Guitar build - Sticker Bomb 

Hi! I didin’t use glue, but if stickers wont stay on otherwise I guess you can use glue

Hi, I think you can do it with clear coat too, but you will need couple layers, (and sanding between layers) with epoxy it’s just one cast, either way the problem is to get that coat stick well on top of stickers; make sure that the surface is clean from grease when casting epixy/clear coat. Maybe even using gloves when adding stickers, because your fingers may contain some grease/dirt. Or you could just put stickers on top of a clear coat and thats it😃

You can clean the surface with silicone remover, but test that chemical on separate stickers before, so you know it doesn’t ruin those stickers you are using.

@@SuperGuitarProject Thank you very much for the detailed response🙏

Hi! Thank you for your interest! Im sorry but this one is not for sale. In any case If you are serious I could build you something similiar in future.

Kiitos! Tässä meni n.5 viikkoa

Uniikki! 😎

Paljonko muuten kitaran valmistaminen maksaa, jos sen duunaa kotimaisista puista?

@@samileino6615 hmm, jos rakennat yhden kitaran puhutaan muutamista kympeistä perus puiden osalta, rakensit sitten ulkomaisesta tai kotimaisesta. riippuu erittäin paljon myös mistä/keneltä ostat, esimerkiksi lankku loimukoivua sahalta voisi maksaa 80€ ja valmiiksi sahattu yksi loimukoivu bookmatch kansi facebookista 100€. 80€ lankusta sahaat niitä itse vähän lankun laadusta ja omista sahaustaidoista riippuen vaikka 8xkantta ja otelautoja

@@SuperGuitarProject Jos noin halvalla pääsee, niin rakennatko minulle kepin? 😁 Voin toki ylimääräistä maksaa.

Hi, It’s star shaped mayby closest to Dean ml shape

Where did you get your star template from? Been looking for one

@@MrNickRowehi! I just noticed this comment😃 I made templates my self✌️ I drew it with vector app then printed it with A4 size printer, glued those papers on top of mdf piece and made the template based on directive lines.

I forgot! First I made master template from 4mm thick veneer, I glued those papers on that. ~4mm veneer is easier and faster to work with, and when the master template was ready I copied it to actual template (thicker mdf piece) with router.