ABOUT THIS VEDIO
A double signal (hazard) light set for a motorbike typically consists of two bright flashing lights mounted on the front and rear of the bike. These lights are used to indicate that the motorbike is in a hazardous situation or has stopped in an unexpected place, alerting other road users to exercise caution. Here's a basic description:Front Hazard Light: This is a high-intensity flashing light located at the front of the motorbike. It emits a bright amber or white light and is typically mounted near the headlamp or handlebars.Rear Hazard Light: The rear hazard light is located at the back of the motorbike. It also emits a bright amber or red flashing light and is usually mounted near the tail light or license plate.Activation Switch: There is a switch or button on the bike's handlebars that allows the rider to activate the hazard lights. When pressed, both the front and rear lights will flash simultaneously.Flashing Pattern: The hazard lights typically flash simultaneously in a distinctive pattern, such as a double flash or alternating pattern, to grab the attention of other drivers.Purpose: Hazard lights are used in situations such as a breakdown, accident, or when the bike is stopped on the side of the road due to an emergency. They signal to other motorists that there is a potential hazard ahead, prompting them to slow down and proceed with caution.Visibility: These lights are designed to be highly visible, even in adverse weather conditions. They help enhance the visibility of the motorbike, reducing the risk of accidents in hazardous situations.Please note that the specific design and features of hazard light sets may vary between different motorbike models and manufacturers, but this description provides a general overview of what you can expect from a double signal (hazard) light set for a motorbike.
double signal light installation bike,led indicator,bicycle,led turn signal,led,ebike singapore
6 сен 2024
