Ground Workers Screwed Us 

Maybe don't put the bollard on the lid tho??

Should never trust that pull cord (it snaps(a lot!)). Always replace with bt cord mate.

Replace the drawstring with some blue 10mm rope. Then use a Chinese finger trap on the cable end and tie the 10mm on. It doesn't hurt to lube the cable if it's a long run as well.

My god Nick is now mining for flex conduit now!

You,ve got one of those screwdriver shaped hammers , as well 😅

Just for the kids out there. The two 5.pole breakers are in parallel not series. I hope they are linked so as a fault trips both or that could have big consequences. I'm sure it could have been mechanically linked with a channel over the two arms. But as it's a custom made unit I'm sure it's all been properly designed.

Thanks so much for all your help on this job, enjoy my time working with you and can see a bright future ahead for us both ! 🎉

Here's me thinking DeWalt would be right up your street with it being the batman logo colours 🦇

Good video to watch Nicholas. Personally, I would have pulled a blue poly rope through with the cable (8'10") for possible future needs, such as Cat 6. When you used the step/ cone cutter on the alloy (9'50"), I would have sprayed the bare alloy with black paint to protect it, and (12'40") it is good to get a preview of the new Knipex electricians light duty, rubberised hammer. .. 😂😂 A nice looking install at the end of the day though, good one.

i would have probably complained to the building manager that the ducting was installed crappy... should have been separated, with the opening facing up to prevent ground water...

Because they laid it on a friday afternoon and thought bllcks to cutting the duct at every pit! Screw the sparks as always!!

Experienced many situations of contractors doing whatever is easiest for themselves and screw it if it makes things more difficult for anyone else😂

The van you head is called the "BapVan" I used to work for a company on that estate that ironically do ev chargers

And today Nick learned that, when following ground workers on to site, you ALWAYS leave time for fixing their work for them.

12:50 weird looking hammer 😂 Proper tidy looking job, though!! Good luck on a Doncaster Cables tour 🤞

Bollards are required iaw bs7671

You sure about that current rating chaps 122amps? What temperature are you running it at and what rating factors applied?

I can confirm leaving your van open in and around Doncaster is a terrible idea 😂😂 especially with the Milwaukee kit

Why not specify a charge point that has the built in fault protection? Does anyone else get annoyed when they are called chargers!?

At 16:19, what's the matter with the apparently switched PE? Why is that even legal to do?

you've corrupted me, as soon as you dark orrifice, I immediately jumped to thinking Adam's mum

Nice video - enjoyed 100%, thanks Nick. Loving the AI comments about 'camaradarie' and 'wealth of wisdom' - totally right of course...

I was on a job a few years back where the groundworkers installed ducting a metre deep but a bit like yours did it completely wrong. They ran a duct around the site but only put one tube to the access point and taped it to the underground pipe with tape. It took us ages to fish out the rope they installed but it was made more difficult by the two feet of water in the duct due to them using field drain pipe instead of actual ducting plus the taped joints.

by opening those mounting holes on the pillar, he just voided the warranty on it...

EV uptake through company schemes are always a good idea ... But some people can't do the Maths .... keep up the good work Nick ... it's all good money, Adams Mum sends her love.

How did you end up working in Doncaster? My home turf. The bap van actually calls at our depot!

Thought the estate looked familiar but the batman Sandwich van was the last clue in the jigsaw puzzle

using a cable sock would make the job easier just a thought pulling the cable through the ducting.

Almost missed the cameos from Margot Robbie and Megan Fox!

That's only tiny tiny breaker. Come back when you can climb inside one.

Looks like you're enjoying doing something different.

What is it with trades not thinking about what others have to do afterwards ?

You should create a line of Telly-Tubby dolls as the Bundy Groupies.

Well took me to watch until the very end for you to say about a visit to Doncaster cables for me to find out you are defo not in Bristol! 😂😂😂

Another cracking video Nick keep them coming! 👏🏻👏🏻🔥🔥

Are all those chargers going to be on a radial or a ring circuit, with all the potential current draw?

All sites ruin the ducts without fail there will always been 1 collapsed or filled with mud 😢

Nice work chaps, love a good commercial job.

Always Great Work 🧐🙂🇮🇪☘️

nice big dark oriffice nick!

Or is this the Birmingham branch?

Brilliant video ❤..good to have a change 👍

Make sure to power the Easee units and get the firmware updated first. I spent a long time thinking my Easee was screwed because the Megger EV tester kept on producing PE Errors and wouldn't test. After the Firmware update and reboot it was perfect.

Clown Shoes !

Must be Bristol if you got the bap mobile flying around!! 😂😂

lol!!

First

Which Easee chargers are they? Sure the Easee one has PEN fault protection built in?

What I don’t get is we all installing the odd charger at work but juts look how many cars are in that car park......this is so stupid it can’t be the future

Hope your up to date with you vaccines using dewalt stuff