the best themed inventory (it's not what you think)... one of the weirder csgo inventories and csgo skins collections discussing csgo skins: / ohnepixel
So, story begins long time ago… in 2015 when I played bets on csgo lounge and made my way up to Dlore (was the time of Ibuypower ban and 322 matches, but I was not involved in any, there were wins and loses). Then after holding it for few years hard times came and I had to sell it. But eventually everything went well, so I decided to get that back. It was 2021, so long time… And after 2 years not seeing it, I found a guy, who knew the Chinese guy, who’s friend was holding it… so I had to find a middle man who speaks Chinese to make a trade. So when I got my baby back, I was like… F it, I’m making an inventory around that skin on reverse 322 float 0.223. It had a lot of meeting to me and it still is… I just loved the colors of blue and red, really matches well withCT and T sides, so I had to dedicate myself to make a fire and ice inventory around it. Simple explanation that I usually say to people is that I was 22 when I started collecting that loadout, but now I’m 23, so 223… but the Dlor story is the only true one) I don’t think that people really do things like that nowadays, but I collected a reverse 322 loadout. But the BBC thing… people are crazy, idk why someone had that thing in mind, but look…. Any marketing is good marketing) and not gonna lie, did not want to destroy all the fun with the BBC, it’s still nice.
The .223 Remington (designated as the 223 Remington by the SAAMI[3] and 223 Rem by the CIP[4]) is a rimless, bottlenecked rifle cartridge. It was developed in 1957 by Remington Arms and Fairchild Industries for the U.S. Continental Army Command of the United States Army as part of a project to create a small-caliber, high-velocity firearm. The .223 Remington is considered one of the most popular common use cartridges and is currently used by a wide range of semi-automatic and manual-action rifles as well as handguns. In the U.S. Army, the cartridge is referred to as "Cartridge, 5.56 mm ball M193." The 5.56×45mm NATO was also developed from the 223 Remington.[5] The development of the cartridge, which eventually became the .223 Remington, was linked to the development of a new lightweight combat rifle. The cartridge and rifle were developed by Fairchild Industries, Remington Arms, and several engineers working toward a goal developed by U.S. Continental Army Command (CONARC). Development began in 1957. A project to create a small-caliber, high-velocity (SCHV) firearm was created. Eugene Stoner of ArmaLite was also invited to scale down the AR-10 (7.62×51mm NATO) design.[6] Winchester was also invited to participate.[7][5] CONARC ordered rifles to test. Stoner and Sierra Bullet's Frank Snow began work on the .222 Remington cartridge. Using a ballistic calculator, they determined that a 55-grain bullet would have to be fired at 3,300 ft/s to achieve the 500-yard performance necessary.[5] Robert Hutton (technical editor of Guns and Ammo magazine) started the development of a powder load to reach the 3,300 ft/s goal. He used DuPont IMR4198, IMR3031, and an Olin powder to work up loads. Testing was done with a Remington 722 rifle with a 22" Apex barrel. During a public demonstration, the round successfully penetrated the US steel helmet as required, but testing also showed chamber pressures to be too high.[7][5] Stoner contacted both Winchester and Remington about increasing the case capacity. Remington created a larger cartridge called the .222 Special. This cartridge is loaded with DuPont IMR4475 powder.[5] During parallel testing of the T44E4 (future M14) and the ArmaLite AR-15 in 1958, the T44E4 experienced 16 failures per 1,000 rounds fired compared to 6.1 for the ArmaLite AR-15.[5] Because of several different .222 caliber cartridges that were being developed for the SCHV project, the .222 Special was renamed .223 Remington. In May 1959, a report was produced stating that five- to seven-man squads armed with ArmaLite AR-15 rifles have a higher hit probability than 11-man squads armed with the M-14 rifle. At an Independence Day picnic, Air Force General Curtis Le May tested the ArmaLite AR-15 and was very impressed with it. He ordered a number of them to replace M2 carbines that were in use by the Air Force. In November of that year, testing at Aberdeen Proving Ground showed the ArmaLite AR-15 failure rate had declined to 2.5/1,000, resulting in the ArmaLite AR-15 being approved for more extensive trials.[5] In 1961, marksmanship testing compared the AR-15 and M-14; 43% of ArmaLite AR-15 shooters achieved Expert, while only 22% of M-14 rifle shooters did. Le May ordered 80,000 rifles.[5] In July 1962, operational testing ended with a recommendation for adoption of the ArmaLite AR-15 rifle chambered in .223 Remington.[5] In September 1963, the .223 Remington cartridge was officially accepted and named "Cartridge, 5.56 mm ball, M193". The following year, the ArmaLite AR-15 was adopted by the United States Army as the M16 rifle and it would later become the standard U.S. military rifle. The specification included a Remington-designed bullet and the use of IMR4475 powder, which resulted in a muzzle velocity of 3,250 ft/s and a chamber pressure of 52,000 psi.[5] In the spring of 1962, Remington submitted the specifications of the .223 Remington to the Sporting Arms and Ammunition Manufacturers' Institute (SAAMI). In December 1963, Remington introduced its first rifle chambered for .223 Remington a Model 760 rifle.[7]
AMAZING inventory. Im working on something similar, but where half the guns are black, and the others are white. But i dont think i can get this level of presentation Hahaha
Hey guys the inventory owner is a friend of mine He told me that 2/23 is the date he and his wife got married in 1995. Their honeymoon was always the happiest day of the year for him. Sadly 10 years later on the day 2/23 his wife passed away :[ he asked me to please reblog to support fake emotional stories
They make so much money off skins, they wouldnt do that, it ruins it for themselves. If there was a new cs, the skins would port over I think. Valve would be very stupid to destroy the market. No one would ever trust them again