Hasselblad Repair.mov 

Thank you so much! You saved me 600 euros repair fee.

Excellent video. This worked for my issue. The shutter somehow released on my 80 mm lens as I was mounting it to my Hasselblad 500 C, before the bayonet was fully turned and the lens fully installed. The shutter was in then in the released state but the lens was not fully mounted. This procedure let me remove the lens. Thank you. With the knowledge from this generous video, this is fairly simple work, but you must have a good screwdriver and tweezers help.

This video was the solution to my trouble. Thank you so much Annie78. I would add that the first part, where you detach the left upper screw and turn the right lower one to the right a bit, deflects the beam that is the extension of the gear shaft and spring is separated from the base, and that allows to lens to be removed. In my case, the mirror flipped up and the auxiliary shutter behind opened But once the lens is detached, the camera itself continues jammed. In my case, I could not wind the crank (knob), press the shutter or lower the mirror. Once you return the right lower screw to the original position, by turning it to counterclockwise, and the beam and base are pressed together, the camera system returns to the original position, and you can rewind the crank and operate the camera. As it is shown on the first replay, when you press the two metal parts of the body, it can be seen that the gears are now free to turn, which lets the camera mechanism also free. At first, when the lens is detached, you think that everything is solved, and you get concerned when you see the camera jammed. You get a big surprise when you the camera return to the normal position once you press the two metal parts together' Thank you again for your thorough work!

Didn't realise you couldn't remove the lens+extension tube so they got stuck on my 500cm. Everywhere online suggested an expensive fix. Only you actually showed how to do it, simply. Thank you very much!!!

Thank you so much for having taken the time to make this video! I managed to fix my Hasselblad and saev myself some very expensive repairs fees haha

this is a great help, I especially like that you showed the sequence several times, so there is no confusion on what you showed us. Please make more!

thank you so much!! got my camera jammed by incorrectly removing the macro tube, and this saved me!! your shots showing how tightening the second screw interacts with the pin on the lens mount were great! gave me confidence to do it myself. 🎉❤

Big thanks for this video. I was on an island in Bass Strait, Tasmania, Australia when my 'blad jammed after taking off an extension tube the wrong way. Your video got me back shooting again when I thought all was lost. My bracket needed a pretty firm pull after loosening the screws, so take note viewers. Anyway, got some great shots AND saved a heap of money for a pro repair. Keep it up! Justin.

I never comment on you tube videos, but this clip is a total diamond. Thumbs up and respect!

Thank you for this excellent demonstration.

Thank you for this excellent video. You have saved me a very costly repair.

excellent! Please do upload the C lens repairing video. There are lots of people interested. Thank you very much!

Great job maybe more 😎

Next time you service a C lens you should do a video! I'm sure a lot of people would love to see how.

@hlvegemite66 I am very glad for this video to be able to help you. Cautions are required especially when using Hassel Brad's extension tube. Thank you for the message.

many thanks for this very helpful video. i have a 503cxi and the lens is blocked i could'nt remove it. Thanks you rvideo i hope i will be able to manage it now ! very appreciated help!

Thanks a lot I was clueless for a week and this solve the issue I had with my 500C

really thanks for this video! saved my camera!

There is Hasselblad specialized tool in this trouble. However, another method is required when a problem is serious. This method is help, when a gear gears deeply and is crowded. This method is a method safely solvable at the time of a serious illness level.

It was good that this helped you! Thank you for a message♪　

Thank you, thank you, thank you! This was a huge help.

Thanks a lot. You really helped me with this video.

Excellent video, thank you very much.

Thank you!!!

ANNIE7B Thank you very much, you are the best... Bless you!!!

@chightower26 Hello! Thank you for the comment. Is "CLA" a meaning of the repair? Yes, I repair C Lens.

your video get my jammed 500c fixed, really appreciated!

@chightower26 Hello! Thank you. I will make the repair video of C lens some time.

hey annie! two days ago my Hasselblad500CM jammed with the extension tubes on and I did take it apart but experienced a problem - the right screw (which should be tightened) fell somewhere into the body and now I cannot find it.. can you please give me some advice what to do now?

Very helpful video

Hi, great video! I have just purchased a Hasselblad and had this problem, the video helped a lot and my body now works fine. However, I am having trouble re-cocking the lens - the shutter is closed and it won't let me turn the coin all the way around. Any ideas on a fix?

I'm glad I could help. Tanks message.

Awesome, followed the steps - helped me fix the issue and prob saves me quite some €€€. Great vid!

You've got a new subscriber👏🏻

u r a life saver!!!!!!!!!!!!

This is great! Have you ever done a CLA on a C lens?

Hi, thanks

Hello there! Do you know what happens if I try to use the 500c/m without the screw (and the plate) you've unmounted on this video? Everything seems to work in the same way..

Annie, I have watched your video several times and would like to try this because my lens is stuck and won't come off the camera. Is the first two steps you showed all you need to do. I understand these two steps. You also said something about an opened space closed is this something I have already done in the 2nd step or do I need to do something else. It is hard to see in the video you showing the open space closed. Please help me. Mary

hello Annie. I Have a a12 magazine (500c 1966). Film magazine jammed after I loaded a film incorrectly. You know some technique to get release and remove the magazine. Thanks

THANK YOU, I NEEDED THAT

@tarzoonofjungle Hi Were you able to repair safely? I am very glad to serve my video. Thank you Message!!

Hi! Thank you for the message. I am very glad!^^

Yo bro, GREAT vid! Thanks.

any advice... my lens will not mount on my 501c hassy, both the lens and body are fully cocked.

I wasn't able to do this because I did not have the proper tools. Where can I get tools that would work on the Hasselblad?.

I would like to help your problem. However, since there is little information, advice is very difficult. What is your Hassel Brad's kind? 500CM? Doesn't a 「back shutter」 open? why Did it become impossible to take off a lens? When a problem is complicated, it may be difficult for you to repair by yourself…

Annie, long time no see. We talked many years ago on your Linhof video. How are you

Perfect!

Please ANNIE7B, Do you think that a problem in which the body is not triggering the lens when you depress the button (but do it when you relax the button) is related to the elements described in this video?

Thank you for the message.^^

Does anyone know how to replace and re set the focus on the mirror foam 500CM ?

Where do you buy that screw driver? Also need a screw driver for the left screw? Thanks

@johnnyxue1 Hello.Thank you message! I want to make a new video.

Hi hello. Thanks a lot!!♪　

@hlvegemite66 I am glad if this video is helpful!!!

レンズ外れません😢😢😢😢😢

Stop ! This video is wrong. In most cases when a lens is stuck the only thing you need to do is to wind the shutter with the silver screw. Dont touch any other unless cocking the shutter with the silver screw does not fix the problem

☀❤🤙

You really should stop using google translate!