Haul-Master 400 Lb. Motorcycle Hitch Carrier Review: 2021 KTM 500 EXC-F 

Thank you for the excellent informative video. I am installing this carrier and the instructions are typical poorly illustrated and written. You video made installation clear.

Not showing the actual ramp in use negates a lot of the leverage of this review. If it was a decent struggle and required significant effort, you should show that.

Nice 👍🏻 I plan to get it for my future Honda 250f 🏍

Add skate board grip tape for better grip on aluminum, a friend said.

You cranked that thing down so tight, you are bowing the entire tray down ward on both ends. Was ready to buy this to try since it's so cheap, but this video has changed my mind

It’s now 2023 , April, new cost is $170 plus tax, since 3 years ago they cost $110 . There are many fairly easy ways to modify the Harbor Freight ( Haul Master) . If I could pre-sell one , I would share my modified rack and some neat tricks I did for my Aventon Adventure. I hav an idea for trying to make it for two E-bikes . There’s no welding but you need a good rivet gun and 1/4” rivets, I used my saber saw and my leaded plastic hammer , four very good dril bits 3/16” & 5/16” most important. Use your head while drilling, know how the drilling drifts because you have to drill at an angle. Make precise measurements and note that each spacer it different . Bought extra 5/16” x 2 3/4 “. There is a certain order to move and put back together but I’ve ran out of time, maybe later, say October 23 .

Good review- one note: I noticed your hitch stabilizers aren't mounted properly. The straight pieces cover the car's hitch - the angled ends rotate onto the bike hitch tubes - prevents some lateral movement.

you can get a dual hitch extender from HF to raise the height of the hitch by 3-4 inches

That's compressed way to much. Get a fork brace and just have it evenly tightened left to right and front to back.

You have that bike cinched down… you compressed the front forks WAY to much. Get some soft loop cambuckle motorcycle tie downs that are motorcycle specific. Also get a forkguard/suspension brace. Don’t compress so much and get the right tools to secure the bike.

Flip both those forward tabs up, and bend them up. Looked like you had already done that to the left one.

Man, you’ve got a lot more faith in that thing than I ever will

Great video, even greater bike!

The stabilizer pieces are mounted incorrectly

What if any tongue weight concerns did you have with the Outback

Useful. Thanks for sharing.

What is the link on amazon to attach on the forks I believe? Thanks!

You skipped over the only part I wanted to see. How easy it was to load the bike.

Did you happen to utilize or require a hitch extender?

Get you a thicker piece of velcro and use it to keep the ramp from popping off???? Does this carrier come with the stabilizer things? I bought one off FB and didn't get them from the guy. Thanks!

I have toyota rav4 and I am hesitant to have this kind of set up since my car just have 200lb tounge weight capacity. How is your outback doing now? No any issues?

I wanna pick one up for my Taco. I'm too short to load my Husky by myself. It's pretty embarassing. XD

Ehhh I'm torn on this....kinda sketchy....I might just use my bike trailer. But these carriers are pretty tempting.

RIP fork seals

Could you please give me the correct spelling of “Kenyon denser”.

installed stabilizer wrong

Canyon dancer ???? hooks to hold straps at Lowes. Please clarify the actual name of the hooks. Thank you

Will this good for a sedan? I have grom.

Hi handsome. Great channel. Please make sure your anti raddle is installed correctly. Please re read the instruction manual. Please use Shock Straps to secure your moto. Please make sure you invest in XRP,ADA,XLM,BTC,FET,MATIC & XDC. GOD BLESS YOU

Should not have the fork so compressed. Get a fork brace