Тёмный

Headlight Removal and Refitting - Peugeot 206 

ScrewsNutsAndBolts
Подписаться 116 тыс.
Просмотров 101 тыс.
50% 1

A step by step guide on how to remove and replace the headlight units on a 2002 to 2009 Peugeot 206. The part number for the left headlight is 9630869780 and for the right side its 9630869680. Some of these plastic clips and rivets are quite fragile and easily broken so be careful as you remove them. Thanks for watching. Please comment, like and subscribe !.
All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
© / screwsnutsandbolts 2022
Read important information below:
Disclaimer
Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts.

Авто/Мото

Опубликовано:

 

29 янв 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 54   
@HaveIDyslexia12
@HaveIDyslexia12 2 года назад
I don't even have a 206 and I still love watching these.
@screwsnutsandbolts
@screwsnutsandbolts 2 года назад
Thanks very much !
@user-ek4tv8pf8v
@user-ek4tv8pf8v 10 месяцев назад
This is the best guide that I have seen - so well thought out and time taken to make it so clear. Well done.
@screwsnutsandbolts
@screwsnutsandbolts 10 месяцев назад
Thank you !
@maad33
@maad33 11 месяцев назад
Thank you very much! With this video i could clean my headlight.
@screwsnutsandbolts
@screwsnutsandbolts 11 месяцев назад
You're welcome !
@s2504s
@s2504s 9 месяцев назад
Thanks, man! You are the BEST! You saved my day
@screwsnutsandbolts
@screwsnutsandbolts 9 месяцев назад
You are welcome!
@lola__dr3618
@lola__dr3618 6 месяцев назад
this video helped me massively thank you !
@screwsnutsandbolts
@screwsnutsandbolts 6 месяцев назад
You're very welcome, thanks for watching !
@zbirmohmed7868
@zbirmohmed7868 2 года назад
Très bon travail .chapeau bas
@screwsnutsandbolts
@screwsnutsandbolts 2 года назад
Thank you !
@dorianmanto7513
@dorianmanto7513 Год назад
Man that is a wonderful guide! Takes a lot of time for your to create it. But it is very detailed and helpful. Greetings from Czech Republic:)
@screwsnutsandbolts
@screwsnutsandbolts Год назад
Thanks for watching ! :)
@juaneduardopelazo4861
@juaneduardopelazo4861 9 дней назад
very good , thank you
@screwsnutsandbolts
@screwsnutsandbolts 9 дней назад
You're welcome !
@StromboliKicks
@StromboliKicks 2 года назад
Thank you so much for these videos. I hope you do something about the clutch in the future. Mine is feeling a bit "sticky" when I lift the foot.
@screwsnutsandbolts
@screwsnutsandbolts 2 года назад
I might not get to the clutch I'm afraid. I'll let you know if I do
@jacek-jan
@jacek-jan Год назад
FINALLY! In some cases there is not enough place to replace left H7
@jmsilvagm
@jmsilvagm 9 месяцев назад
EXCELENT, great video.
@screwsnutsandbolts
@screwsnutsandbolts 9 месяцев назад
Thank you !
@Gogata1964
@Gogata1964 2 года назад
Перфектна работа!👍
@screwsnutsandbolts
@screwsnutsandbolts 2 года назад
Thank you very much !
@markwilliams2830
@markwilliams2830 2 года назад
Phew! Got there in the end what a faff just to do this ? Why do the French make what should be a simple job so long winded ?With this job I would keep a supply of Trim Clips, and an old soldering iron handy in case I have to do a bit of Plastic Welding to any plastic I break ! Any way a great detailed description .Thanks
@screwsnutsandbolts
@screwsnutsandbolts 2 года назад
Thanks very much. Yeah I'm not actually sure why I bought a Peugeot again lol
@raulanayagonzales2497
@raulanayagonzales2497 7 месяцев назад
Gracias por el toturial es de mucha ayuda! Gracias saludos .
@screwsnutsandbolts
@screwsnutsandbolts 7 месяцев назад
You're welcome !
@bretagnebartouxxx5394
@bretagnebartouxxx5394 Год назад
Thanks ❤
@screwsnutsandbolts
@screwsnutsandbolts Год назад
You're welcome 😊
@Alex-vh5og
@Alex-vh5og 15 дней назад
Thanks for the video, it’s really helpful! I’m going to do this procedure tomorrow. How long do you estimate the time this procedure will take?
@screwsnutsandbolts
@screwsnutsandbolts 14 дней назад
14 minutes and 28 seconds.....lol. It's hard to say. You should be able to do it in an hour or under.
@archiblanco
@archiblanco 10 месяцев назад
Hello, very good video... luxury!... I have a Peugeot 206 1.9 diesel 2008, is it compatible with everything indicated?
@screwsnutsandbolts
@screwsnutsandbolts 10 месяцев назад
Thanks, it should be similar
@rasoolnaderyan2745
@rasoolnaderyan2745 9 месяцев назад
❤❤❤❤❤
@screwsnutsandbolts
@screwsnutsandbolts 9 месяцев назад
Thanks !
@gasgaspenguin1766
@gasgaspenguin1766 Год назад
👌
@screwsnutsandbolts
@screwsnutsandbolts Год назад
Thanks !
@Lepiratespagnol
@Lepiratespagnol 2 месяца назад
👌👍👏👏👏
@screwsnutsandbolts
@screwsnutsandbolts 2 месяца назад
Thanks !
@ThunderSky
@ThunderSky Год назад
Hello, may I ask how to align the headlights on Peugeot 206? I can't find a good video showing it.
@screwsnutsandbolts
@screwsnutsandbolts Год назад
I don't have the 206 any more, sorry. This might help: asacannes.com/en/comment-regler-les-phares-de-ma-peugeot-206/
@ThunderSky
@ThunderSky Год назад
@@screwsnutsandbolts Thanks
@CrazyTechLab
@CrazyTechLab 5 месяцев назад
Got a really weird issue having replaced both headlight clusters. Neither dipped beam socket is working. Bulbs are fine, tried the old clusters and they no longer work on the dipped beam either. Also not the fuses which have separates for dipped and high beams. Any ideas?
@screwsnutsandbolts
@screwsnutsandbolts 5 месяцев назад
It sounds like a blown fuse. Have you checked the fuses using this link ?. They seem to be in slightly different locations, depending on the year: fuse-box.info/peugeot/peugeot-206-1999-2008-fuses
@CrazyTechLab
@CrazyTechLab 5 месяцев назад
@@screwsnutsandbolts Yeah unfortunately they’re both okay. It’s fuse 9 and 10 for left dipped beam and right dipped beam in the engine compartment fuse box. It’s a minor repair following a front collision so maybe something else is broken.
@CrazyTechLab
@CrazyTechLab 5 месяцев назад
@@screwsnutsandbolts Turns out you need the engine running to have the dipped beams on this model. Problem solved! Thanks for the video
@screwsnutsandbolts
@screwsnutsandbolts 5 месяцев назад
Oh of course, I'm glad one of us figured it out lol :)
@marino6081
@marino6081 2 месяца назад
Does peugeot 206 have headlights made of glass or plastic
@screwsnutsandbolts
@screwsnutsandbolts 2 месяца назад
I would assume they're made of plastic (Polycarbonate)
@SuperONOO
@SuperONOO Месяц назад
Nebolo nd stare auta otvoril si kapotu a všetko si mal ako na dlani
@charlescamellini4182
@charlescamellini4182 2 месяца назад
Dismantle the entire front of the Peugeot 206 to change the headlights? Bible Time!!! No way! Review modern concepts!!! Brazilian method: There are three screws. Just move the mustache away, loosen the screw and two more at the top and be happy!!!
@xXturbo86Xx
@xXturbo86Xx 2 месяца назад
What a terrible design. The 208 is even worse. You have to remove the entire bumper. Meanwhile you can remove the headlights of VWs by unscrewing the top bolts and pulling them out. German engineering can be very simplistic, or very complicated in the case of some BMWs....but French and Italian engineering....so annoying.
@screwsnutsandbolts
@screwsnutsandbolts 2 месяца назад
A lot of manufacturers seem to think it's a good idea to hide the 3rd mounting nut/bolt out of reach behind the bumper. It doesn't make sense.
@Alex-vh5og
@Alex-vh5og 9 дней назад
@@screwsnutsandboltsyesterday I had to take the whole bumper off of a seat just to access the final 2 bolts 💀
Далее
Headlight Bulb Removal and Refitting - Peugeot 206
6:48
Ne jamais regarder une fille à la plage 😂
00:10
Просмотров 766 тыс.
Peugeot 206 Gear Knob and Gaiter Removal and Refitting
4:20
Peugeot 207  front bumper removal
4:29
Просмотров 120 тыс.
Changer un phare avant sur une Peugeot 206
5:44
Просмотров 62 тыс.
Headlight restoration shown in 4 minutes
3:52
Просмотров 683 тыс.
Фишки FORD F-150. Часть 2
0:54
Просмотров 3 млн