Harness the Power of Nature: Build Your Own Wind Turbine for Free Electricity 

Everything is fake, the distance between the magnet plate and the coil plate is far too large at almost 1 inch, with that distance it would only be enough for an LED. The PCB is not an inverter but a 12V power supply. What everyone should notice is that when the load is switched on, the speed should decrease, but that doesn't happen. Next time try a little harder when you're trying to fool people. However, the mechanical structure is very well done.

Can you please give the length of the copper wire or the number of turns per coil

It would never work the light would flicker intermediately and would be dim while being plugged in with the fan I’m going to go with there being a 12v battery inside the fan base running the 12v motor in the fan with a 12v lamp him stopping the turbine cancels a contactor witch turn the fan and light off

Well, that's cool! however, the fan is 20W, the bulb is probably 60W - a total load of 80W. And where did the remaining 1420 Watts of the announced power go? Another person pretending to be Scheherazade filming fairy tales from 1001 Nights???🤣🤣🤣

Sorry. There is no way here.... None at all. The overall concept is sound but the application is not, in more than one way. I doubt that even in a gale force wind... The air gap, size of magnets, the size of the coils, the number of coils vs number of magnets. No way that set up works. The geometry of the coils dictates the placement of the magnets. For those who have noticed the extreme gap, also 5 coils would require 10 magnets. There is real science in the concept, but almost no understanding of it in the application. That turbine is not powering that fan. A simple mass, volume and velocity equation just on the fan verse the turbine would not balance at 100% efficiency.

It's hard to earn money... When someone's bench it's their own feet... 😅 5 stars for the effort on the fooling scheme 😂

Green screen

really work it??

Hahahaha it a fake... Very small coils generator in turbine for 220 V :))))

The only thing real about this video is the number of views it has. That part is smart.

Good idea very simple

Меня, вот , что удивляет почему подавляющее большинство иностранцев верят таки видео и даже спрашивают как это сделать. Они , что не знают элементарных основ физики.

Awesome! Thanks so much for showing! Also I like how it is a stock background music on a loop, but still seems to hit all the beats of your fabrication haha.

Thanks ❤

Funny on my dual axial my rotor to stator gap is 3mm.

Great minds in work

What sized baterys you use to turns the windmills, it looking almost real. I recommends you watching the video with lady explan turnarouds

Incredible innovation! May I know what kind of motherboard you used to transmit power from the alternator to the extension?

THANKS very smart you make it look simple,scale up and patented and we will buy $$😊

Your work is incredible, I would like to know what material the plates N, S are made of which you then cover with resin; Thank you.