In this video we turn the boat back over and begin the process of prepping the hull for paint. That involves grinding off the old gel coat, fairing the bottom of the boat. Filling it with fairing compound and doing several different sanding operations to get the boat back to a nice fair shape ahead of the paint topcoat.
Here we look through the range of products that are used within the process including West System epoxy thickened with 402 milled glass fibres, 404 high density filler and 407 low density filling and fairing compound. We prime the boat with Epifanes high build epoxy primer.
In the next video we will be doing the final preparation and application for topcoat paint. I will also show my method for casting an epoxy pad in order to shim the prop shaft strut for installation and alignment within the boat.
Chapters:
0:00 Introduction
0:48 Turning the boat and assesment
3:40 Bottom grinding
6:00 Glassing the spray rails
7:34 First stage filling
9:35 Filling corners and edges
10:29 Fairing compound application
12:16 First stage fairing
13:38 Second stage fairing
15:27 Primer coats
17:09 What's coming next
I hope you enjoy the video. You can find me at all the places below for more info.
#boatbuilding #restoration #healey #boat #filling #fairing #painting
- Website -
danleeboatbuilding.co.uk
- Facebook -
/ danleeboatbuilding
- Instagram -
/ danleeboatbuilding
30 июл 2024
