет назад

good project.. i have one question , the Relays operating voltages are 5v but the signal coming from nodemcu is 3.3v isn?? how to control 5v relay using 3.3v?? plz clearify.. ty in advance.

@RoboShala 6 лет назад

So, through the video , once again. There i have used 7805 to step down the incoming 12V to 5 v that goes for powering nodemcu and relays.

@ersurjeetkumarhindustani3179 5 лет назад

Sir eski range kitni Hoti hair ye kitni door tk control kr Sakta hai

@dassajityadav5555 4 года назад

every month 4 dollor sir any other option by this we can use google asistant with node mcu

@gupchupwalaraipur 4 года назад

#include no such directory. Help Me

@yadavamaresh4796 5 лет назад

command me agar hame 1 hi input pe 2 relay set karni ho to kya karna padega?? please help

@surajkurdekar2827 5 лет назад

Plz can u tell how can our Google assistant from mobile connect to node MCU ?

@TechnicalMech 4 года назад

Sir me Pakistan se ho me ne ye project keya blynk app wala .par os me ek problem he or o ye he k blynk app se tu light on off hota he par google assetent se on nahi horaha .me ne jo command deya ta ifttp or webhook me blynk url sub kuch keya par Google assetent se on ni hora ha me jab bolta ho relaly 1 on Google. Reply me ok relay 1 on but actually not switch on. Plz rply me

@NilanjanChakrabortynillchak 6 лет назад

Sir, I am a beginner. for 8 channel relay I modify your program, in the time of uploading it showing memory space shortage. For 8 channel relay what is the solution.

@monikasingh4411 5 лет назад

I am not able to fix it ..............."connection failed Retrying MQTT connection in 5 seconds... Failed to subscribe "...plz help

@arslanmahmood8250 6 лет назад

hi such a awesome and helpful video, i did it perfectly then i create hardware to control the speed of fan, i do that through the slider, i am facing problem while doing this through ifttt. kindly help me please

@ofgradesolarsystem6351 4 года назад

My nodemcu not connected Wi-Fi SSID and password replace but not connected nodemcu 8266 please help me sir

@myyoutube2594 5 лет назад

Ultimate...I am gonna try this

@supritsahoo9057 4 года назад

I want to control 3 nodemcu in one app to control more relays in one app , what to do to this

@shabuzhossen182 6 лет назад

i am from bangladesh...i am your follower....sir i have a problem...my phone's android version are 5.1 lolipop .....i can't able to connect google assistant for ok google voice command ... please help me..i seen many video.but my phon's not worked

@israelbr4019 4 года назад

Porque no puedo poner más de 8 salidas ya intenté poner más y no me enciende las que no tienen D

@mitunihar 4 года назад

Mujhe ye apne kamre me lagana hai isse banane k liye help karoge?

@rkrakib4229 5 лет назад

Bro.. Konsi wifi ki name or pass isme dena hein..? Mere wifi ki? Or mere phone ka hostpost ki?

@nikhilp481 5 лет назад

Isme kitne ampere ka adopter use kiya he....

@amardeepsingh8769 4 года назад

Google assistant home automation me compilling D6 was not declared in this scope error aa Raha Hai

@arushigarg6203 5 лет назад

while verifying the code in arduino ide it is always showing the same error ' "light" was not declared in this scope', plz tell me how to rectify the error

@g_photography7573 4 года назад

Plz plz plz help me. When i am uploading the code to my board it showing the error that : selected serial port does not exist or board is not connected .plz bro solve it

@parthtrivedi4835 6 лет назад

Sir that was very easy to understand, thanks for the tutorial but Sir can we use the same process without that PCB , only with nodeMCU and Relay ?? that would be smaller and more flexible if it possible and i would like to request you to make a tutorial on GSMModule and the relay Regards Parth :)

@RoboShala 6 лет назад

Yes, you can make that too..using the module of relays , there will be no changes. Yes, will make tutorial soon on GSM module.

@parthtrivedi4835 6 лет назад

RoboShala okay sir...Thank you.. awaiting for GSM And Relay Tutorial