Here’s an in-depth tutorial on how you can fully automate the Jester AI in your DCS missions.
SET COMMAND WITH VALUE 10009
value = 1 disables Jester LANTIRN auto designate
value = 0 enables Jester LANTIRN auto designate (default)
SET COMMAND WITH VALUE 10010
value = 1 silences Jester
value = 0 Jester will talk again (default)
SET COMMAND WITH VALUE 100011
value = 1 disables Jester
value = 0 reactivates Jester (default)
SET COMMAND WITH VALUE 10012
This is a special command with which you can force Jester to track a specific target using unit name. Since SET COMMAND can only accept numerical values between -1 and 1, we use the following rule:
value = 0.01 will track unit named LantirnTarget01
value = 0.02 will track unit named LantirnTarget02 ... value = 0.99 will track unit named LantirnTarget99 value = 1.00 will track unit named LantirnTarget100
value = 0 will resume Jester state to normal operations
SET COMMAND WITH VALUE 10013
Another special command but this time Jester will track zones.
value = 0.01 will track zone named LantirnZone01
value = 0.02 will track zone named LantirnZone02 ...
value = 0.99 will track zone named LantirnZone99 value = 1.00 will track zone named LantirnZone100
value = 0 will resume Jester state to normal operations
Commands 10012 and 10013 are exclusive - when Jester is tracking a unit using command 10012, activating command 10013 will force jester to stop tracking that unit and start tracking a zone, and vice versa.
Using value = 0 in either of the two will stop tracking both units and zones.
10014: Jester will designate manually what is under the lantirn cross.
10015: - tune AN/ARC-182 to a selected channel.
As the value pass: 0.XX where XX is the two-digit channel number
10016 - tune TACAN channel.
The value should be constructed using the following guide:
s0.XXXY, where s is an optional - sign - use negative values for A/A and positive for T/R
XXX is the three-digit channel number (remember about the leading zeroes for channels lower than 100)
Y is 0 for using X-mode, and 1 for using Y-mode.
so: 0.0630 is channel 63X, T/R -0.0081 is channel 8Y, A/A
10017: DEST knob
0.1 - WP1
0.2 - WP2
0.3 - WP3
0.4 - FP
0.5 - IP
0.6 - ST
0.7 - HB
0.8 - MAN
10018: select waypoint to enter coords from a trigger zone (this command does no action in the cockpit)
0.1 - WP1
0.2 - WP2
0.3 - WP3
0.4 - FP
0.5 - IP
0.6 - ST
0.7 - HB
0.8 - MAN
10019: enter coords from trigger zone for the waypoint selected with 10018 (if no selected, WP1)
0.01 - WaypointZone01
0.02 - WaypointZone02
...
0.99 - WaypointZone99
10020: WCS switch
0.1 - OFF
0.2 - STBY
0.3 - ON
0.0 - return to automatic
10021: run RWR BIT
10022: TID range knob
0.1 - 25 NM
0.2 - 50 NM
0.3 - 100 NM
0.4 - 200 NM
0.5 - 400 NM
0.0 - return to automatic
10023: Jester Eject
10024: STT target:
0.00 - Stop force STT track
0.01 - AirTarget01
0.02 - AirTarget02
...
0.99 - AirTarget99
10025: break lock
10026: weapon station state
0.xy
x - station number (1-8)
y - state: 0 down (safe), 1 up (selected)
10027: weapon wheel option:
0.10 - MK-81H
0.11 - MK-81L
0.12 - MK-82H
0.13 - MK-82L
0.14 - MK-83H
0.15 - MK-83L
0.16 - MK-84
0.17 - LAU-10
0.19 - CBU-59A
0.20 - CBU-59B
0.21 - CBU-59C
0.22 - MK-20A
0.23 - MK-20B
0.24 - MK-20C
0.25 - MK-45
0.26 - GBU-10
0.27 - GBU-12
0.28 - GBU-16
0.29 - GBU-24
0.30 - BDU-33
0.31 - TALD
0.32 - SUU-25
10028: ATTK MODE knob:
0.0 - CMPTR TGT
0.1 - CMPTR IP
0.2 - CMPTR PLT
0.3 - MAN
10029: DLVY MODE switches
0.xy
x: 0 - STP, 1 - RPL
y: 0 - SGL, 1 - PRS
10030: DLVY INTERVAL
0.xy
x: first roller
y: second roller
10031: DLVY QTY
0.xy
x - first roller
y - second roller
10032: MSL Launch
10033: Radar azimuth -1 to 1
10034: Radar elevation -1 to 1
3 окт 2024
