GS4 VFD PID Controller Tutorial: Part 1 of 4: Setup and System Test with AutomationDirect

Подписаться 55 тыс.

Просмотров 14 тыс.

50% 1

www.automation... - (VID-DR-0057)
- Learn how to setup and tune a PID controller loop in a GS4 Variable Frequency Drive (VFD). Part 1: Setup and System Test Part 2: Sensor signal filtering and Trial and Error tuning Part 3: System Linearization and Formula method for tuning Part 4: Loose ends - where we back up and cover things we glossed over in the previous three videos.
To learn more visit www.automation...
Check out all of our videos at www.Automation...
To subscribe: www.youtube.co...
Facebook: / automationdirect
Twitter: / automationdirec
LinkedIn: / automationdirect
**Prices were valid at the time the video was released and are subject to change.
Related AutomationDirect.com part numbers: GS4-21P0,GS4-22P0,GS4-23P0,GS4-25P0,GS4-27P5,GS4-2010,GS4-2015,GS4-2020,GS4-2025,GS4-2030,GS4-2040,GS4-2050,GS4-2060,GS4-2075,GS4-2100,GS4-41P0,GS4-42P0,GS4-43P0,GS4-45P0,GS4-47P5,GS4-4010,GS4-4015,GS4-4020,GS4-4025,GS4-4030,GS4-4040,GS4-4050,GS4-4060,GS4-4075,GS4-4100,GS4-4125,GS4-4150,GS4-4175,GS4-4200,GS4-4250,GS4-4300

Опубликовано:

8 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 14

@willardmusengeyi240 4 года назад

man you what you have just opened my mind there thank you a lot for your time

@automationdirect 4 года назад

Glad you found it helpful. Did you notice there are TWO series of PID videos for that drive? One is for Pressure Monitoring (the one you found) and the other is for tank filling with sleep mode. Go here to see all of our PID video tutorials: www.automationdirect.com/cookbook and then click on the PID icon. We have a bunch more like those coming out in the near future so be sure to subscribe to our RU-vid channel so you will be notified when they go live! Subscribe here: ru-vid.com

@tchampt 4 года назад

This video is very good.I learn a lot. Thank you

@automationdirect 4 года назад

Hi Teeraporn, Thanks for the feedback! Did you know there are over 1000 automation tutorial videos like it at www.AutomationDirect.com/videos and www.automationdirect.com/Cookbook? Check it out - it's a great resource!

@huseyindemir9134 3 года назад

This video series very good. Thanks

@automationdirect 3 года назад

Thanks! Did you know we have a lot of videos like it? (over 1200) Check them out here: www.automationdirect.com/videos .......................... by category & random search www.automationdirect.com/cookbook .................... by topic - there's an entire chapter dedicated to VFDs!

@yudipradiaz1698 3 года назад

Apakah kalau pakai mesin ini,mesin selalu hidup walaupun kran pada tertutup thankx you

@automationdirect 3 года назад

" Translation: "If you use this machine, the engine always runs even though the faucet is closed" Reply: PID will do whatever it has to to maintain the pressure. It is possible it can take the motor to 0 rpm, but only if you haven't set a min speed.

@dhrupadsaha4171 4 года назад

Very nice!!

@automationdirect 4 года назад

Thanks for the feedback! We have a lot more just like it at: www.automationdirect.com/videos for random access/search and at www.automationdirect.com/cookbook where it is organized by what you want to do (VFDs, PID, etc)

@dhrupadsaha4171 4 года назад

Thank you so much.. It will help me a lot

@lct9031 4 года назад

Hi there. Is it possible with PID control to connect the output of 1st vsd to the input of the 2nd vsd? I would like to control the speed of the 1st motor according to what the amps of the 2nd motor is. The higher the amps of the 2nd motor the lower the speed of the 1st motor

@automationdirect 4 года назад

Yes. Send the output current to an analog output (P4.50 = 3, for ex), then run that into the analog input of the other drive and tell that drive to use that as the frequency source (P4.00/01 = 2) for example. The GS4 is an extremely flexible drive, most of the time you are only limited by your imagination!

@lct9031 4 года назад

Thats awesome news. Thank you