Guaranteed Way to Get Bad Cuts With Silhouette Cameo 3 Autoblade and How to Fix It

Подписаться 180 тыс.

Просмотров 130 тыс.

50% 1

Silhouette CAMEO Not Cutting? Here's How to Fx Autoblade Issues | Silhouette School Blog 😍 Want to guarantee your Silhouette CAMEO doesn't cut? Make these mistakes...or don't!👇 SUPPLIES and MORE INFO and IMPORTANT LINKS!👇
You can find a FREE WRITTEN tutorial for how to FIX BAD Silhouette CUTShere on Silhouette School Blog 👉 www.silhouetteschoolblog.com/2...
🎥 Looking for more EDITED Silhouette videos from start to finish? 🎥 How about 1:1 Silhouette help? WE HAVE THAT TOO!! 👇
silhouetteu.com/pages/silhoue...
HEAT PRESS TUTORIALS 👇
• Heat Presses (Mug + Ha...
SILHOUETTE PRINT AND CUT 👇
• Silhouette Print and C...
SILHOUETTE SUBLIMATION TUTORIALS 👇
• Sublimation 101: Every...
BE (OR BECOME) A SILHOUETTE BOSS LADY! With my CUTTING A PROFIT Vidoes & BEST SELLING Silhouette eBook 👇
🎥Videos: • Cutting a Profit: Be a...
😘 Cutting a Profit: The Ultimate Silhouette Guide to Running a Successful Business: www.ultimatesilhouetteguide.c...
If you like Quick Craft Videos to get ideas and inspiration, CHECK OUT the 1 Minute Craft Inspiration Videos 👇
ru-vid.com/group/PLT... SAVE TIME Crafting! Let SO FONTSY do the DESIGNING for YOU ⏰
💰 LIMITED TIME DESIGN & FONT BUNDLES 👉 sofontsy.com/collections/craf...
✂SVGs 👉 sofontsy.com/collections/svgs
👉Download Free SVG Files: sofontsy.com/collections/free
😘Sign Up to Get SVG & Font Deal Alerts:
By Email: www.subscribepage.com/exclusi...
By Text: sofontsy.com/pages/sign-up-fo...
#silhouetteschool #freesilhouettevideos #freesilhouettetutorials #silhouettecameo4 #cameo4videos #craftvideos #howto #cricut #silhouettecameo #sublimation #heatpress #silhouettebusiness
🎥 Looking for more EDITED Silhouette videos from start to finish? 🎥 How about 1:1 Silhouette help? WE HAVE THAT TOO!! 👇
silhouetteu.com/pages/silhoue...
Prefer Written Silhouette tutorials with step by step directions for beginners on up? Check out the always free Silhouette School Blog where I share new daily content including Silhouette CAMEO tutorials, Silhouette Studio tips, and Silhouette project ideas! 💕 SilhouetteSchoolBlog.com
HEAT PRESS TUTORIALS 👇
• Heat Presses (Mug + Ha...

SILHOUETTE PRINT AND CUT 👇
• Silhouette Print and C...
SILHOUETTE SUBLIMATION TUTORIALS 👇
• Sublimation 101: Every...
BE (OR BECOME) A SILHOUETTE BOSS LADY! With my CUTTING A PROFIT Vidoes & BEST SELLING Silhouette eBook 👇
🎥 Videos: • Cutting a Profit: Be a...
😘 Cutting a Profit: The Ultimate Silhouette Guide to Running a Successful Business: www.ultimatesilhouetteguide.c...
If you like Quick Craft Videos to get ideas and inspiration, CHECK OUT the 1 Minute Craft Inspiration Videos 👇
ru-vid.com/group/PLT... SAVE TIME Crafting! Let SO FONTSY do the DESIGNING for YOU ⏰
💰 LIMITED TIME DESIGN & FONT BUNDLES 👉 sofontsy.com/collections/craf...
✂SVGs 👉 sofontsy.com/collections/svgs
👉Download Free SVG Files: sofontsy.com/collections/free
#silhouetteschool #freesilhouettevideos #freesilhouettetutorials #silhouettecameo4 #cameo4videos #craftvideos #howto #cricut #silhouettecameo #sublimation #heatpress #silhouettebusiness
🎥 SUBSCRIBE TO OUR RU-vid CHANNEL! It really helps us bring you more craft tutorials!! 👉 / @silhouetteschool

Опубликовано:

15 мар 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 247

@hondaffit 5 лет назад

I can't thank you enough! I was literally on the verge of tears lol. To think the fix was as simple as locking the friggen blade. Feeling a mix of emotions right now. Happy that I can finally start making decals, and pissed that I made such a simple mistake lol. Thank you thank you thank you again!

@morganpayne2414 4 года назад

OH GIRL, I WAS ABOUT TO GIVE IT UP ALREADY YOU JUST SAVED MY LIFE

@julieklauss8588 6 лет назад

Thank you, Thank you, Thank you, just when I thought I was gonna go crazy, yep I'm your typical newbie, must've winged it on the first go and then bam wouldn't cut properly. Thanks again great tutorial, I have my sanity back.

@teaquilts 5 лет назад

I know you keep hearing this, but THANK YOU, THANK YOU, THANK YOU!!!!! I've had my Cameo 3 for 2.5 years and have been having this problem, right out the start gate. My blade was sitting exactly like your first example. It looked "in" all the way to me! After 2 years of disappointment, I'm so very excited to use this cutter. I've been designing things that I had no knowledge of how to cut. I'm definitely having a yahoo moment because of you.

@Katie-mb9vw 5 лет назад

I never comment on anything, but I HAVE to say... you are a LIFESAVER. Thank you SO MUCH for this video. I have a Portrait and even though my gap was tiny, it was enough to destroy everything it touched. Thank you thank you thank you! I can't believe I didn't notice this myself!

@warmyellowshade 4 года назад

I was wondering why I kept having to readjust my cut settings all the time! It was driving me mental. You're a lifesaver, I had no idea. Thanks!! After reading through the comment section, I see you were right about us, typical starter problem. Hahaha. From the bottom of my sanity, Thank you!!

@kariacheson5042 4 года назад

I had a Cricut in my Amazon cart. Omg... you saved the day!! Who knew something so simple would fix everything!!!!

@bjtraders5300 5 лет назад

What a life saver you are. After trying several times and not being able to even cut thru copy paper I turned to you(I have been watching you since I ordered my Portrait 2) Yep, my blade was not seated all the way down! Thank you so much🙏🏻👍

@andreagarofolo9431 Год назад

What did u change to get it to cut through htv

@Jojomama1992 4 года назад

Thank you so much! I was so frustrated! Mine was not cutting deep enough. I tried a new blade, a new mat, deeper settings and finally updating my firmware is what did it. Thank you!

@soericanicole9697 6 лет назад

OMG, thank you so much!!! I just upgraded from the 2 to the 3 and I was ready to throw this thing away. You are the best. That fixed the problem it was not cutting my HTV vinyl at all. Now it cuts perfectly.

@rachelclark5657 5 лет назад

I just have to tell you that you are a godsend! You speak my language which makes taking something so technical and making it actually work doable!! Thanks!

@dorothycastro1182 6 лет назад

Omg we were going crazy.. Thank u so much 20 yards later we got it

@shardesadennis7042 5 лет назад

OMG!!!! Thank you SOOOOO much for this video! I was about to through the WHOLE Silhouette AWAY!!

@fungaijani 5 лет назад

Thank you so so much, I had no idea what the hell was going on with my cameo cutter, i was actually about to take it back to the manufacturer to get it checked. You are awesome, keep sharing these videos as it serious helps a lot of people...

@frompain2purpoze958 5 лет назад

Thank you sooooooo much for this video. I was about to have a fit with this silhouette cameo 3 cutting too deep. Your video is the first out of I don't know how many I have watched that actually did the trick. Thank you again for sharing your knowledge.

@Yuliana-wu1te 5 лет назад

YOU JUST SAVED MY LIFE WITH THIS VIDEO. THANK YOU!

@dianecabrera6801 5 лет назад

Yep...I was one of the 75% that you spoke about! Wasted a bit of paper but I'm so glad I found your video! I just fixed the blade.

@hayliecasey9914 3 года назад

Even though some of my cuts were fine and worked as expected, my BLADE WAS NOT IN THERE CORRECTLY!!!! THANK YOU!!! Looking forward to more consistent cuts!

@haaa5649 4 года назад

Hi, we are now in 2020 and I want to thank you from deep of my heart! I was struggling with my cameo4 until I found your video. Thank you so so so much! I can't believe I fix it.

@terriminzey9188 5 лет назад

Oh my goodness!! That was definitely what the problem was! I am so glad you posted this. Thank you!!!! I was having tantrums over here!! LOL!

@puls44 5 лет назад

I use these settings for autoblade and vinyl + cutting mat. (My machine is Cameo 3) Depth 2, Speed 1 (speed for vinyl should always be 1, specially when doing intricate designs), and Strength/Pressure 15. So 2, 1, 15. When trying different materials always start with lowest number and rise it by 1 until you get desired cut. Sometimes the pressure (last setting) is also important to do a good cut together with a low number on the autoblade. You'll get the feel of it once you test different thick materials and then you can calculate the settings by the thickness/previous experience. Cameo is an awesome machine I love it!

@dtrust68 5 лет назад

I have the same and am using the oracal 751c vinyl. I had to have force down to 2 as 15 cuts the backing. Also its brand new.

@rickreynolds7255 5 лет назад

Thanks

@_fishingwithblake 5 лет назад

u are the best person ive came across on utube explaining n fixing my problem love u keep vids coming

@foxyprice3114 3 года назад

Life saver. I just couldn’t understand why my cuts wasn’t coming out right. Thank You

@TheAnswerIsChocolate 3 года назад

You know that moment in Christmas Vacation where they figure out why the Christmas lights won't work?! I feel like that! THANK YOU !

@p.jacobs5588 3 года назад

LOL

@lailalae6934 3 года назад

You just saved my nerves.. I could literally cry❤️

@Priincess954 3 года назад

So helpful! I almost wasted 48” of vinyl lol. I’m glad I did a practice cut and watched this.

@GAMEFREAK505 5 лет назад

Great video, helped me set my blade first time after watching this!!! Thank you

@dramaa82 6 лет назад

Thanks! Just fixed my problem watching this video!

@kathytaylor6859 4 года назад

THANK YOU! THANK YOU! THANK YOU! Just what I needed to KNOW..maybe I will keep it now😆😆

@stuartbertles8721 4 года назад

Thank you very much. I understand it wayyy better now. Can't wait to get home from work to try this.

@ryanrobinson6145 5 лет назад

Thank you! You saved my project and my mind!!!

@partytime624 3 года назад

Youa re a genius! thanks i was losing my mind!

@bethbranning8322 4 года назад

This fixed my issue! I think of myself as a power user, but I still made this mistake. Thank you!!!

@MsLuv4Tennis Год назад

OMG! I had given up and stored my silhouette away. Thank you so much!

@cremrosmith 3 года назад

thank you for the great info! Just grabbed a Cameo 4 and this really helped out! Thanks! Keep it up.

@christinecovington4862 3 года назад

THANK U AFTER 2 DAYS I FINALLY GOT IT TO CUT ❤

@bethanyhoffman2825 4 года назад

Girl I am literally going to cry I have watched video after video and nothing was helping and I was so upset I watched ur video and you taught me so much I am so great full

@rachelcompton4625 5 лет назад

another thanks!! Cut thru cutting mat the first time lol ordered extras!

@carolinecordelia 4 года назад

Thank you so much for explaining this. My auto blade cut right through my mat. I have been using Silhouette machines for ten years and never seen this issue before. I figured it was my fault, but didn't know what it was. My auto blade was tightly put in though so I hope that it will adjust right now when I removed it and put it back in. If this doesn't help I just have to use my old cut blade with my old Cameo. Have to get a new mat too as it was sliced through the middle and I taped it with some duct tape from the back so it doesn't bend. I love my Cameo 3 anyway, cause it's pink :)

@g.5667 Год назад

Love your positivity

@SylvesterBoines 5 лет назад

You just saved me with this one. I thought I was going crazy./ Thanks a Million

@sophiehunt8194 5 лет назад

Thank you so much! I was going out of my mind!!!!!

@Groundrat 5 лет назад

Thank you very much for the video. Check my blade pushed down all the way and now it’s beautiful

@craftingwithpouidesigns Год назад

Thank you,because I was going crazy!! This video saved my projects.

@SilhouetteSchool Год назад

Glad I could help!

@heymimin 4 года назад

This completely solved my problem, I had a tiny gap when I put in the blade.

@crystalgil6890 5 лет назад

Great tips, it helped me solve my problems with kiss cutting!

@jessiegibson9023 5 лет назад

Good video Melissa and tip thanks

@raybarker7408 6 лет назад

You are brilliant! Thank you!!

@karenjenkins7460 5 лет назад

Was on my Silhouette Cameo 3 for hours i could not get it to cut all the way through, then it was cutting the vinyl into pieces. Then it quit cutting at all. I will try again in the morning. Thanks for sharing.

@emilyveronicam 5 лет назад

Wish I watched your video before I tried by my first cut. I did figure it out though.

@shannonpomp8081 5 лет назад

THANKS! again for helping me!

@dianaferner310 5 лет назад

I am amazed. I was having so many issues with this and you have just saved my life!

@kwesighansah8350 9 месяцев назад

You are a VINYL SAVER. Thank you very much!!!

@SilhouetteSchool 9 месяцев назад

Glad to help!

@chevonne757 5 лет назад

Thank you! I had the blade in, but, it stopped and I thought that was it..I pushed it down, and now it is cutting. :) LOL

@LifeAmpHealth 4 года назад

Thanks alot! Great video and explanation! 👍

@tinesbakingmad9177 5 лет назад

Great vid. I’m trying to cut rhinestone material but the blade makes all the noise then stays on 0. Also it cuts half on the design fine sometimes but then doesn’t cut the rest of design at all !!! Weird.

@cheekyberrlia6344 4 года назад

hi! i have a question. i put offset to my sticker and when i print and cut, the offset i made is not even. i mean the spacing from right side is bigger than the left side. do you know whats the problem?

@SharonJohnsonFitness 2 года назад

Thank you! Thank you! Thank you! You just saved my sanity!!

@SilhouetteSchool 2 года назад

Glad I could help!

@lisbethserina8693 6 лет назад

Hello there, thanks for this video; I think you should fallow up with how to change or fix the cutting strip. (I looked at your videos and didn't find anything to that extend) I had the issues you describe in this video, ended up IM with someone and they were very helpful, BUT, my mat is cut all the way thru and even the cutting strip has a long gap of about 3 millimeters deep. Now my blade gets stuck in that gap (Or at least thats what I think is happening) Thanks for your efforts to help! Liz

@Trinibarbie88 4 года назад

What do you do to prevent what happened to the second circle I can’t use the settings that is in my silhouette 4 for 651 vinyl it doesn’t cut it at all my setting are blade 2 force 20 speed 8

@jeniselett-stovall6067 5 лет назад

Yes yes yes. Thank you Thank you Thank you. I love you Melissa. I just purchased my Cameo 3 bundle and was ready to throw it out the window. Problem solved. 02/28/19. Smooches.

@kerrieh75 5 лет назад

I love your videos and Thank You for helping and sharing with us! I would love to know where you got your weeding tool!? Thank you!

@zulfikarwijaya-albatuni 5 лет назад

yeay, its work! thanks for your explanation :)

@danialm8122 4 года назад

Thank you beautiful..!!! you saved my day.

@Paytonscloset559 5 лет назад

Thank you for sharing! My cameo doesn’t cut deep enough on only 1 side of my design. The left side no matter the design. It’s so weird.

@sarahlucas3574 5 лет назад

Mine cuts too deeply on the top and right, none at all on the left and bottom.

@kriistiina111590 4 года назад

Thank you!!!!!! You are the best

@whitneymurray3369 4 года назад

What speed and stuff do you put it on for glossy vinyl?

@altinokz 3 года назад

I love my Silhouette!!

@loriboos1 5 лет назад

Great video! I love your weeding tool with the mickey head, can you tell me where you got it.

@anchiesangria8277 2 года назад

Thank you so much ❤

@lityaayu4085 2 года назад

it works.... thank you very much.... i was so happy my problem is fix... thank you very much

@KryaDiere 5 лет назад

Thank you omg... I just got a silhouette and that's exactly how my newbie ass put my blade in with the gap and it couldn't cut shit properly.

@franr7807 4 года назад

Thank you , thank you , thank you!

@wstxlatyna 3 года назад

Omg! I freaking love you its back to normal THANK YOU JESUS & Thank you mam....

@SilhouetteSchool 3 года назад

Yay!!!

@BarbeeDoll77 3 года назад

OMG!!! I was wondering why all of a sudden it started cutting all the way through my vinyl and my mat! I just paused this video and went to check and sure enough! There was a gap. I wonder if it got loose or something. THANK YOU!!!!!

@turnertiara 4 года назад

Thank you, thank you, thank you!!

@mireillelahaije4501 6 лет назад

I Like the weeding tool you use in this video, where can i get that?

@iceywavers8044 4 года назад

YOU MISS ARE A HERO!!

@BeTheChange1 6 лет назад

Man this Video came at the Right Time🤦🏾‍♂️

@40kwalker 5 лет назад

Tell me again what blade you used for the tiny stuff. And how can I get another one of those handy gadgets for taking the end of the auto blade off for cleaning. It is a white tool with 2 holes on it. After watching a video about cleaning my auto bIade I discovered I apparently got one with my cameo. I guess I misplaced it not knowing what it was for!

@kidzishop3300 3 года назад

thank you sooo much

@mirzafaisal19 5 лет назад

Thanks, mam u make my day...

@sontsizhao317 5 лет назад

U saved my day !!!!! Thkssssss

@mattholman8278 5 лет назад

Yep and I had to pull up while pushing the blade all the way down to get the gap to disappear. Thanks!

@654Bearcub 3 года назад

Hi I'm hoping you can help me please, I have a Cameo 3 and the left side of where the blade goes in is cracked. I was working on a couple small projects when it popped up. so I let the cameo finish the job it was cutting and removed the blade house and saw it, :( is this part replaceable and what is the proper name for it. or is there a video to show how to fix it, please I'm desperate, Thank you

@bryanstill3799 5 лет назад

What do you do when the blade is properly installed and when it goes to cut the blade slide up and dose not cut? You can pull the blade out even with the lever pushed in to lock the blade

@cutflower36 5 лет назад

trying to cut chip board with the ratchet blade on the silhouette 3, and its cutting out cuts the first pass fine but when the 2nd pass, its moves over and is cutting out side the registration box on the matte. so its not cutting in the same spot. can you help? or tell me how to re calibrate it?

@juicylee1015 4 года назад

Thank you so much! I was on the verge of launching it against a wall.....

@LeslieKailVillarreal 6 лет назад

Hi Melissa! I just got a cameo 3 and I used your tutorial to cut vinyl.. worked great. do you have a tutorial for cutting out a design on cardstock? I used the same steps form you vinyl vid except i chose cardstock. it made a big mass and the bead is dragging

@daisygirl0718 4 года назад

I load my vinyl in, when I press send it takes it all the way to the end and starts to cut.

@sandramigacz1766 4 года назад

Help, I have been trying to cut HTV for hours with no success. I have used the auto blade but cannot get the settings correct. It seems to just skim the surface and doesn’t cut. Have not had a problem with other vinyl. What settings should I be using on Cameo 4. I just received my machine for Christmas so my blade is new.

@victoriablau1003 5 лет назад

i just got my cameo 3, and i somehow got the beta version installed, and now my cameo won't load,does anyone have a solution for this? or is this not even the reason my machine won't load?

@donlevy4675 2 года назад

thank you

@torimilling1022 5 лет назад

Thank Jesus for your video!

@aldinsebastian4313 4 года назад

Thank you!!!

@FlipNCreate 4 года назад

I just got my cameo 4 and it is not cutting even the test run for 651 vinyl. Tho, I pick the right material and autoblade. I was able to use it yesterday for 641 vinyl . Need help