You pretty much inspired me to pick up my 03 Sierra yesterday. 260k miles I bought it knowing it needed a trans and I drive it home with it screaming at me the whole time, she made it though. Transfer case issues caused the transmission issues, I wiggled it between neutral drive and 3rd. I can’t wait to get a new trans in it and get it clean as Clifford. It came with most of the options except for sunroof and heated leather seats.
Make sure the wiring harness under the seat is plugged in. A lot of times, folks unplug them if the gear on the slider motor strips out on it (common issue). You can probably plug it back in, get the seat back to the position you like and unplug it again
Man I was originally leaning toward a race truck stance with this now I’m leaning towards a lifted old school look, that red is classic. I think some 17” polished wheels with 35s would be killer!
I love the rear tail lights but I think clear headlights would look better with clear fogs or yellow fogs… Clifford is definitely coming along! LARRY!! Always enjoy the Larry shout outs!!
Looking clean with new heads and tails. DRLs are 2 different color lights need to go all LEDs on the headlights in my opinion. Have you check fuses? Check for voltage underneath seat and/or directly jump seat motor with 12v to test if it really works .
I think clears would look better once the fender flares are removed. Right now, I don't think it really matters. Clifford definitely needs an LED upgrade, especially with the reverse lights in the upgraded taillights. For the fog lights, I'd get new housings that match whichever headlights you decide on. Check the fuse for the power seats.
Look up Matt Paff on RU-vid he has a video that shows on that control panel that the board pops itself out and disconnects from the seat switch...just take the screws out and the black panel could be unlatched.. all you do is pop it back in place and that may fix the slide part... the function for the up and down could be bc the motors have gone out or the connector could just be unplugged from the previous owner
There is 2 motors under your seat, they both are probably in a bine and you need to get a small hammer and hit motors while pressing your seat adjustment buttons. That should get pressure off of motors and seat should move normal. Hope this helps! 🤙🏻
Brand new lights fogging up already? Send it back! Use your voltage tester under the seat if there’s atleast power under there somewhere. Nice name. Clifford, it works. 👍
Hey random question for you! I have a 2015 Jeep WK2 that I want to do some work to. If you wanted to do some content with another vehicle, it's the white jeep with the black altitude package, i will be installing a lift and adding beefy tires. I've been watching you for a while and just moved up to Nashville from bham and my sister and brother in law still live down there around hoover. If you're interested in spotlighting another vehicle, I think it'd be cool to do something like how you did your 22 sierra lift video. Love the stuff, God bless! 👏🙌🙏
Why do the wheels look different on each side of the truck? When it shows the right side the wheels are all blacked out and have the chrome/machines rivets and when you show driver side it looks like it’s has a ridiculous chrome lip around the wheel.
U may have a blowed fuse u der the hood or side panel on driver side for ur seat and u should do the interior swap just for the sake of youtube content
@@reptmon7808 ended up getting true duals 5” tips 2.5” pipe to 2.25” tailpipes because it ended up being to close to the gas tank and the spare tire for the shop to be comfortable letting me leave with it. Not a lot of room to work with on a Tahoe at all but they got it done and glad I went with that setup
You might think it looks super cool with the tires oversizing the wheel Wells while tie is very dangerous a friend of mine got hit by a rock riding a motorcycle knocked him off his motorcycle thankfully he was not injured too badly .