No video :(

HABOTEST HT203D CATIII 600V 6000COUNTS .AC/DC CLAMP

Подписаться 3,3 тыс.

Просмотров 4,8 тыс.

50% 1

HABOTEST HT23D
CATIII 600V,6000 COUNTS
AC/DC CURRENT CLAMP
W/MULTIMETER
600A
25mm mouth
sorry
++data prepare progress++
CATIII 600V
AC/DC CURRENT CLAMP
METER,28MM,
6000 counts
VA SCREEN
WITH
DIGITAL Multimeter
size xxmm
weight g
battery 3X1.5VXAAA
TEST pen
CATIII 600V,10A,68CM
LONG PVC CABLE
,4MM PLUG
DCV 0.1V to 600v
±0..5%+5
SMART MODE 0.8V MIN
ACV 0.1V to 600v
±0..8%+5
SMART MODE 0.8V MIN
ACA
0.1A to 600A ±2.5%+5
smart mode 0.8A min
DCA
0.1A to 600A
±2.5%+5
±3%+10
±5%+10
smart mode min 0.5A
resistor 0.1 ohm to 60Mohm
±1.0%+5
capacitor 0.01nF to 60mF
±4%+5
Diode output voltage
3.0V
continuity lessthan 50 ohm
may be beep SOUND on
FREQUENCY
0.01HZ to 10Mhz
±1%+3/±3%+3
Duty cycle 1 to 99%
Temperature -40 to 1000
degree C
*3 degree C/±2 degree C±2.0%
DATA HOLD yes
‘continuity yes
ncv yes
Torch yes
apo(auto power off ) yes 15minute
duty cycle yes
Live（hot wire test）yes
made in china.
(eyesight data record
may be error).
Board KJ-3
UL 94V0
E255694
3922
HT203AD V1.2
PTC MR3
CRYSTAL X1 4.000
R39,R40,R41 3203
R1 BRN,BLK,BLK,YEL,BLUE
R2 BRN,BLK,BLK,YEL,BLUE
R8 01C
Q8 A1SHB
U4 BU9792AFUV
220901
R34 0
U3 6208A
4PIN 2218133
R7 105
R17 564---
R6 BRN,BLK,BLK,BRN
R5 BRN,BLK,BLK,RED
c3 ？
R4
R3 BRN,BRN,BLK,BRN
R2 BRN,BRN,BRN,YEL
R13 01A
C1 ？
R11 01C
U1 DMSC6000
FC77
C4,C5,C6,C7,C8,C9,C10
C11,C12,C13,C20,C21
R15 01D
U2 HE 24C02
8PIN U361B
R21 01C
R22 01C
R24 01C
Q3,Q4,Q5 Y1
R52 01C
R49 513---
R48 513---
R51 01C
R50 513---
R53 303
C18 ？
R55 01A
R29 105
C2 ？
14pin ic GS8554
CE498A
Q1,Q2,Q12,Q13 Y1
R16,R14,R39,R42 01C
RLY HFD 31/3-L2S
1A 30VDC
0.5A 125V AC
YC069
R18 300---
R51 513---
VR1 ？
R38 513---
R47 680
U2 HE24C02
U361B
SOP-8 storage ic
Q10 3pin 8525
C17 ？
R28 01X
R36 10J
R26 513---
Q11 Y1
R58 01C
R25 513---
Q6 Y1
Q7 Y1
C16 ？
R32 30F
R23 01Ⅹ
R12 01A
R10 300
R2 300
BUZZER ？
end.
THX FOR WATCHING.

Опубликовано:

26 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 15

@heyitsdrew 9 месяцев назад

when you measure resistance between the leads, it is 0.2. and all other readings are 0.2 higher than what they should be. like 0.7 for 0.5, 10.2 for 10. 1.2 for 1...

@wilsonluilui 9 месяцев назад

yes,if the test pen pair resistor is 0.2 ,when measure in same range and same room temperature as 22 to 25degree C ,and that is proportional.

@wilsonluilui 9 месяцев назад

and in my video is normal home temperature measure,it is about 25 to 35degree C ,and near the normal use as work in outside work times for me,if you want to get high accuracy pls measure at room temperature 22-25degreeC .

@qolbunsalim5188 Год назад

Thanks for the review mr. Wilson. Please also test this clamp meter on DC current mode below 1 A (please make a video on this test). I bought its little brother Habotest HT206D, i love it so much. 400ma-1A accurate. 100-400mA good enough. 40-100mA we have an idea abt the current value..

@wilsonluilui Год назад

this meter we test is have so many error occurred,for my first page photo you can see ,i give up this meter ,expensive,waste money,down thumbs. it is habotest expensive meter but bad QC products ,if you have this in good condition pls tell me again.and i will test on this meter in under 1A and show it again.thx for watching.

@ltan888 Год назад

@@wilsonluilui Hi Mr Lui, many thanks for your good review and your honest feedback on the eventual failure of the HT203D Clamp meter. I had bought the ANENG ST206 Clamp meter back in June 2021 and its DC current measurement, DC voltage, Resistance and Temperature measurements are never accurate (in excess of 10% error) since day 1. I'd really regretted buying this ANENG ST206 Clamp meter. I had bought the ANENG ST206 Clamp meter because I thought I could trust this brand as I have their ANENG Q1 DMM, which has performed well to my satisfaction even till this day. I believe many of those Chinese brand Clamp meters are of poor accuracy and I've seen several bad reviews on RU-vid even for UNI-T Clamp meters, especially with poor accuracy. With your experience, can you recommend a reliable and reasonably accurate Clamp meter for my consideration? Thank you.

@wilsonluilui Год назад

and for my testing of many Chinese clamp meter,it aneng,uni-t also have good or bad qc,and only fluke is in good condition in about 3years,after maybe have problem of fluke ,i have a fluke clamp meter the resistor function error,and if you want to buy a cheap one clamp meter,by aneng is also have good in few years.

@zullakim29 17 дней назад

im buy this new model ht 205D...but im confius how to check a capacitor?please tech me..i have 82 uf capacitor..i confius when im touch a probe + to + capacitor and - to - capasitor im got a 72 uf..but when im touch a probe + to - capacitor and - to + capasitor im got a 82 uf..thats its normal?.. and its normal or not when im select mV it look like unbalance..my multimeter measure it self although im not touch my probe to anything...😢

@wilsonluilui 16 дней назад

@@zullakim29 sir,when you make a test on a capacitor first must be recharge it,than make a test on the cap,and must not add on your hands ,or touching any -,+ Of the metal parts.

@zullakim29 16 дней назад

@@wilsonluilui thnks so much sir to respond..and another thing..is it normal when im select mV like your video..the multimeter is so unstable.. he counts himself without me touching anything.. im really feel bad cuase after I bought it, I found your video..your video really detail..thnks

@wilsonluilui 15 дней назад

@@zullakim29 in Mv function normally is not stable in many kind of multimeter because it voltage is so small and the digital may move up up and down fastly sir.

@zullakim29 15 дней назад

@@wilsonluilui thnks sir..for your helping..im first time use auto multimeter .so i have little bit confiuse..thnkss

@wilsonluilui 15 дней назад

@@zullakim29 thx for watching.