GRR - Gage R&R Study (Crossed): MSA Tools with Examples | GRR Study

Подписаться 71 тыс.

Просмотров 138 тыс.

50% 1

Become A Master In MSA at: vijaysabale.co/msacourse
Hello Friends,
In this video, you will learn essential concepts from MSA. This is GRR (Gage R&R Study).
I have explained GRR with Examples for easy understanding and better clarity.
This video contains the following topics:
✅Concepts of Gage R&R Study (Crossed), (Nested), and (Expanded)
✅Selection of (Crossed), (Nested), or (Expanded) Gage R&R Study
✅Types of variations in Measurement System_ Repeatability and Reproducibility
✅Methods of Assessing Repeatability and Reproducibility_ X-bar & R Method and ANOVA Method
✅Gage R&R Study (Crossed) with a practical example in Minitab
✅Selection Criteria (Acceptance Criteria) for Gage R&R
✅Interpretation of results from Gage R&R Study (Crossed) in Minitab_ Session Window and Graph Window.
I am confident that you will like it.
The Important links about LEARN & APPLY:
👨🏫 About Me: vijaysabale.com
🏫 Know about LEARN & APPLY: learnandapply.org
📚 My Learning Management System (LMS): www.successfulcareerhub.com/p...
📺 Join this channel to get access to perks: / @learnandapply
0:00 Introduction
0:41 Selection of Crossed, Nested, or Expanded Gage R&R Study
1:35 Methods of Assessing Repeatability and Reproducibility
2:33 Gage R&R Study (Crosses) with Practical Example
3:13 Procedure to conduct Gage R&R Study (Crossed) in Minitab
3:55 Interpretation of Results: Session Window
6:39 Interpretation of Results: Graph Window
Join this channel to get access to the perks:
/ @learnandapply
Thank you for watching...🙏😊
#GRR #GageRR #MSA #Measurementsystemanalysis #MSAMinitab #GageRRminitab #Minitabtraining #sixsigma #leansixsigma #learnandapply #successfulcareerhub

Опубликовано:

8 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 85

@Bryvayne 4 года назад

Excellent video. Thank you for the concise explanation!

@learnandapply 4 года назад

Thank you so much for your valuable comments. Please share your friends and colleagues.

@ozgurtekcan8304 4 года назад

Great explanation of Gage R&R. Thanks for very educative video

@learnandapply 4 года назад

Thank you so much for your valuable comments and appreciation

@sifisomkhize3715 3 года назад

Thanks Vijay. You have unpacked the MSA very well

@learnandapply 3 года назад

🙏🙏🙏😊 Thank you again for your valuable comments and appreciation!

@kevinwright3141 Год назад

A brilliant video, many thanks! Really helped me conceptualise this better.

@learnandapply Год назад

Thank you so much for your valuable comments and appreciation! ☺️🙏

@wilawankaewmao3829 2 года назад

Great video! Thank you for the explanation

@learnandapply 2 года назад

Thank you so much for your valuable comments and appreciation ☺🙏

@harkiratsingh7014 5 лет назад

Very Intuitive, Thank you for putting this together!

@learnandapply 5 лет назад

Thank you for your valuable comments....

@ishaqhussain3892 Год назад

Very well explained, much appreciated.

@learnandapply Год назад

Thank you so much for your valuable comments and appreciation! 🙏😊

@elisagiammarini7659 4 года назад

Very useful. Thank you!

@learnandapply 4 года назад

Thank you for your valuable comments.. Please share it with your friends and colleagues..

@sujalpanchal7079 2 года назад

Very helpful! Thank you very much

@learnandapply 2 года назад

Thank you so much for your valuable comments and appreciation ☺🙏

@bhaskarallada8512 5 лет назад

well explained... keep it up

@learnandapply 5 лет назад

Thank you for your valuable comments...

@Sanosyenforma Год назад

Great video, thank you!

@learnandapply Год назад

Glad you liked it! Thank you so much for your valuable comments and appreciation 🙏😊

@marysanchez2752 4 года назад

Is a great video, good explanation

@learnandapply 4 года назад

Thank you so much for your valuable comments.

@Yes_Piano 3 года назад

Thanks for the explanations

@learnandapply 3 года назад

Your welcome and thank you so much for your valuable comments!

@karanmodi6533 5 лет назад

Awesome!

@learnandapply 5 лет назад

Thank you for your valuable comments...

@chetnavatsa6083 3 года назад

Very helpful video, do you have a previous video explaining "distinct categories"? I could not understand the impact and relation properly.

@learnandapply 3 года назад

Thank you so much for your valuable comments and appreciation! Yes, please see the 1st part video on MSA explaining all concepts in it.

@gabrielconnor5455 3 года назад

Thank you for your great video. What is relevant for deciding which method ANOVA vs. X bar & R in minitab to choose? Or is it all the same which method you choose! I can't go wrong?

@learnandapply 3 года назад

Thank you so much for your valuable comments! ANOVA method is more accurate than the Xbar-R method due to the additional element of Operator by part interaction.

@barstan54 Год назад

very nice thank you

@learnandapply Год назад

Thank you so much for your valuable comments. Please share your friends and colleagues.

@siu-yee 3 года назад

thank u

@learnandapply 3 года назад

Your welcome and thank you for your valuable comments!

@carlosarmelatrigo8110 2 года назад

Thnak you for the vidio. Which MSA should I use if the measuring in process? That means there are not 2 or 3 operators, just one mesuring device and 10 parts to be measure 2 or 3 times.

@learnandapply 2 года назад

Thank you for your valuable comments and appreciation 🙏☺ Still, you have to use the Gage R&R study crossed. Although the reproducibility part is not there, you are measuring 10 different parts. If there is only one part with one operator, then you can go for a Type-1 gage study.

@Cagandenizd Год назад

Thank you for the informations. I have a question, if we do not know the "upper spec-Lower spec" for these samples , (if there is no standards,or customer spects) How should we do? Do we calculate the tolerances and enter the these calculated tolerances ourselves?

@learnandapply Год назад

That's a practical question. In this situation, you can either use the tolerances specified by your internal team, design team, or product development team.

@ibragim_on Год назад

Thank you for the video. What is best Minitab or JMP (SAS)?

@learnandapply Год назад

As I am using Minitab only, I can comment about the Minitab. It is the best and most effective statistical software.

@talhajattak7737 Год назад

NICE

@learnandapply Год назад

Thank you so much for your valuable comments and appreciation 🙏☺️

@imaginebeyondlimits 4 года назад

Sir plz explain how to select samples for msa study. If Dimn is 10.0 +/- 0.02 can i take sample outside from this limit like 10.03 or 9.97 for study. Plz explain sir

@learnandapply 4 года назад

It is mentioned in the data consideration part of the video. Please go through it. Yes, you can.

@balasubramanianks9227 10 месяцев назад

Excellent video, Thank you for sharing. I have one question. Help me, to explain raw data to Minitab. How run data is converted to part data, I always have issues here.

@learnandapply 10 месяцев назад

Thank you so much for your valuable comments and appreciation! Can you please elaborate on your question?

@JohnDo3648-0 4 года назад

I understand that if P values for operators and for parts are 0 in this example we accept the null Hypothesis. Which means we need to evaluate ore Measurement System. Did understand correctly?

@learnandapply 4 года назад

If p values are less than the significance level (generally 0.05 for 95% confidence interval), we reject the null hypothesis. And we need to evaluate our measurement system.

@abhishekkamble9895 Год назад

Please share link for destructive test R&R by nested method

@learnandapply Год назад

You can get the video under the members section. Or if you want to learn in detail with data files, templates, and mentoring support, then please enroll in the MSA course. vijaysabale.co/msacourse

@scientist100 Год назад

If NDC is = 4 or greater, should that be ok too? Not sure why you jumped from 3 to 5 being acceptable.

@learnandapply Год назад

Higher the NDC, greater will be the capability of your measurement system to detect smaller differences. Yes, you can say 4 is good. NDC indicates the capability of your measurement system to divide the total observations into number of group based on their similarities. AIAG indicate it must be 5 or more, but depending on criticality of your measurements, you can select the most appropriate one.

@KhaznahKhalishahHidayat Год назад

I only have 3 sample size, can I get an accurate GR&R result using minitab???

@learnandapply Год назад

It's not meeting the data requirements. So, the results may not be reliable.

@shanmugavelayutham1394 3 года назад

Teach me about ANOVA.. I know u posted already.. need more method and different examples

@learnandapply 3 года назад

Ok. Do you want to join our training and certification courses? If yes, please contact us at info@learnandapply.org

@orangekitties44 2 года назад

Good video buddy!!!

@learnandapply 2 года назад

Thank you so much for your valuable comments and appreciation 🙏☺

@orangekitties44 2 года назад

@@learnandapply by the way, you're English is very good! As a Russian speaker I've understood you clearly without any confusion. Keep up the good videos!

@learnandapply 2 года назад

That's a great feedback and appreciation. Sure, thank you 🙏☺

@chialingtan8443 4 года назад

Hi Sir, Good Morning I have done the GR&R study at my tester ,but i always getting %Study Var value are more than 30% but The %tolerance is acceptable. Also NDC always getting 1 only may i know what is the actual causing i fail the study . Kindly advice..

@learnandapply 4 года назад

Thank you for your valuable comments. Good morning. As you are getting NDC as 1, you need to change the measuring device to more precise one. Currently, your measurement device is not able to separate the parts.

@chialingtan8443 4 года назад

do you mean the device value need to make sure precise one?

@learnandapply 4 года назад

Please change the measuring device with a other one having least count less than current one.

@Sian_Arul 2 года назад

Hello Sir, Part - 7 Video is not able to find.. Please share the Link to study

@learnandapply 2 года назад

Hi Arul, this is a member-only video. Please join the channel to see it. 20% of videos in the channel are member-only videos. Thank you.🙏

@azb0017 2 года назад

What is the difference between %Contribution and %study variation ??? Both are telling us the amount of variation that can attribute to the factors? is that correct ??

@learnandapply 2 года назад

Yes, but the contribution method talks about the % contribution of GRR in total variation, whereas in % Study variation 6*std dev to see the % of GRR in total variation.

@azb0017 2 года назад

@@learnandapply Why would we need to do this ?? 6*SD ...why are we doing that ? isn't % contribution good enough ??

@learnandapply 2 года назад

The purpose is different. The % contribution is used to assess the variation for each source of measurement error. Whereas, if you use the measurement system to evaluate process improvements, such as reducing part-to-part variation, %Study Var is a better estimate of measurement precision. If you want to evaluate the capability of the measurement system to evaluate parts compared to specification, %Tolerance is the appropriate metric.

@pharmaengineering Год назад

Gage R and R less than 10% acceptable, 10-30% requires caution, More than 30% unacceptable

@44444cesc Год назад

Where does Process tolerance =8 come from? I think you just copied the value that Minitab uses on their website. Can you please elaborate more on the process tolerance number used with an example? Thank you

@learnandapply Год назад

Hi Prashan, Thank you for your valuable comments. This process tolerance value is from the previous example that we have continued in this exercise. Yes, this example is from Minitab, so you can say that. The process tolerance value is the standard by which the capability of your process is determined. It is generally a 6*standard deviation in your process. Please reply to me if need further clarification.

@44444cesc Год назад

@@learnandapply : Yes I would like further clarification since your video does not explain that number and just copied what Minitab website had. I don't think you can calculate process tolerance using standard deviation. Process tolerance value comes from the drawing requirement as desired by the customer. Is the the specification range.

@learnandapply Год назад

I am not sure whether you read my earlier comment. It's from the previous example. If you calculate the standard deviation and multiply it by 6, you will get the process tolerance. Here, why 6 - because we are targeting Cp as 2. If you want to target Cp as 1.67, you can also consider process tolerance as a 5*standard deviation. You can also keep that blank if you have concerns about where it came from, or calculate process tolerance for the data using a formula. It's alright.

@44444cesc Год назад

@@learnandapply : What if there is no previous data and we are qualifying a new equipment?

@learnandapply Год назад

It's ok. You are collecting data for the MSA study, right? Please use that.

@theperchjerker 2 года назад

Vijay lol

@learnandapply 2 года назад

Thank you so much for your valuable comments, and support ☺🙏

@colvinodchengappa209 Год назад

PLEASE talk as if whoever is listening to you does not know ANYTHING ABOUT WHAT YOU ARE TALKING OPKJ? tHANK YOU

@learnandapply Год назад

I appreciate your viewpoint, but following the sequential process in learning is critical. If you are directly jump to last video, you are missing many concepts. For more detailed learning, please visit vijaysabale.co/msacourse