GROHE | Rapido SmartBox | Installation Video 

This was way easier to understand than the printed directions in the box. My shower is done, I just came back for the music. ♫♫

Temporary big plug with 16 bars of pressure (1:45) will leak like crazy. Ours leaked with regular household pressure of about 6 bars soaking the ceiling below when left overnight. Grohe support stated that this plug supposed to be used only for flushing the lines and not left in for the installation of the walls/tiles. This video clearly shows using this temp plug for the wall installation. The temp plug also comes with only 2 screws. The actual cartridge with valves does not leak and that is what we used during the wall installation. Grohe: please correct your instructions and videos that mislead and might cause some serious damage!

My handheld comes on when I turn dial left, however the handheld is situated to the right of the showerhead. How can I revers this so that the showerhead which is on the left side turns on when I turn the dial left instead of when i turn it to the right. Does this make sense? I think my plumber screwed it up.

How do you install the wall union?

Ho tolto la vasca da bagno e vorrei mettere un box doccia. Le pareti sono state fatte con forato da 8cm. Con intonaco forse arriviamo a 10cm di spessore. La domanda che faccio è se devo necessariamente fare un controtelaio in cartongesso per poter installare il corpo del miscelatore e il rainshower smartactive. Non credo che facendo delle. Semplici tracce sul forato, riesco a fissare i due corpi.

Dear, I have a problem and I need to know how to solve it please: No matter how I install the blue knob, when it comes to regulating the water to be able to mix the cold water with the hot water, it cannot do so. either it comes out very cold, or it comes out very hot. It is impossible to regulate it to a warm nice temperature. Could you tell me what the problem would be and, if applicable, the spare part that I should replace to buy it. Thank you

Huh, I think some steps involving pipes would be handy.

It’s cool to learned with your video! 💪💪💪

I just had one of these installed. Now I can’t get my shower hot enough. Is there any way to turn it up hotter ?

Ого крутые технологии 👌🏻

جزاك الله خيرا يا هندسة

Что за тонкий ключ используется на 0:36? Не могу найти подобный

Left side plug no problem

Very nice work

that music is an assault on my senses

Super helpful!

SO nice👍👍👍👍👍 bast video💗💗💗💗

Nice

Good

Super good thanks

شرح اكتر من رائع👍👍👍

great video thanks for that

मैंने एक थर्मोस्टेट लगाया है जिसका प्रेस नहीं आ रहा क्या करूं

Классно 👍

👍🏻👍🏻

👍

missing information

круто👍🏻

👍👍👍👍

👍🏻👍🏻👍🏻👍🏻

Вау

im plamber you heva jobe

Самое слабое место для воды это шов а вы устанавливаете бокс и людей учите.

Grohe's written directions suck!! These videos are somewhat helpful. But, still lacking!

Not impressed ....First off there is no standard installation with that printed rough in garbage on the housing ,you have to use your own brain to gauge where to cut the pos ...The only thing that is accurate are the jig caps used to cut the stems....I personally had no problem installing this because I'm used to using a tape and installing things based off of measurements, it's how we do it in the Elevator trade but this isn't for a basic DIY warrior...The tech manual is useless and poorly illustrated an their live tech support is less knowledgeable than I am with plumbing...I do have a great deal of plumbing knowledge but shouldn't know more about Grohe's product than the tech support monkeys ...You also can't really get the valve to go to completely cold and hot you have to compromise one of them a little ...The volume control is a freaking joke too...Looks great but Delta makes a better product...I'll never use Grohe again when I build another bathroom,their engineering is goofy .

How do you install the wall union?

Вау