GUN GRIPES

Подписаться 2,7 млн

Просмотров 1,4 млн

50% 1

GUN GRIPES NOW IN PODCAST FORM! iraqveteran8888...
AMAZON Store: amzn.to/2H7Lq6Y
PATREON: / iv8888
JOIN USCCA LEGAL SELF DEFENSE NETWORK: usccapartners.c...
CHECK OUT OUR MUSIC CHANNEL: / guitarsenal
There are a ton of examples out there of firearms that aren't made like they used to be in quality or appearance, many more that we were able to show here. Many of the large companies have been cutting costs more and more and sometimes it goes a little too far. The main point of this video is just to be aware of firearms you are looking to purchase and be sure they are of good quality before walking out the door with it.
CHECK OUT OUR WEBSITE!
www.iraqveteran...
Shirts & other Apparel:
www.ballistici...
FACEBOOK: / iraqveteran8888
Follow Us On Instagram:
/ iraqveteran8888_official
/ mrsiraqveteran8888
/ chad_iv8888
AMAZON NOTICE: As an Amazon Associate, Iraqveteran8888 earns from qualifying purchases.
Copyright 2016, 88 Industries, LLC
DISCLAIMER: Our videos are strictly for documentary, educational, and entertainment purposes only. All shooting is performed on state-approved firing ranges under the supervision of trained professionals. Imitation or the use of any acts depicted in these videos is solely AT YOUR OWN RISK. All work on firearms should be carried out by a licensed individual and all state and federal rules apply to such. We (including RU-vid) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any of our videos. We do not endorse any specific product and this video is not an attempt to sell you a good or service. We are not a gun store and DO NOT sell or deal in firearms. Such a practice is heavily regulated and subject to applicable laws. We DO NOT sell parts, magazines, or firearms. We are not instructing our viewers on how to modify firearms, accessories or otherwise to change their basic legal function. These videos are free to watch and if anyone attempts to charge for this video notify us immediately. By viewing or flagging this video you are acknowledging the above.
Fair Use: In the rare instance we include someone else’s footage it is covered in Fair Use for Documentary and Educational purposes with the intention of driving commentary and allowing freedom of speech.

Опубликовано:

12 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 2,6 тыс.

@jerdog333 8 лет назад

Don't ever apologize for making a video too long. You guys are great! I was a leftist anti gun guy before I found your videos years ago (I was just looking for a gun for my bug out bag and came across one of your "5 Guns" videos). Watching your videos educated me, and now I'm a 2ND Amendment advocate, full on gun guy only because of your ability to articulate gun issues that anybody can understand, without alienating people who don't know any better. In short, thank you for all that you do, and keep on doing it! Your pal, jerdog3

@loganheaton9213 8 лет назад

This is pretty great.

@Drillz007 7 лет назад

its not impossible to be left and pro guns guns and equality go hand in hand

@sambrock9277 6 лет назад

It's true, I'm pretty much a Democrat, who also loves guns! We can all live in harmony! You just have to let go of ignorance.

@boomerisadog3899 5 лет назад

@@sambrock9277 I'm about as far from a Democrat as you can get even though I used to be one. However, I fully support everyone's right to self-determination. I don't care if you're gay, straight, or anything in between. As long as you don't try to infringe on my rights, we're cool.

@OmarGonzalez-gx1ks 5 лет назад

jerdog3 Bravo!!!👍👍👍

@ShawnD1027 8 лет назад

While I agree that most firearms were of higher quality in years past, there's also the problem of survivorship bias. The guns that you think are great might simply be the best of the batch, with the crummier ones being long since trashed. Kinda like how many folks think old houses are far better, but they're thinking of the high-end old houses that were built with quality -- the majority of old or low-end houses are long gone, so you don't see how bad they were.

@27dcx 8 лет назад

+ShawnD1027 You know, that is an extremely valid point.

@damiangrouse4564 7 лет назад

27dcx It certainly is! All the old Toyota, VW, 50s fords and Chevys etc. fall in that category.

@donskiver 5 лет назад

@Tanner Clark Yeah exactly. Considering how these guys are glock fanboys, that point is made even more valid.

@stillenacht8518 5 лет назад

Tanner Clark I would agree except the polymer glock uses is better quality than the polymer Ruger uses. And the polymer Cz and Sig and HK uses is better than both. Glocks also have always been made with polymer, but taking a nice wood-stocked gun and putting an injection molded cheap polymer stock on it definitely constitutes a downgrade.

@graeme3023 5 лет назад

That'd a good point... Its the same with cars... The crap ones are scrapped amd only the good examples survive ..

@jimvandemoter6961 6 лет назад

When I look around me and I see how some of us act, I realize they don't even make people like they used to.

@johnboy3089 7 лет назад

Please keep CZ on the down low so they don't raise their prices

@borisbuliak3626 6 лет назад

Why are they dropping models like the 550 American, 550 FS aka Mannlicher?

@mickeydee3595 6 лет назад

They are amazing hey!!!

@jamesavery6671 5 лет назад

hahaha I think your doing more damage than he is as this is the first comment

@lysergicaciddiethylamide6127 5 лет назад

🤫

@AudibleVisibIe 4 года назад

Cz hasnt been on the "down low" in years

@user-rk4zm3nb5f Год назад

My pre-64 Winchester model 70 was made in 1949, it is two years older than I am. Fit & finish is incredible.

@andreawhalen4142 Год назад

Yeah those are still good till this day.

@JM-lk6wo Год назад

I have a 1903 Springfield rifle, made in 1918 that is a wonder to shoot. Someone, prior to me, did a fantastic job of sporterizing it, beautiful maple stock, Lyman or Redfield peep sights and a great (Krieger?) barrel. I originally intended to put a scope on it, but it is so much fun to shoot with the iron sights, I changed my mind. I will be keeping and enjoying this rifle for many years to come.

@burningsporkdeath Год назад

I have a Pre-64 Mod.70 target made in the early 50s, a pre-war Mod. 71 and a pre-war Mod. 70 hunting rifle, even between those you can see a huge difference. I really think the 1920s and 1930s were the peak in quality. The big surprise is my FN Patrol Model 70 that was made around 2008, it is right up there with the 50's target as far as the machining.

@blood_rayven3253 8 месяцев назад

I bought my dad a 1947 for Father’s Day back in 2002, for a price you wouldn’t believe if I told you

@Trollygag 8 лет назад

Old guns were definitely hit or miss too... you just only remember the quality ones.

@zwordsman 8 лет назад

+Lollygag Well really only the quality ones survived this long.

@Nosleep8558 7 лет назад

Trollygag Just like music

@Nostrildomus 7 лет назад

Even when Marlin had an attack of bean counters shot well enough to keep many in my vault to this day . Thanks be

@seanhazelwood3311 6 лет назад

Tanner Clark It's the chemical makeup of the polymer, and the component that it's used for. Glocks are durable, except for the polymer guide rod (which should be steel). Mossberg 500s are durable, except for the polymer trigger group (which should be at least a quality metal). Some things can get away with being lighter, weaker materials and some can not.

@tangero3462 6 лет назад

It's just like how polymer mags sucked until Magpul really came onto the scene, and even then, they've revised their polymer two or three times to make it even better. All plastics are not created equal.

@hutehund9519 6 лет назад

Best ever “Gun Gripes.” Thank you. Finally found the “right” 1964 Marlin 336RC in 35 Remington a few weeks ago. Give me a choice between that rifle and a new 336 for the same price and I’ll choose the 1964 version, every time. In fact, I’d pay substantially more for the old one. There’s just no comparison.

@karigreyd2808 8 лет назад

Keeping costs down is no excuse for bad workmanship.

@UrielX1212 8 лет назад

+Krevin Grard 100 percent agreed.

@johnmood5653 5 лет назад

I have to agree wholeheartedly too. I have recently acquired a Springfield Armory XD 9mm Subcompact. American company, built in Croatia. I looked it over carefully before getting it. It had a drastically different quality of workmanship to the weapon that it replaced. The former was a Rock Island Government model. In the example I'll share the feed ramp on the Rock machining marks could be seen without a magnifier. Several brands of JHP ammo would not feed. One round struck the feed ramp and shoved the projectile completely inside the cartridge. In the newer weapon, the feed ramp Is absolutely as polished as a mirror. The assembly was clean, I could see no scratches, good workmanship all around. The materials appeared to be well selected, the rifling in the barrel with no wear appeared as clean as any barrel I've ever examined. The XD was made and was new old stock, no signs of wear, and was more than acceptable, it was top flight workmanship - from Croatia. If I see this kind if workmanship In an American weapon, it's a Kimber, a Smith & Wesson, or a Colt. All brands known for high quality and good workmanship. So examine carefully when buying. You might get a quality weapon not capable of loading anything but military FMJ, NOT recommended for police or self-defense (read the box, it's on there on Winchester White Box 230 grain GI issue style ammo). Check out quality of the gun if DEFENSE OF YOUR LIFE IS AT STAKE. You test drive cars, rent what you're interested in, ask a few local cops what their force uses and what they like to use off duty for concealment. You'll get a few surprises, but you'll be safer when you have a weapon you'll be happier and more confident if it comes down to defending yourself, your family, or an innocent third party being attacked by lethal threat.

@allenlarabie8854 5 лет назад

Exactly

@gregoryadkins2213 4 года назад

John Mood I know a few people who will not buy any firearm,built and assembled in the USA by an American Worker.

@thatguy22441 4 года назад

Given the amount of competition out there, bad workmanship is very costly to a company anymore.

@Critt75ih 5 лет назад

I appreciate that you gentlemen are not “gun nuts” but firearm historians and true enthusiasts. Well done. My “Deer Gun” is grandpas Remington 570 Game Master in .35 Remington.

@1122ss 4 года назад

there is no remington 570

@jeffscuderi8662 4 года назад

760

@thevoidbeckons 5 лет назад

"More deer have been killed with a Marlin 336 in .30-30 than probably any other gun." _Winchester model 94 wants to know your location_

@nootnoot4373 5 лет назад

J Jimenez my thoughts exactly lol

@BobbersDown 5 лет назад

Haha yes indeed.

@JW...-oj5iw 5 лет назад

my2cents ... The Barkleys in the big valley used Marlin lever guns.

@JW...-oj5iw 5 лет назад

my2cents ... Well, if John Wayne and Chuck Connors (o, not e) would come up against the Barkleys, the outcome would be friendship, because they were all the good guys. As they compared their lever guns, they'd all appreciate each one for its qualities. Then they'd go out hunting and when a deer came into view at about 150 yards, they'd open fire. After a short fusillade, the deer would run off unscathed and the group would wonder how they could have missed. The Hollywood armorer would explain to them that they were firing blanks in the pistol caliber carbines, not model 1894 Winchesters. Chuck would ask him how it was possible that his twelve shooter could be firing blanks, especially since he killed his opponents in almost every episode. Marion would say that he's shot and killed plenty of men and injuns with both rifle and hogleg, so that deer should have gone down. Didn't anyone tell it to drop? Meanwhile, the non-gay actors would be gang banging Audra (Barkley, not Lindley), because she was hot as hell. They'd say that was better than trying to kill an innocent animal, which the gay actors would agree with. The deer wrangler would be rolling with laughter that the actors were dumb enough to think they were hunting. Director: CUT!!

@DeezCheez69 4 года назад

Bubbad nagants wants to know your location

@Captain-Electro 8 лет назад

Anyone that wonders about bad workmanship, doesn't know about getting underpaid by an employer who tells you to keep working even though you are finding and pointing out defects but management won't let you stop and fix the fucking machine even though the product is fucked up. I've worked in a few factories, and it sucks to work for a boss who doesn't care about quality until sales go down. So by all means stop buying, either they will fix the machines or go out of business. There are lazy workers as well but in general folks show up expecting to make a quality product and then get blown off by management about the defects. Even if they know someone who is a fuck up, it is hard to get them fired because they are either under staffed or the guy fucking up hides behind the Union.

@stopthephilosophicalzombie9017 8 лет назад

+Electro You said a mouthful. You just described the plight of the modern worker almost universally. Sadly, the blame can't be isolated easily, there's the effects of globalization and macroeconomic forces, trade agreements, mismanagement, nepotism, etc., etc. I guess all one can do is hope they are lucky enough to work for an outfit in its prime.

@salame462 8 лет назад

+Electro I work for a very large polymer/plastics manufacturer as a production operator and 80 percent of our lab techs in quality control are lazy pieces of shit that pass defected material all the time and write down bullshit numbers when recording their results. We are all paid very well too. I think it comes down to pure laziness by a few bad apples that continue to keep their jobs due to being understaffed. Not the same as machining or machined parts but still the same kind of thing...

@stopthephilosophicalzombie9017 8 лет назад

salame462 That speaks to poor management and policy. There should be checks and incentives in place to keep that kind of shit from happening. If you come up with that plan, you might get yourself a promotion.

@Iraqveteran8888 8 лет назад

+Electro interesting...😇

@justinreed9029 7 лет назад

Electro I'm an American Automotive Factory worker (non union) we have the same problems. It's 98% management. They don't let us stop to fix problems because that means lower numbers. And at the end of the day that's what they care about.

@larryclark9380 4 года назад

My favorite example of C & R craftsmanship is the K31 Swiss. The straight pull bolt is quite a complex design and mine functions smooth as silk. Every detail including the wax sealed match quality military ammunition amazes me. My eighty year old gun easily holds 5-shot one inch groups at 100 yards.

@kirkmooneyham Год назад

Six years on, I'd say if you want a modern firearm that is made to high standards, Henry is the way to go. They aren't cheap, but they are well-made.

@erroneous6947 Год назад

Made in America too.

@thealarmclock9307 Год назад

That's a fact

@connorlefler6238 Год назад

Their receivers are made of sink/aluminum metal now, not steel

@tclott316 Год назад

@@connorlefler6238that’s bullshit lmao. Whoever started that rumor is a genius because all the goofballs ate that shit up like it’s the holy scripture. No they’re not.

@ShaeferGriffin Год назад

I'm on my second. I love it more than I could love a human baby.

@WildBill1122 5 лет назад

In my opinion on nearly all production items not only are they made cheaper but there is a profound lake of quality control and pride in work.

@nicerperson1 6 лет назад

You guys are great, you just jaw away like you are sat down with friends, no bullshit, no macho man, tell it like it is. A very useful video to keep when looking to buy. My wife and I went to our first (UK) gunshow over 3 years ago and my wife picked up a brand new Chiappa lever action, then she picked up an old Winchester - her face said it all. The new Chiappa felt like it hadn't been finished yet, the Winchester felt like your favourite pair of gloves, it seemed to melt into your hands like it was made for you. I''m sure Chiappa make good stuff, but that gun was rough. Keep it up, I could listen to you guys all day.

@rr01xz 8 лет назад

SOMETHING FROM AUS. LOOK INTO THIS ... A man had his house broken into on the 26 of March this year in Newcastle NSW .He found the criminal in his daughters room this is at 3.30 am.He proceeded to make a citizen arrest as the fight broke out the criminal had his neck broken .he died later that day .......THE HOME OWNER HAS BEEN CHARGED WITH MURDER...YOU THINK YOUR COUNTRY IS IN TROUBLE. In my country you cannot even defend you family.

@RezToRealLife 8 лет назад

+rr01xz - I love Aus. but that is indeed messed up. Someone enters your house with intent to harm... Self-defense and defending our families is a fundamental right.

@beau4687 7 лет назад

rr01xz I'm an Aussie too and this story made my blood boil. You forgot to mention that the intruder beat the crap out of him before he overpowered him and the only photos the news could find of him was with a crack pipe or a bong in his hand. And his family are out the front of the courthouse trying to defend his actions and want the man jailed for life for defending not just his home but his little daughter. I'd have no issue putting a hole in someone just for being in my house let alone a kids room and he attacks me.

@Nostrildomus 7 лет назад

Welcome to our world , get a Rottweiler and blame him . Thanks be

@evangeloscopsidas9752 6 лет назад

Hey don't think you Aussies,have it bad. InGreece 2 intruders attacked a teenager in his home .he had a German shepard which rose to the occasion and ripped the bastards throat out . After the boy fought back. the second intruder fell down the stairs, sustaining fractures and extended injuries. Result.....10 years imprissonment for manslaughter, and who knows what for grave bodily harm.!!!!! iF THAT IS JUSTICE FUCK THE EU AND ITS COMMIE PSEUDO DEMOCRACY.

@breakermorant2428 6 лет назад

That is why one should invest in a 5 horsepower meat grinder, a sausage stuffing machine and know where the local hog and pig farms are..... unless you have an over abundance of homeless.

@andreawhalen4142 Год назад

CZ across the board are the closest to how things where made years ago i have found. Some savage rifles are still high quality metal parts but i have never seen a bigger decline in quality than remington, i litterally avoid their guns now, and it's sad to me.

@bobzelley5100 Год назад

The 455 is good. Everything works well. The American with scope and the premium for shooting iron sight at 50 meters is perfect .

@erroneous6947 Год назад

I agree. Cz and savage are solid for the most part. I hear good things about tikka and howa rifles too.

@Judge_Dredd Год назад

Well I'm not so impressed with my 783, I think I'll end up buying a Tikka T3x Super Varmint/Varmint instead, I have a Savage Mk2 and 97R17, they are ok but a bit cheap on parts, I may end up looking at CZ 512 for Mini Rifle and a Tikka T1 in .22lr AND .17HMR for Running Boar Competition, Vermin, and Fox/Vermin. I have an old Anschutz 1413, for Target, which I'd only change for a 1913 if the bolt extractor fails, since the 1413 is 1963 manufacture, and they since moved on to double extractor bolts. Best gun here by far is my 6.5x55SE Tikka T3x Super Varmint, it's got a smoother action than the T3x TAC A1, but the furniture on the TAC A1 is better for target. Mine's currently in .308, but I think I'll try 6.5 Creedmoor in TAC A1, and exchange the .308 for yet another Super Varmint, these rifles are just so good. So CZ, Tikka, and Anschutz, can't see me buying anything else, and Remington has been a disappointment.

@Prairie7777 Год назад

@@Judge_Dredd I have a CZ512 .22 mag that shoots a ragged hole at 75 yards. Also a CZ 452 in 17 HMR that shoots the came hole at 75 yards. LOVE CZ's!!!

@t.c.mcqueen2350 8 лет назад

Excellent show Eric and Chad. I love my Browning 22 semi rifle that my dad bought in the 70's with the feed tube up the stock that you feed in the 22 LR's in the side of the stock. a small action but a very dependable rifle.

@aw9389 4 года назад

When you mentioned people treat your gun gripes like pod casts, im driving through Florida listening to your vids. They are relaxing because you guys seem relatable and have good info.

@robm6510 4 года назад

Same. I'm in FL and listen to them on my commute everyday.

@erichonomichl7869 Год назад

i used to work at a big box outdoors store in the gun department. When Remington started making the 336 with the parkerized finish the rear sights on everyone was off. There also is a big difference between the new 870's and the older Remington Expresses.

@metallicsilver 8 лет назад

All of my Rugers are pinpoint and reliable. I don't stare at the script on the barrel, I focus on the front sight. Maybe in the future I can buy some expensive guns for show. But for now its function over form.

@kiul24 8 лет назад

IV8888 Drinking Game: take a drink every time Chad says "whatnot". All jokes aside love yalls videos.

@cdavidlake2 7 лет назад

Kyle Soucy Think not - alcohol poisoning. ;)

@Unit38 8 лет назад

I'll be 55 this year. A Hell of a lot of guys my age have fond memories of 10-22s, VW Beetles and Mustangs. We learned how to shoot with a 10-22 and how to drive on an old Beetle or Mustang.

@jeffscuderi8662 4 года назад

Beetles not that great

@patrickgriffitt6551 2 года назад

@@jeffscuderi8662 had a 67 and a 70 loved them both. 67 would top 90mph across Kansas.

@moefitzgerald4439 5 лет назад

I bout the CZ 527 carbine a couple of years ago. Put about 2000 rounds threw it at the range and take it hunting in the fall without one issue! I love that little gun! Its incredibly light too, pacts a decent punch for medium game without killing your arms holding it all day!

@Toolness1 7 лет назад

I think Chad is a valuable member of the team and has a lot of knowledge. I liked Barry too, RIP. But, that's over and done with and he can't be replaced. Go eat some 'member berries if you can't handle it. I've never for a second gotten a "know-it'all" vibe from him. He is very knowledgeable and likes to share his knowledge with others. That's the point of the channel, is it not? He's also very patient and a hell of a shot. I went from owning a Model 10 that I never shot to having a C&R license, learning a great deal of gunsmithing, and reloading over 25 different calibers largely because of this channel. I don't get the hate... Then again, I don't get the hate for Nutnfancy either. I guess I'm simply not a miserable person who likes to hate on people because they don't fit my expectations. If you don't like Chad, don't watch the videos he is in. A huge part of the downfall we have seen in the last decade is everyone is selfish as hell and thinks their opinion and feelings are unique and special like a dazzling snowflake.

@teran9 7 лет назад

He's an effin "What not".

@matthill8764 7 лет назад

toolness1. well said

@cwatson42785 5 лет назад

I hated Not Barry at first because he was just that...Not Barry but I've come to really like Chad. He seems like a knowledgeable, good guy. Plus it's not his fault that Barry is no longer there.

@detinator5 5 лет назад

Nutnfancy is ok he just doesn't edit his videos and rambles for literally an hour.

@jamesavery6671 5 лет назад

These two yuppies cant hold a candle to the old man. Bunch of pussies millennials like yourself

@OrElseUWillDie 8 лет назад

I'm surprised they didn't mention Remington.

@pastorclay82 8 лет назад

maybe they don't want to admit they own a Remington.

@Iraqveteran8888 8 лет назад

+everett higginbotham maybe I don't own a Remington....🤔

@pastorclay82 8 лет назад

+Iraqveteran8888 and yet you'll admit to owning a high point.

@Iraqveteran8888 8 лет назад

+everett higginbotham I've got a couple of Remington 870s that are okay guns. Yes I own two hi points. A pistol and a carbine in 10mm 🦄

@pastorclay82 8 лет назад

You have my attention, how do you get one in 10mm?

@alexhidell8074 8 лет назад

It is hard to go wrong with anything manufactured in Switzerland--guns, watches, cameras and other optics, even knives.

@LBoss222 8 лет назад

+alex hidell you are right, years ago I bought a K-31 on the advice of a gun guy I trusted (I knew nothing about them at the time) it's an awesome gun, I don't shoot it much, but I will never trade it.

@robsorgdrager8477 5 лет назад

You've never worked on a Volvo I'm guessing🤨😕

@sandervanduren2779 5 лет назад

Rob Sorgdrager Volvo’s are Swedish not Swiss

@robsorgdrager8477 5 лет назад

@@sandervanduren2779 explain me the difference and don't tell me mountains....that's like saying people from the Ozarks are not Americans .....the Swiss are just wealthy sweads or poor Germans . Volvo's are engineered by the same people that built tractors Sept they added rocket science. Swiss to me just means 100 more steps to do a job that requires 5 steps. The Swiss can't just build a clock they have to invent a new way to measure time and then work their way back to a clock. 😁

@sandervanduren2779 5 лет назад

Rob Sorgdrager well for one, the Swedes live in a completely different country, have a different language, a different culture, and so on. They are not even remotely similar, other than being Europeans of Germanic descent.

@PeterHinkle 8 лет назад

great video. I don't know why you apologize for making long vids. We love your longer vids cause the content is good. You aren't just rambling on and on like some vids. Keep em coming!

@7.3obsobsessed31 6 лет назад

I have a 1971 marlin model 336 chambered in 35 Remington it has been passed down in my family since 1971 I got it when I was 10 that gun is the only gun I would trust with my life with

@rtdc6730 5 лет назад

I drive over an hour to work and only listen to you tube gun vids. I have learned so much about shooting and reloading thanks to people like you guys. Btw MORE RELOADING VIDEOS!!!

@kimfaircloth 8 лет назад

Eric and Chad, great video! No complaints here about it being too long. My experience is in line with yours, Ruger and CZ bolt guns are great! Paid more for the Rugers than I wanted to but they are worth it in my opinion. The CZ's are slick and accurate, will not hesitate to buy again. Then we get to Remington and Savage, got a Remington 700 in 22-250 with bad chamber from the factory. Splitting cases because the headspace was way off, barrel ruined. Although, took the action and built a tack driver, Shilen barrel, and much custom work, best 5rd group at 0.36 inches at 100yds, still 22-250. Savage model 10 in 308, best group from factory about 2.5 - 3 inches. Bore looked like the rifling cutter chattered all the way down the bore. Threw away the factory junk and now getting 0.5 inch 5rd groups at 100yds with Shilen barrel. Wrote factory about poor work and they don't care, won't even respond. I will not ever buy another Remington or Savage rifle new in the box again. Will look for old rifles that companies were proud to produce not the junk they turn out now. Great video, keep up the good work!!!

@rugerrocker7483 5 лет назад

I have a Ruger Talo GP100 SS .357 6" it's just beautiful. Built like a tank.

@brian6265 5 лет назад

My oldest firearm is a Remington Model 11 made in 1931. Still serves nearly flawlessly

@ricksorber8343 4 года назад

I had a Winchester Model 12 from 1926. My grandfather got it when he was 16. When things got rough, I took it to Cabela’s to see what I could get for it and they didn’t even want it. It’s a 16 ga. chambered for the old 2-1/2 or 2-9/16 inch shells. They figured nobody would want it. A cousin bought it and gave it to his great nephew for Christmas, so it’s still in the family.

@Drgunzo616 Год назад

@@ricksorber8343 I picked up a Model 12 made in 1941 maybe seven years ago. It had an old leather shell holder on it that had discolored the stock a bit. 16 gauge with a poly choke. Nice checkering. I use it for turkey or squirrel with light loads.

@taberzak7587 7 лет назад

I had a post-freedom group 1895SBL in 45-70, and the machining was brutal. The feed ramp was so sharp that it would cut into the brass of the shell and jam it there. On the other hand, I bought a Winchester 1873 with a 20" bbl in .357 mag, I believe they're made in Japan...amazing quality gun, great shooter, beautiful fit and finish.

@hatchetjack1031 2 года назад

I have a 100 year old Marlin model 39, a 40 year old 39 ,take down and an 1894. These Missouri walnut rifles are beautiful

@JungleEddie 7 лет назад

Just my 2 cents, older guns seem better because all the crappy ones were destroyed years ago. Also, if you buy a new gun and something goes wrong you tend to be more annoyed and vocal because of the increased cost you are out.

@TylerHulan 7 лет назад

JungleEddie there are still pretty of crappy guns from back in the day that are real pieces of shit

@531greyghost 8 лет назад

Older guns tend to be nicer because they are here. Abad gun made in the past would not even be here today.

@elliottg4984 8 лет назад

Funny, you can get a deer gun today, Savage, Howa or Tikka, that costs only a couple day's wages, whereas in years gone by a less accurate winchester 70 was out of reach of the common man. If you look at companies like Montana Rifles, Cooper, Sauer... I think they really do build them like they used to, selling rifles you could hand down. Different strokes.

@BobbersDown 5 лет назад

I own a Tikka T3x and while not exactly cheap, it is an extremely accurate and well made rifle. And the trigger in that thing is top tier.

@jeffscuderi8662 4 года назад

Howa is good Mossberg patriot decent

@lloydsims1573 2 года назад

I have a Howa 1500 in 243 Win. with the Hogue fully overmolded 'sticky' stock. Being used to wood finish or molded polymer stocks, the Hogue felt odd, but learned that the purpose was to weather proof the stock, and now it feels great. BTW, it shoots .75 groups at 100 yds. all day. Love it.

@TheDoctorbob12 7 месяцев назад

If you hand loaded ammo it would shot 3/8 in groups. The Howa are great guns for the money.

@mrsamzero1 7 лет назад

I just turned 67, vietnam vet, been buying, selling, horse trading all my adult life, mostly made good deals, got burned on a less than a handful. I let some really rare ones get away in my youth. lol You have a lot of common sense, it's becoming rare. Love your videos.

@punclalig1036 8 лет назад

i have no idea about guns, but was nice to watch this anyway.

@alanmunilla7196 8 лет назад

i've fired guns a couple of times, i don't own one myself but it's always good to learn something about this kind of stuff since i plan to buy guns one day

@TWDxKILL3R 8 лет назад

You don't live in Texas, do you?

@slamdunktiger 8 лет назад

+Puncl ALIG Wow, nice, how'd you find this channel?

@punclalig1036 8 лет назад

slamdunktiger accident, first i found "hickok45" and then i found this ;D

@slamdunktiger 8 лет назад

+Puncl ALIG very cool, have you shot anything before?

@kaziulaz 7 лет назад

You guys have a too good channel for me to watch it. In my Poland, i can not possess weapons due to various difficulties(theoretical i can). Watching your movies is like my cruelty to himself. I have here my house, work, money, but this is not it. Your right of possession of arms is the first reason to become an immigrant. : D You make fantastic job !! I had to make break in the middle of the movie because my heart ached too much and i need write it .

@derekh3577 6 лет назад

I love most of my older guns from late 60's to early 70's like: Browning High Power 9mm Colt Python 6" blued S&W Highway Patrolman 38 special Colt 45 Government Browning 270 BAR rifle semi auto Enfield 303 from 1912 Ruger 10/22 from 1971 Winchester 320 / 22 cal 10 shot clip from 1968 best little iron sight rifle as it was my first Ruger Blackhawk 357 / 50th annivesary edition just to name a few

@stradostrado 2 года назад

My first 22 was a 10-22 Ruger 1971. I bought it for $42 in Sacramento CA. Best and most accurate Rifle I own. I use my Stainless Steel 10-22 Ruger all the time now that I bought 10 years ago. I thinking about buying a CZ 512 Semi Auto in 22 Mag to step it up a bit.

@HeavyJ318 4 года назад

I don't k ow why but I think guns are just beautiful. Especially older ones. The precise machineing, attention to detail, blued steel. Just amazing

@jfwl1985 8 лет назад

I'm Argentine, I am so envy of you boys, a Ruger 10/22 is worth U$S S800 here. Sorry for my english.

@boomerisadog3899 5 лет назад

You can get them for as little as $200 new here in the states.

@joerobo682 5 лет назад

Hey, it's ok, I'm born and raised in Winchester VA. and I can't speak English too good(very good, more betterer.... whatever;)

@briantruck2284 4 года назад

Wow

@mrd7341 7 лет назад

... I'm from Austria and bought a new Marlin 336W and I have to say it looks very good. The grip is cut very precise, the diamond cut on the grip looks good (not like Chad's) and the sights are damn straight too ... I don't know if I just got lucky or they changed the manufacturing ...

@dubyadelta4057 8 лет назад

I beg to differ when it comes to the 1100 that was my first competition shotgun and I just changed the barrel to a hunting interchangeable choke and it was a great gun of which has been used by my father and me for about 40-45 years.

@celowski6296 6 лет назад

Just bought a Ruger SP101. Beautiful finish and fitting... Just as well made as my centennial single six..

@mini14head Год назад

Totally agree on the Quality of CZ. My 1960 marlin Golden Mountie is probably my favorite quality rifle I own. Shoots standard velocity half inch 50yds. Open that lever as slow as u can still throw cases 10 ft.

@ajttambo 7 лет назад

My 1982 Remington 870 Wingmaster is the highest quality pump shotgun I have shot. I just wish Freedom Group didn't ruin Remington so they could make guns like that again...

@tatewaggoner6546 5 лет назад

ajttambo old Remingtons are about as good as they get, i have a Remington Nylon rifle from the 1950's that my grandfather gave me, that thing shoots like it came out of the box yesterday

@pag9128 5 лет назад

My 1187 from 2010 or so shoots great

@jeffscuderi8662 4 года назад

You obviously haven't shot Ithaca 37 Browning bps marlin 120 all better than 870

@sierge1 8 лет назад

Eric and Chad I noticed that you never mentioned Savages quality. All of the Savages I have seen appear to have excellent quality. Thanks for the info on CZ's I am going to look into them.

@pseudopetrus 7 лет назад

I am very pleased with my Win Model 70, made by browning, in Portugal, and it is very good quality. They are not the cheapest but I am very pleased with it. Shoots very good too. It's got the Mauser type action.

@twowheelsshy 5 лет назад

I bought my son a Marlin 336W (30-30) last year. Winchester is the only ammo that doesn't fail to eject after a shot. I called Marlin and they said "Sorry, that's an ammo issue, not an issue with the rifle". Done with those guys.

@nmr6988 5 лет назад

I love all your videos where short OR long OR in-between. Duration isn't a problem!

@ftwr6s 8 лет назад

back 2006, I bought a Springfield 1911 a1 widebody (13+1). I've had nothing but problems with it. sent back to Springfield, new slide, slide stop barrel, and bushing... still nothing but problems. (fail to feed, failure to eject, double feeding). bought a different brand of magazine, gun Smith polished the feed ramp, messed with the extractor, still fails... cut to early 2016, bought a used Taurus pt1911, slide stop broke after putting 200 rounds through it. got fixed. sold it. bought a ruger sr1911, 1000 rounds through it, not a single hiccup. ruger restored my faith in 1911's.

@ZzBiohazzardzZ 8 лет назад

They aren't made with love anymore.

@stopthephilosophicalzombie9017 8 лет назад

+ZzBiohazzardzZ Even love isn't made with love anymore. ; )

@Iraqveteran8888 8 лет назад

+ZzBiohazzardzZ this comment makes sense to me. I'll elaborate about my experiences at the Smith and Wesson booth at Shot Show this year. So I walk over to look at the new Smith and Wesson VIctory .22 pistol and I promptly begin asking the guy sitting behind the counter a few questions about the gun (because I didn't want to sound like a complete idiot when I talked about it on camera) The guy I was talking to was an engineer and he acted like it was such a pain in the neck to have to talk to me and acted like there were 100 places he would rather be than right there talking about a product that I'm pretty sure he probably had some involvement in making. His lack of enthusiasm was pathetic. I mean damn I don't expect them to be wearing green vests with flair all over them, but when a guy walks over with 5 employees and 2 very expensive cameras you would think they would put two and two together! The moral of the story is love your job, do it right, or go the hell home!

@ZzBiohazzardzZ 8 лет назад

***** Right on brother, I couldn't agree more. I think that's the main problem today, is that we have a lot of people doing a job that they don't like doing, which often times results in half-ass work.

@brandonrides8953 5 лет назад

nothing is

@danielaramburo7648 4 года назад

Mark Belk I remember an interview with a lady who assembled ak47 and ak74 rifles in a Russian factory. She said with passion “I know this rifle will end up in the hands of a soldier who defends my country. I assemble it with love and make sure all is correct because it might cost a soldier his life if I don’t do it right”. This passion is not seen in many workers just doing enough to keep getting a paycheck

@mattdg1981 5 лет назад

Gotta say. Love my rugers. That being said. My new 10/22 isn't the same one I grew up with. I do enjoy my saa rugers though. My single six and super Blackhawk 44mag are awesome guns.

@lonewanderer3603 7 лет назад

Ported barrel 38's are so easy to shoot, they are good for a whole day of fun on the range.

@cmj20002 6 лет назад

I have an original Marlin Guide gun in .444 Marlin and I love it. I like the new ones as well. They are not as good as the old ones, but they are getting better. I love Marlin Rifles.

@dadeereater 8 лет назад

I had an old walnut stock ruger m77 mark 2 in 308 and that thing would hit anything you could see, never should have sold it

@lucignolo8333 8 лет назад

Shame

@LAWSON08 8 лет назад

+Nathan Griewisch I have one! Bought it used too. It's a good deer gun.

@DieWolfen 8 лет назад

+Nathan Griewisch I had a Remington Model 77 Sportsman that I wish I never sold. It was in .308 and dead accurate.

@BSE1320 8 лет назад

Have a '82 Ruger M77 in .30-06 with the tang safety. I'll never get rid of it! :)

@free2chasehappy 8 лет назад

Should have jump on Remington more often. I would touch anything with the Remington brand on it, except remoil. lol

@travistucker7317 4 года назад

I worked there. I feel the exact opposite

@GaryHart69 5 лет назад

Got that 452 American Scout for my boy as well. Have been Thoroughly impressed with that little rifle! Very Accurate!

@77Infidel 5 лет назад

Yep. Bought a 452 youth scout for my son. Can shoot with 1 (magazine spacer), 5, or 10 rd mags. Love the short stock and barrel. Too bad he loves the Cricket more. Oh well. Looking for a full size stock for it as he grows. The 452 has been discontinued for the 455. Great rifle.

@Tony-fb1ij 4 года назад

Love my 452 American LH.

@Kyrimfireandhobbies 7 лет назад

I know you guys shoot a lot of Kel-tec guns but I recently bought a sub 2000 in November and the lower broke where the latch for folding is after 50 +/- rounds. I will say I sent it back for repair and it was fixed and back to me in less than a month. Now that it's fixed I love it. Kel-tec warranty service is great

@brianmead7556 6 лет назад

Something a lot of people don't think about is that $300 now ain't what $300 would have been back in the 80's. The equivalent would be a thousand or more. A thousand dollar gun vs a budget gun, expect a huge difference. Now, some companies, Ruger, Remington, and Colt immediately coming to mind, have gone downhill. Remington especially.

@RobertSmith-le8wp 8 лет назад

This is why I like combloc and former combloc countries. On top of military rifles, CZ makes some great hunting guns. Same think with VEPR and Saiga. It's really a shame they do it better than we do

@alexanderkuhn7416 8 лет назад

As an engineer from Germany my opinion is that back in the times products as guns and everything else was built to last. Today's products are engineered and build to break after a certain amount of time. It's as simple as it is.

@Iraqveteran8888 8 лет назад

+Alexander Kühn thanks for taking the time to leave a comment. It's appreciated.

@MoreAmerican 8 лет назад

My m1 garand from Springfield armory was forged out of steel in April 1944. They don't make them like that any more. It is heavy as shit though. My AR is like 6 lbs. pros and cons, pros and cons

@johnrisinger7484 6 лет назад

Great video. I had to go back several times to catch what you. Lots of valuable information. Thank you so much, and keep up your good work.

@bcalla 2 года назад

You mentioned at the end of the video about personal experiences. A few years ago I picked up a New Vaquero and first day on the range after about ~20 shots in first shooting, the revolver stopped working. Sent it in to the company and sure enough, the wrong spring was installed which controlled the transfer bar resulting in essentially dry fire. Got it back and ever since, a great revolver (45 Colt btw) but definitely a manufacturing defect. I will say, Ruger was super awesome about it and fixed it without cost to me so kudos on the backend service...but it was a legit defect out of the box.

@michiganlifepreppers540 5 лет назад

Adding to this. If you had to build a new modern SKS rifle according to original specs it would cost $1500 or more. I’m an SKS fan considering

@chrislaswell2813 5 лет назад

M1 Garand and M14 were made with forged receivers. The Springfield M1A today is made with a cast receiver. Also something to think about is the overall decrease in craftsman in our country. The "you have to go to college" mentality I think is to blame.

@jeffscuderi8662 4 года назад

Nothing wrong with cast though rugers are and they work great

@adamyorke7869 8 лет назад

Value engineering. The crippling of craftsmanship.

@762N8O Год назад

I keep staring at that brownells hat and have never seen it for sale before.

@heroinmom153 Год назад

The old Smith and Wessons were hand fitted and well tested, pinned, etc... My dad's 1982 police carry 13-2 .357 has had many thousands of rounds through it for training and qualifications, and even when the department switched to semi in '94, he carried and used that revolver until he died, and now I use it and love it. Not that the new S&Ws are cheap, and S&W is always great, but having so many hot loads through that thing over the years and still being in excellent shape is a testament to it's build quality. I recently took it apart to clean the parts ultrasonically and re-oil, and there's such little wear inside I couldn't believe it. He took care of his guns, but there's as much play in it as there is on a new revolver, and that's after thousands and thousands of .357 rounds and 40 years. You can even see some of the hand fitting marks where the gunsmith who assembled the revolver would take off tiny bits of material with a file for a perfect fit.

@charlesbaylis8650 Год назад

500 years old and Beretta still has its lemons

@zillsburyy1 Год назад

beretta sux

@andreawhalen4142 Год назад

@@zillsburyy1 The beretta 92 clone from girsan is built better than the beretta

@45AlfaCharliePapa 8 лет назад

I would look at the firearms being manufactured today as you would look at wartime surplus. The manufactures have been racing the last 4 years to meet current demand along with trying to balance introducing new products consumers are looking for. I would much rather purchase a Ruger from 4 years ago than one made today. Not that the ones made today are bad guns, it is just that 4 years ago they a little more time to assemble and finish the guns.

@sportytone1 6 лет назад

Found it! Try the Remington Model 550 or the 550-1. Not easy to find and relatively pricey, but a great rifle and definately an heirloom rifle.

@tylerdean980 5 лет назад

I’ve never had a gun that was a lemon, but I do own a used double stack para 1911 that drops mags really easily. Like after shooting a round.

@ThePongo357 6 лет назад

The 10/22 is not a "budget gun". The Savage 64 is a budget gun. The Marlin 702 is a budget gun.

@TexMoto 6 лет назад

I have a early 70's Dan Wesson Revolver. The quality is amazing.

@donjuanjohnson3692 4 года назад

What caliber?

@justindana1 8 лет назад

I can't believe that you guys didn't talk about Winchester 94.

@Iraqveteran8888 8 лет назад

+Justin Dana there's only so much we can talk about in this video. Think about it...if we used examples from every company out there, this video would be 5 hours long. People are claiming that we are throwing ruger under the bus. This is not true at all...the reason ruger is represented so heavily is because we OWN a lot of ruger products. Same with anything else in the video. Maybe a Winchester wasn't in the video because I don't own any of them....in which case the quality doesn't matter 😇

@justindana1 8 лет назад

It's ok, awesome video though.

@Iraqveteran8888 8 лет назад

+Justin Dana on a serious note I collect vintage Winchester .22 rifles. Not a fan of anything else they make.

@justindana1 8 лет назад

Yeah if I was going to own the Winchester rifle it would have to be a original Winchester 73 or a pre 64 winchester.

@johnnybloggs2494 8 лет назад

+Iraqveteran8888 I miss Barry. Eric is an eye sore in these videos. Please get another partner. I know nobody could replace Barry. But get someone who can fit in well with you.

@adrianlarkins7259 8 лет назад

I'm an old Limey, 72. What you think is old is nothing. I had my first air rifle aged 8 in 1953. It was a Diana 177. The quality was good but I didn't appreciate that until I replaced it with a BSA Meteor 177 in 1961. It was crap. PLASTIC. So, when you say old I think you should know the question of quality is relative not only to the era but also to the the manufacturer. If you buy expensive top quality today, chances are the quality will be as good if not better than yesteryear. In other words, as the Cockney saying goes, "Yer pays for what yer gets". I own a CZ ,22 magnum bolt action rifle. Not that expensive. I do not know how old it is but it is stamped Czech Republic so it's post Soviet Union. Quality good.. Style good. Bolt action good. Accuracy good x9 scope. Real value for money. I understand their quality has been consistent. If you buy from a low quality manufacturer. expect low quality. The problem is when you buy a gun from a maker with a good reputation only to find it's rubbish, then you have reason to be angry. Marlin is the perfect example and Ruger should watch out..

@devinstarkey222 8 лет назад

amen to that. like my little .22 i had a choice between a marlin or a remington and I didn't pay much more for the remington but it has definitely proven to be much better quality than the marlin was

@adrianlarkins7259 8 лет назад

+Devin Starkey Yes. I understand Marlin has improved but is still nothing like it was. As for Winchester, forget it, unless you buy an old one, pre 1964, I think. It's really sad to see these famous names going down the drain.

@devinstarkey222 8 лет назад

+Adrian Larkins there are very few companies anymore that you " get what you pay for" whether it be cars, guns, and even computers. 1970's and 80's 350 small block chevys ran like Champs compared to the newer "improved" models, winchester went from being more or less the top of the line "budget" firearms to big box store specials and basically any computer you can buy at a store now is basically twice the price of the what it's worth, more like 600 in parts and another 600 in assembly. which is why I'm building one from scratch as we speak part by part. the only thing that I have found as a worth the price kind of quality is knives and axes.

@devinstarkey222 8 лет назад

+Adrian Larkins call me an outsider/ weirdo but as long as there is a technical or mechanical aspect to it then it catches my attention and intrigues me. the fact that the most basic of computers today contain the same power as multi million dollar systems did back in the past just amazes me, and to top it all off the fact that you can make it look and act as you wish as you are building it is what draws me to it, just like how there are multiple accessories and kits available for our guns to handle as we feel most comfortable and as efficiently as possible for whatever purpose we desire. all of these seemingly separate systems are quickly becoming more conjoined every year while "budget" weapons no matter how high the quality used to be are showing more of what they are actually called in themselves and that actually is budget quality. it kills me to say it but it's true

@Nostrildomus 7 лет назад

Spot on Limey . I'm in your club over here , with a brand new Remington with a Nylon stock . Was great , light as a feather and ran like a sewing machine till you stepped on it by accident years later and out of production . I love C.Z. too . Thanks be

@vocalcoyote9375 5 лет назад

The one example I always think of is the Remington shotguns: my friend bought one that was new and it's only been a few years and the finish is already peeling off, same with my uncle's wing master he bough in 2014. Just a couple weeks ago I bought my own 870 wing master deluxe, I payed a pretty penny but it was assembled in 1960 and so far I've put about 150 rounds through it (mostly birdshot) and it shoots smooth and fast.

@gageburns1261 4 года назад

Vocalcoyote not just their shotguns, rifles have really went down the drain as well. The X-Mark Pro trigger was a disaster that has cost them millions and millions of dollars. The 710 and 770 were absolute junk, not even worth $150 in my opinion. The 783 is alright for a $300 rifle although I think the Axis an American are far better. 700’s made today just don’t feel like the 60’s-80’s 700’s I have. The only newer guns I own are a Browning X-Bolt and Savage 110. Everything else is 80’s and older

@nukem3020 6 лет назад

I gravitate towards older firearms that are rare-ish or noncommon under the radar stuff. If a newer style firearm does come out that is interesting, I research it and do my "homework" on it to see if it's worth it. Staying open-minded about different gun makes and models does help.

@Gilbertmk2 7 лет назад

My ruger American came with a warped stocked that touched the barrel on the left side. They sent a replacement stock and that one had the same problem.

@glennwih 8 лет назад

If you had to take 1 rifle to another planet, what would it be?

@bigwesandfriends2602 8 лет назад

AR15 because Obama can't reach out that far

@ROGUESPIRIT_ 8 лет назад

+glennwih rail gun

@dukenukem8381 8 лет назад

+glennwih , i d take some food

@glennwih 8 лет назад

The guy on the history channel said AK-47. He is fat and bald and knows a lot about guns.

@gtojoe04 8 лет назад

+glennwih and you sound 12 asking that question.. so let's judge..

@tite93 8 лет назад

Well, gonna wait for that HD.

@psynque 8 лет назад

Why?

@CountArtha 8 лет назад

+ThornInTheEye I remember 240p. They don't make 'em like they used to.

@WCGwkf 8 лет назад

+ThornInTheEye You'd have to wait regardless if they waited to process HD before posting.

@TheJonesChannel11 8 лет назад

+ThornInTheEye It's 2016, and people STILL mention this.

@Ajibica117 8 лет назад

Gotta have that high resolution for two guys sitting, talking in front of a camera for nearly an hour

@benmadderom2281 5 лет назад

My friend got a brand-new Marlin 795, Stainless in about 2011-12, and the rear sight was tacked onto the barrel, CROOKED! It was so far off, you couldn't bend it into alignment. We just threw a pellet rifle scope on it, and went to town. It's been a tack-driver, ever since, and it runs like a champ.

@omgthatsimmaculate6134 7 лет назад

Chad, I have the mid 80's 77/22 rifle you speak of. Your 10/22 mags will work but they don't fit flush on the 77/22. You'll have to get the actual 77/22 mags or they will irritate you to death because the fitment is off just enough.

@hawkboy1792 8 лет назад

the thing is, back then, all of these rifles were made on manual machines. Much more craftsmanship, hand work, time and personal touch went into each one. In doing that, you've got guns from the 1900's that are accurate as crap and are finished beautifully. Nowadays, most of the work is done on CNC machines. Less time, less personal touch, less human labor which is more cost effective, but in doing that you remove the human touch aspect of it, dare I say "the love"?

@IBDaddyO 8 лет назад

What, no Rem model 870? That's a classic!

@johnwunder3521 6 лет назад

do a comparision 870 express/870wingmaster, old ones /current ones

@zacharycrume4048 6 лет назад

The new 870's are crap compared to older ones. The quality control just isn't there. Tool marks and cheap metals

@johnwunder3521 6 лет назад

thanks to corporate bean counters ect... winchester( gone),remington,marlin,smith wesson & others make junk now.... cut corners,.. fire older skilled craftsman ,hire new unskilled laborers that don't give a f--k.....probably shut down soon..... i think sorros,bloomberg & other NWO ,UN types are linked to this..... billionare businessmen.. ..undermineing entire gun industry....??...liberal democraps will try anything .

@05srt4turbo1 8 лет назад

I'll put my Ruger GP 100 match champion against any S&W any day

@Nobody-xh5qe 5 лет назад

You should get a hold of Jerry Miculek

@gungho1345 Год назад

Love my 10/22. Started as a $165 rifle. With upgrades and what not I have close to 1k in it now. She'll put a quarter size group at 100 yds any day of the week.

@dang7669 5 лет назад

Ironically (or tellingly) the tools that were used to fit these wooden stocks are probably the best example of 'not making them like they used to'.

@popacap21 8 лет назад

Personally I like listening to these Gun Gripes while taking a nice morning shit

@CSGSurvival 7 лет назад

And shooting a deer out the window hahaha!

@Nostrildomus 7 лет назад

We know , you seem to have a lot of company on the gripe portion . I wouldn't expect you'll learn any thing except these men will be trying to save yo stinking ass till you pass . Good By

@andrewclark3977 6 лет назад

Damian Grouse I brought a bottle of poppers to my prostate exam so it'd be easier, the doctor was not impressed.

@Mrgunsngear 6 лет назад

great topic

@HeavyJ318 5 лет назад

What about Remington 700? I have heard bad things..

@michaelrandell4021 Год назад

I agree. My '71 Marlin 60 squirrel stock .22lr. I put over 8500 rounds thru it and the guts wore out, I rebuilt it. I have worked for OF Mossberg. And have made bolts for the AR15's over 250 million made there over the years. Now in days I call it repalitory fade, due to so many of the same parts being made. You are right. When production was slower. Defects were more easily caught. I see Charter Arms mag pug front sight you would have to grid down to nothing, Ruger GP100 tool marks in lug, Smith & Wesson 686 latch fell off, 629 rear sight maxed to the right,617 rear sight wrong height. Taurus PT 140 trigger pull 7lbs. Winchester 1400 20 ga. shot gun tool marks on bolt. The quality on these guns, suxs. So now I build my own. All my rifles shoot 1 moa or less. The aluminum receivers these days are the disposable Era. My Savage 520, 620 12ga. '29-'49, model 30 series D 12 ga., model 99 level rifle 308. '69 Remington 700 .243 will out last anything till after I die. They were made to last.