Thank you for the video I bought one of these heaters about 4 years ago and it came assembled already so I bought a second one and it wasn’t assembled so I opened it up and saw all the parts and put it in the corner of the garage for 3 years so tonight I finally had to put it together and I found this video probably took 30 minutes tops not sure I stopped the video a couple times and skipped ahead a few times where I already took the plastic off
That blue film is a royal PIA. Maybe because I'm in a cold climate, it just won't come off in big pieces. I'm peeling it about 1/2" at a time. Going to try a wire brush because I don't give a damn how the reflector looks. Once again, I'm convinced it's your typical CCC. (Cheap Chinese Crap.)
1) Turn the gas on at the LP tank 2) Turn the black temperature control knob to the high position and press it in. You should hear the gas coming out (a hissing sound) 3) Next press the red igniter button while still holding in the black temperature control knob. The flame should light. 4) Continue to hold the black temperature control knob in for a while to let the heater warm up. 5) Release the black temperature control knob 6) Adjust the flame as needed with the black temperature control knob Hope this helps
