Haynes 188: Hardest Material to CNC Machine?

Просмотров 116 тыс.

% 2 482

CNC machining superalloys can be extremely difficult… and Breaking Tools is Expensive. But, When you Master Machining Hard Materials… You can make Insane Money. Here we show you how to machine Haynes 188 on the DN Solutions Puma tt2100syyb using Kennametal tooling.
Haynes 188 is a type of nickel-chromium-cobalt superalloy, often used in high-temperature environments due to its excellent high-temperature strength, oxidation resistance, and fabric-ability.
Buy the tooling used in this video here:
titansofcnc.com
0:00 What is Haynes 188
1:34 Rough and Face the OD
2:55 Drilling Haynes 188
3:48 Finishing the Face
5:03 Threading the OD
5:40 Inspecting the Threads
6:57 Finishing the ID
7:45 Parting off Haynes 188
8:27 Roughing and Facing the OD
10:18 Roughing the ID
11:05 Roughing the Undercut and finishing op 2
13:06 Adding Threads
14:38 Completed Haynes 188 Part
Subscribe to our podcast channel:
@titansofcncpodcast
#Machining #Machinist #Engineering

Наука

Опубликовано:

25 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 316

@paullaurencesweeney5255 Месяц назад

One of the clearest - speaking presenters on any didactic video on RU-vid. Very clear and easy to follow step-by-step explanations too. Excellent work!

@jeremycarroll2319 Месяц назад

He did do a great job.

@stephenmarkovic878 2 месяца назад

I know you don’t work in automotive, but I would love to see some H 13 tool steel heat treated between 42 to 44. I’d like to see your feeds and speeds.

@rolandtamaccio3285 2 месяца назад

What Rockwell is the H 13 in a completely annealed state ,,, ?

@HeatStroke15 2 месяца назад

Agreed. While EDM and pre-heat treat content are great content when building tools, a lot of us spend most of our time repairing dies and molds. Always looking for tips.

@dadobojanic 2 месяца назад

@@rolandtamaccio3285I think it should be around 30-35hrc.

@ipadize 2 месяца назад

or a mold core made from SPM450V @ HRC58+ hardened all the way through

@anon_usa4209 2 месяца назад

H13 usually runs between 44-50hrc after heat treat and draw backs if I remember correctly.

@jonbaker3728 2 месяца назад

You guys do great videos of some of the most modern, heavy accurate equipment available. You need to do a video for those of us running a clapped out Fadal or a Sharp 2414.

@genesisprecisionllc4331 2 месяца назад

Loved the mention of the ring gage along with the thread mic check or over wires check!

@verakoo6187 2 месяца назад

Yeah it's always better, but not all shops have access to a gauge for every thread type, even worse if ur doing custom threads and no gauge exists lol

@Sara-TOC 2 месяца назад

Great video, Travis! Nitronic 60 was the most "unique" material I've worked with personally. It's always a treat to see the team work with materials that the community may not have encountered before. I'm looking forward to future content!

@jkotsovolos 2 месяца назад

One of the best videos I have ever seen. Also the conclusion that Haynes 188 is one of the materials that makes our world, modern, EXCELENT. Thank you and godspeed.

@wendull811 2 месяца назад

I've found when working with super alloys is they will tell you what to cut at. If you try and push them you will start breaking things. Low and slow with tons of coolant. The worse thing is when you case harden them.

@joseoropeza8495 2 месяца назад

You are the most complete machinist I have ever seen great video Thank you for sharing that valuable information.

@opendstudio7141 2 месяца назад

The most frustrating metal encountered in my aerospace career was pure nickel. Many parts on the order and took an inordinate amount of time and tweaking to complete.

@dickgoesinya4773 2 месяца назад

I imagine probably very gummy and sticky

@m4rvinmartian 2 месяца назад

Interesting. Why was it difficult? Nickel is soft.

@opendstudio7141 2 месяца назад

@@m4rvinmartian Exactly. Small bore tight tolerance holes that had to be cold worked to final spec.

@Industry-insider 2 месяца назад

I think copper is worse

@vinaybhardwaj3224 2 месяца назад

Turning/facing of pure nickle is not difficult. Slow speed and good coolant accomplishes the job with very good surface finish. However, threading on Nickle is difficult. Threads often get damage in first iteration. But with some adjustments, threading is also doable on nickle.

@lvxleather 2 месяца назад

That's one metal I haven't had to machine yet.

@nathanbieri7060 2 месяца назад

That's some Tough material! Way to go Travis!

@StreuB1 2 месяца назад

Really great video and A+++ on covering proper thread measurement and gauging. So many people take it for granted it seems, even designers!

@up9709 2 месяца назад

This video was super informative and very clear about each step need more like this 👍 maybe do a video on Royalloy want to see how it holds up and what you guys think

@Narashimai 2 месяца назад

Wanna see Titans use Diamond/cBN tools at crazy speed!

@derekschommer1465 2 месяца назад

Think those are very niche tools for specific finishes or holding super tight tolerances and most companies probably don’t want their most expensive and critical parts displayed on the internet.

@christopherleubner6633 2 месяца назад

Those are good for hard alloys but don't fare too well on tough alloys, high nickel alloys will eat a PCD bit for lunch that could do fine machining stellite or carbide. CBN will machine almost anything but gets gummed up badly on aluminum and copper alloys.

@booberry6715 2 месяца назад

Damn. Even the sound of that rough cut sends shivers down your spine. lol!

@duryeal26 2 месяца назад

Thanks for including the drawing. That was cool to see.

@bmorlok84 2 месяца назад

Is it harder than Stellite? I machined valves for huge steam turbines with that stuff.. eats carbide. Best results we found was using a negative rake angle on our carbide. And this was all conventional machining. 👌 love these videos

@christopherleubner6633 2 месяца назад

Softer then stellite but it can work harden ridiculously quickly. Go low and slow and the super alloy family will do what you want, definitely goldilocks not too fast or it will eat your bits for breakfast, not too slow or it will eat them for lunch just right. Stellite can be machined with boron nitride or silicon nitride, but generally is a little left of carbide in hardness. Mostly did stuff that was cased with that like guide rails and such.Grinding is the go to with that stuff to be sure.😮

@joejoejoejoejoejoe4391 2 месяца назад

Zirconia sand is quite hard, as you can discover machining sandy castings.

@kahvac 2 месяца назад

I'm nervous having coffee while you machine it !

@flikflak24 2 месяца назад

I remember hearing that the first rocket engine with interpreted cooling channels ( and not braced) was also a super copper alloy ( where it was then up into nickel plating for weeks/month non stop since they had to plate a 1 inch thick nickel layer ) My least fav material is those plastic that have extreme thermal expansion where you can't use cooling on

@christopherleubner6633 2 месяца назад

Plating a 1 inch thick nickel layer sounds extremely time consuming and difficult to say the least. The copper alloy used for rocket engines is usually a mixture of copper nickel and a few percent beryllium. It's unbelievably difficult to work with as the chips don't like to break and are very springy and it likes to work harden very quickly as well.

@flikflak24 2 месяца назад

@@christopherleubner6633 well nasa did do that 1 ince thick plating many many years ago ( cause there wasnt any other way back then. no 3d printing. no cnn and curved drills dont really work that well ) so they had to manually machone the part. make the slots as well. fill them with a condoctive wax and then plate the whole thing in a later of nickel about 1.1 ince and them use that 0.1 ince to hit there tarket as close to perfect as possibly allowed by the laws of nature and technoligy/metherds at the time

@the_blueraja5941 2 месяца назад

THIS IS THE TYPE OF VIDEO WE LIKE.

@Ixnay-Mike 2 месяца назад

Tip for the Titan CNC team: You should take a look at and test the Kyocera cutting inserts. I was able to solve incredible problems with some cutting inserts and special chip breakers (there are many different ones available). Their PV730 Cermet cutting inserts are also incredible in terms of durability.

@grahamkeegan2706 2 месяца назад

I have had the (mis)fortune of machining many different super alloys over my 40 years in machining. Stellite, molybdenum, rhodium etc became run of the mill. One alloy above all other stood out for me - Nimonic 90. It earned the nickname "Unachievium" Now if you demonstrated machining that, i feel you would have nothing left to prove. Granted, these days there is a far better science behind carbide and ceramics than when i last got a job made from that hell-spawned godforsaken material, but it still remains a material that defeated everyone i worked with. I never hear a machinist mention that material without a huge string of expletives in the same sentence.

@opendstudio7141 2 месяца назад

@@grahamkeegan2706 my guess is vectored thrust components on high performance military applications.

@grahamkeegan2706 2 месяца назад

@@opendstudio7141 not sure but had to sign NDA's left right and center on the packages.

@opendstudio7141 2 месяца назад

@@grahamkeegan2706 that’s the way it was during the development the B2 Stealth Bombers also.

@matt8474 2 месяца назад

I would love to hear how you dance around export compliance with DOD and Commerce. Appears right on the edge....

@Lwimmermastermetalart 2 месяца назад

Appreciate you and all your skills. However you have the best of the best of everything in that shop. You’re not old enough to have had to do stuff like that years ago with no CAD/CAM or state of the art machines, not to mention carbide inserts. Hell back in the late 60’s everything was negative rake inserts. Insert technology has come a LONG way since then. Not taking anything away from you though. The only thing I noticed was you said you drilled a 2 inch hole. I’m thinking you meant 2 in depth because the diameter was certainly less. The fact that you gave us all that info is aces man, you’re certainly one of the best in the industry. Could have used you years back in my shop for certain. 👍🏼👍🏼

@ianmyott7827 2 месяца назад

These big pumas are so stronge. Have a few at work and they are incredible.

@danielczoller3395 2 месяца назад

My most “hardest” material was CPM10V… with 32 years old machine.

@opendstudio7141 2 месяца назад

@@danielczoller3395 yeah! Vanadium alloyed tool steels can be a bear. Lots of messy oily stinky coolant is all you can do if machining large drop hammer dies.

@jacobacostamasterscribe2200 2 месяца назад

Heat treated high alloy CPM steel is no joke. Most of the Ellison guys I talk to think 45hrc is hard. I imagine a video on 10v or something like CPM rex 121 at 70hrc is a video that would be..in development for a while

@Samvip00 2 месяца назад

I would love to see you guys perform machining Ops for Printed parts like H214, Inco 718, ti64. Stuff like that!

@PhongNguyen-ud3cq 2 месяца назад

You should try to machine Waspaloy!

@Bhennessy33 2 месяца назад

I forge wasp, and it's a nightmare!

@sameasone21 2 месяца назад

I've heard stories, and I'd rather not.

@markdavis304 2 месяца назад

Great info Travis. Well done👍

@donniehinske 2 месяца назад

Good info Travis!

@PerezAutomated 2 месяца назад

A little birdy in the industry told us Eurotech might go thru the door??? Hybrid between Swiss and turn? If true that's exciting!!

@kingofherdaz 2 месяца назад

You made it look easy 🤷‍♂️

@stefan3008 2 месяца назад

Im seeing all your Highly Professional and Satisfying videos, but wouldnt it be nice to have a Video for People that dont know about any of these things? Maybe about how the Machines work with all axis, the basis of a Programm, how the machines measure the distance and how they are so precise.

@Tacomaguy458 2 месяца назад

Id like to throw out a challenge for yall. We just landed some contract work where we are going to be machining a ton of TZM material with 1/8" endmills for most of the toolpaths. I had never even heard of that material and even our tool reps had no idea what we should use to cut it. We are going to get some blanks in by the end of the week and probably going to be making some cuts at the start of next week but I would be curious to hear what you guys would use to machine it. Our process is going to be a bit of lathe work to face and profile a shallow boss on the back side then put in the mill to machine the grid on the face. This material from what I understand is basically like trying to machine a carbide insert. Super abrasive and going to be a nightmare to do but it opens the door for a TON of work into our shop. Cheers fellas!

@jeremymatthies726 2 месяца назад

Travis, awesome job with this alloy. I am curious though, what else does super alloys like this get used for besides for high temp turbine and/or rocket engines?

@travisjarrett2355 2 месяца назад

It depends on the material but you will also see them used in highly corrosive environments, for example chemical processing plants.

@SevalleLXI 2 месяца назад

I'd like to see what it would take to make a detailed, three-dimensional wax stamp out of titanium. Would be a really good display of skill and tooling to see what kind of delicate work can be done at that small scale.

@hinz1 2 месяца назад

Those chips certainly would make some nice forge welding patterns ;-D

@stevelush9994 2 месяца назад

Travis what a brilliant video an articulate concise description of everything involved. What was the reason for tapering the cuts early in the video is it to reduce harmonics or to change the tool load perhaps?

@travisjarrett2355 2 месяца назад

The intention is to prevent notch wear. Notch wear is when you develop a chip on your insert because you enter the cut at the same point every pass. The taper is really just a way to alternate this entry point point slightly and thus increase your tool life. It is usually referred to as a variable depth of cut.

@MrChevelle83 2 месяца назад

i was just thinking about this issue today at work! we only use ceramic inserts and our heavy roughing cuts are all the same doc which has this issue and shortens the cutter life. but i aint sure if our older lathes are still rigid enough to handle this style programming.

@AntalopeAUT 2 месяца назад

36+ % Cobalt, 22 % Nickel, 22% Chrome, 14.5% Wolfram/Tungsten , throw in a bit of Carbon, Silicium, Lanthan, Boron, Magnesium and a measly 3% of Iron and you´re basically asking : "HOW HARD& BAD TO MACHINE DO YOU WANT YOUR STUFF ? " "YUSSSSSS ! " kekeke

@garbo8962 2 месяца назад

Glad to see somebody other then the young talented machnists who pats himself on the back and over hypes everything.

@HansMouthaan 2 месяца назад

Nice video and a good teacher, thanks.

@supremecommander2398 2 месяца назад

@TITANSofCNC a bit off-topic, but you often talk about mirror finish and such, but i haven't seen you using a Parabolic Performance Cutting mill (aka a barrel mill) for two years. are those out of date now?

@shaniegust1225 2 месяца назад

Great video Travis!

@brianropel 2 месяца назад

I got to make some electrical components out of a material called Rhodium. You guys should play with some of that stuff. The part I made was basically a fancy bolt that would carry the current through it. But it was crazy thin walled. I can’t remember the exact dimensions because the thread pitch was a customer custom made pitch, but I remember it was around an M54 in size comparison. And the wall to the outside of the part was only .070 thick. I made the part to like 90% complete in my first vise on the table. Second vise I made a fixture that the part would screw onto so I could deck the top of the bolt without dealing with pressure on the thin walls.

@punkdudex69 2 месяца назад

Rhodium is really tough, and it's dirty step cousin rhenium. Turning it was successful 80rpm .004ipr and heating the material to around 1100 degrees fahrenheit before engagement... Also deep cut and sharp relief angles with a dmng

@christopherleubner6633 2 месяца назад

Sounds like the plasma injector for an ion etching machine used for semiconductor processing. Usually it is a platinum rhodium alloy of about 85% platinum and 15% rhodium. The plasma for etch is 98% neon and 2% fluorine. Really dont have a wide choice of metals when using that. 😂.

@brianropel 2 месяца назад

@@christopherleubner6633 it could have been. Some other parts I made for the same company I know go to microscopes. They kinda deal with a lot of weird odds and ends stuff.

@bookwurm99 2 месяца назад

Inconel 718, udimet, and Mar m 247 are fun to both turn and grind. These days I just grind inconel and the Mar m. Mar m is 20% tungsten carbide

@u.e.u.e. 2 месяца назад

I think you made this part for your garden - a nice and shiny connection of a gardenhose to a faucet! 😂

@diGritz1 2 месяца назад

I remember back in the late 80's a guy walked in and to the shop and hands us some parts and a print. The print was just a holding fixture and the parts, 6 in total. They were shaped like a house roof line seen end on. They wanted a fixture to hold the parts down on a huge belt sander. When asked why a belt sander he pulled out a 7th that looked scored up. He said try and machine it and you'll know. We tried and failed as well. He couldn't even tell us what it was or the Rockwell hardness. He said, and I quote, "It's too hard to measure". We were far too worried that the fixture wouldn't hold the parts down and anyone near the machine would be turned to canon fodder so took a pass.

@user-Human-777 2 месяца назад

Respekt!!! Thank you for the video!!!

@seventimesman4034 2 месяца назад

I wish more people who are not familiar with machining would watch these videos to see just how nerve-racking this work can be. Also, how much goes into this type of work.

@ericsandberg3167 2 месяца назад

When I heard that high pitched whine from the cut you were making, it reminded me of cutting beryllium.....sounds like your cutting glass on some ops.

@christopherleubner6633 2 месяца назад

Beryllium is awful to machine, I don't envy you.😂

@some-random-idiot6853 2 месяца назад

Making me feel better about my kovar job rn

@robertpatrick3350 2 месяца назад

A history of the super alloys would be interesting, their genesis and impact….. particularly the allied jet engines and how the technology gap impact the German jet program.

@AquaMarine1000 2 месяца назад

An excellent presentation.

@peterwilliams211 2 месяца назад

Try Monel with HSS tools on manual machines. Now that's difficult.

@vinaybhardwaj3224 2 месяца назад

Yes. K-Monel is the most difficult to machine material which I have encountered. However, using special Carbide Inserts of "Walter" make made it possible for me.

@brokentoedspoon 2 месяца назад

I like this guy... Doesn't say BOOOM! every second word...haha🤣

@PasqualeMieleJr-ox5rf 2 месяца назад

I like watching people machine stuff to make things

@brianropel 2 месяца назад

Potentially stupid question, but I think I have logic behind my thought to it. Would this material thread easier if you hadn’t already drilled the ID out first? It’s a habit for me because it’s how I was trained. But my teacher told me to keep my part as ridged as I could when doing an OD thread to help avoid the deflection that’s causing that taper your seeing. My teacher has been working in the industry for 48 years. And I kind of just took his word for fact. What are your thoughts??

@travisjarrett2355 2 месяца назад

No there is some truth to that and if you are getting say chatter in your threads that may be a good solution. For me I sometimes worry if I cut my threads to size and then remove a bunch of material from the inside my thread may expand. On this particular size thread and hole probably tomato tomatto. In other circumstances though one technique might be preferred over the other.

@RalaarDev Месяц назад

Would love to see you machine some isothermally forged and heat treated Rene88DT and ME16.

@georgecooke9010 Месяц назад

FEED AND SPEED. WHERE DID I HEAR THAT BEFORE? 🤔🤔🤔👍👍👍

@stellingbanjodude 2 месяца назад

Try bronze aluminum, I always enjoyed machining it. It reminded me of gold.

@verakoo6187 2 месяца назад

I'd be interesting in seeing ya'll run some Phelonic Natural it's a very interesting wood like material. Not sure what u'd make out of it, but if u do be prepared for a mess lol

@Alex-yq2tf Месяц назад

That stuff has a wicked squealing sound! Insane stuff

@ytfan3815 2 месяца назад

Travis, drills have no feed per tooth (3:30), .... all specs are Feed/Rev even for insert (U) drills but I assume you'll know because calculations seems okay. Is it a Mastercam thing ? 😉

@travisjarrett2355 2 месяца назад

It is a Mastercam thing. The live tool paths are programmed like they would be in a mill, hence the IPT. If it were an insert drill it would be programmed with the customary lathe IPR.

@ytfan3815 2 месяца назад

@@travisjarrett2355 Okay, thanks 👍, ..... btw nice machine, a bit complicated to program when using the full options on double spindles and turrets, ... and robot.😉

@IndependantMind168 Месяц назад

You guys ever try machining Boron Carbide?? It's pretty tough to machine! It's not CBN but it will give diamond tools a run for your money...consider edm 😉

@BennyAndTheJets428 2 месяца назад

I would love to see how you guys would machine tantalum ta-10w.

@1320pass 2 месяца назад

I remember that stuff being really heavy per given size. Cannot remember the machinability. So yeah, bring on some tantalum.

@BennyAndTheJets428 2 месяца назад

⁠⁠⁠⁠⁠@@1320passIt is very heavy! I’d say it’s similar to carbide in weight. The machinability is not great. It reminds me a lot of copper, very gummy and hard on tools. There’s very little information online about Machining it. i’m curious if anyone at Titans has run this stuff before.

@christopherleubner6633 2 месяца назад

Heavy, soft as mild steel but makes stringy chips. Cuts like streight copper. Cut some E beam electrode and target holders from the stuff. Also quite expensive too.

@Autonate_42 2 месяца назад

I know you've done grinding glass before but be interested in seeing if can me machined maybe on the puma or on another machine

@acolorfulmind4383 2 месяца назад

Try your hand with 60 HRC. I worked as a miller in a toolroom in maintenance. Having to machine in tolerances of H/h6 in materials as hard as 60 HRC was hell. We'd use air-cooling and carbide tools of course, but things would break so easily...

@rogerfroud300 2 месяца назад

Buy yourself a piece of Molybdenum and see how you get on. Trust me, nothing destroys tools like it. You measure and set a precise size, and two cuts later it's miles over size because the tool has been eaten away.

@coltonmenconi396 2 месяца назад

A2 tool steel would a joy

@Ryan_Lundy 2 месяца назад

If you want a real challenge try machining some Hardox Extreme. We have made some shear blades out of it and it is brutal to machine.

@firebry23 2 месяца назад

Why would you use the live spindle drill over spinning the Chuck? Is it just because of the machine you're using, or is there a reason for it? Thanks

@travisjarrett2355 2 месяца назад

When I run larger drills I'll run it static (chuck turning) but with smaller drills it is easier (and safer) to run it as a live tool. The live tool usually allows for easier tool holding and if the tool is off slightly from center you will not snap the drill, as it is like a mill at that point.

@melvyntoms8038 2 месяца назад

Did you get any push back when cutting

@markdebruler5886 2 месяца назад

The machine shop I work for will only buy HSS Tooling and we have to use that tooling on everything from low carbon steel, cold rolled steel, 6065 and higher Aluminum, pre and post heat treated steel, all grades of stainless steel and thompson. They will not buy Kobalt or Carbide tooling which makes my job very difficult at times. Would love to see a video using only HSS tooling for such materials with advice.

@Tabacish 2 месяца назад

What? Why? Are they stuck in the fifties?

@markdebruler5886 2 месяца назад

Yes they are, the owner is 92 years old and still operates this shop as if it were 1950

@Tabacish 2 месяца назад

@@markdebruler5886 Well, HSS development died when WCo inserts were invented, so your options are limited...

@elliotwilliams7523 2 месяца назад

Can you do a video machining magnesium metal? It’s difficult to machine because it can catch on fire pretty easily.

@RMOR_KNIVES 2 месяца назад

MagnaCut knife steel. Hardened at 65hrc. Use small bits 1/8 and 5/32. I'd be interested in how far you can push it

@Jack_Rabbit71 2 месяца назад

I wish to never see this alloy. 🤔 But i'm glad you did just to hear it cutting. It would be great to see you put spinning glass view ports on your machines. Be a good idea for your machinists and us viewers. Why not publish the Rpm on all of these tools?

@Vankel83 2 месяца назад

On the first side that roughing cut sounded like hell. Still, it didn't look too bad when you showed it.

@nickjones8335 2 месяца назад

I would love too see Alumina machined. Always wanted parts because of the combo of thermal conduction and electrical insulation, but they have always been to expensive in comparison to the benefit they provided.

@vinaybhardwaj3224 2 месяца назад

Alumina is ceramic material. It is very hard. However, it can be turned on CNC lathes using PCD (Polycrystalline Diamond) inserts.

@danielhertz7266 2 месяца назад

How did you grab the finished thread without damaging it?

@nilsEKH 2 месяца назад

Awesome Video ! That's high quality machnining education. Great work Travis. My toughest companion, which work a lot these days is Hasteloy 2.4602. Always fun and nasty to machnine ^^ But If you know how, it's just cool:)

@mobilePCreviews 2 месяца назад

Have you guys tried using rainx of something similar to cover the camera cases? Might make it alot easier to see when running coolant

@gregleblond9367 2 месяца назад

Idk it you could get your hands on it. But GRX-810 would be dope to see milled or something else done with it if it has to be metal printed

@tj9382 2 месяца назад

Great job. But that’s one part dialled in and inspected. Now let’s say you have a production run of 50 parts. What’s the approach concerning checking and keeping tabs on accuracy with such a difficult material please?

@css46290 2 месяца назад

P20, H13 and S7. Give the mold makers some love on the channel.

@hectordominguez7143 2 месяца назад

I'd like to see some more plastics like HDPE and UHWM.

@vinaybhardwaj3224 2 месяца назад

HDPE is easily machinable. But it deforms after machining. Trick is to do roughing and allow the material to season for 24 hours before taking finishing cut.

@elshaweish Месяц назад

Machining all Haynes materials today is much easier from 50-40 years ago with all modern CNC and tools. It wasn't easy cutting with tools available back than.

@SnapTalesJunction 12 дней назад

Would love to see you guys turn some Stellite

@gnicke57 2 месяца назад

N2 is another aerospace super alloy I'd like to see you try out. I work with that and Haynes 188 daily.

@trevorhall9403 2 месяца назад

Try hastelloy or Thompson shafting or if you want something that's incredibly heavy try tungaloy.

@eddiedante3356 2 месяца назад

Inconel! Could y’all make a video about cutting Inconel!

@stiles3711 2 месяца назад

Which alloy? 625 718 are pretty similar but 925 is another step in the pain in the ass direction.

@ColbyMitchell 2 месяца назад

I work with molybdenum. Tough stuff. Would love to see how you do it

@regaladosuarezguillermo7345 2 месяца назад

Otro dato de los ring gages, es que te sirve para ver si tu rosca rompe o no. Saludos

@gogelgebenec5270 2 месяца назад

Die Arbeitsschritte wurden sehr gut erklärt! Meine Frage dazu. Wie groß ist die Standzeit der Werkzeuge in gefertigten Teilen?

@ZoraGraham Месяц назад

Sincerity is the way of Heaven. The attainment of sincerity is the way of men.

@rileyjordan9072 2 месяца назад

At first, I thought you might be Haynes, and this is episode 188. lol

@thomasmeier3073 2 месяца назад

Could you make a Video about Machining POM?

@2SMPerformance Месяц назад

We need a heat treated inconel 718 video

@anthonymartinez9415 2 месяца назад

So when gripping for OP-2 are you holding on the threads? If not are there instances where you absolutely have to ? What’s a good way to avoid thread damage ?