Helldivers 2 Helmet Tutorial - Built for Dispensing Freedom

Подписаться 303 тыс.

Просмотров 133 тыс.

50% 1

How about a nice cup of Liber-Tea?!?!?! In this video we'll show you guys how to make your own Helldivers helmet
3D Prints: galacticarmory...
3D Files (cheaper by joining the Patreon while it's available): galacticarmory...
Visor clip: drive.google.c...
--------------------------------------------------------------------------------------------
Patreon printing community: / galacticarmory
$15/month gets you all newly released 3D files from the current and previous month
A yearly subscription get you ALL the 3D files I've ever made!
--------------------------------------------------------------------------------------------
Affiliate Links:
Bambu Printers (My Favorite): shareasale.com...
CosPLA: bit.ly/3vHHKnw
-------------------------------------------------------------------------------------------
My recommended 3D Printer for beginners: amzn.to/3lE8oXp
Interact with me on Facebook: / galacticarmorystore
Join our Facebook build group: / 817159885942595
Follow me on Instagram: / galacticarmory

Хобби

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 307

@flatlineforge5119 7 месяцев назад

Mandatory viewing demanded by the Super Earth Ministry of Truth

@GalacticArmory 7 месяцев назад

Lapses in attention will be considered treason

@RavenTheVelociraptor 7 месяцев назад

Everything I do is for Super Earth! 💛🖤

@Matthew_Lawless 7 месяцев назад

Equipment maintenance is the duty of every soldier.

@ianbuchan8548 7 месяцев назад

YES SIR!🫡

@breadwhithoutbutter2382 6 месяцев назад

That a request or an order? Either way, that's an "affirmative" from me.

@clumsycaden5708 7 месяцев назад

We need a full armor set!

@Viscratus 6 месяцев назад

I'd buy it so quick

@sylokthedefiled 6 месяцев назад

agreed

@VersedPlaysTM 6 месяцев назад

@@Viscratus There is on the website already

@Gatsu3D2A 5 месяцев назад

I'm almost done printing the full armor set

@clumsycaden5708 5 месяцев назад

@@Gatsu3D2A awesome! I was planning on printing a set too but I got side tracked by a power armor project

@tino_sotl 7 месяцев назад

Just want to say that I, and I'm sure a lot of us here appreciate you including pre sliced bambu printer files with your new designs. And also extras like visor bucks and visor cutouts along with head sizing files. Its a huge reason why I continue to buy from you, thank you.

@TxTeabag 6 месяцев назад

I just downloaded this helmet and I'm using a Bambu Labs A1. I can't figure out how to use the pre sliced files. Any help in this matter would be really appreciated. I'm sure this cry for help is calling out my inexperience with this printer. I just got it and i love it. Still learning.

@loganmilton3509 7 месяцев назад

15:37 Handsome Squidward is peeking 👀

@henrybartholomewdinglenut1828 5 месяцев назад

Galactic budget low, resorting to diy measures

@JordanBlythe 7 месяцев назад

One of the better videos in a long time, the quality keeps going up! Great work fellas.

@kathiecraig2803 6 месяцев назад

Helldivers 2 cosplays, I can feel them coming

@sylokthedefiled 6 месяцев назад

i wanna make or buy one so bad even tho i’m a civ (i won’t be soon hopefully)

@bkb087 6 месяцев назад

@sylokthedefiled thers some but really expensive

@sylokthedefiled 6 месяцев назад

@@bkb087 true. but there’s also the other option of getting a 3d printer, getting the filament, and making it yourself which in the long run costs way more

@TeaGamingPanda 5 месяцев назад

⁠@@sylokthedefiledhowever you do get the benefit of making whatever you want, whenever you want. Unless you’re only doing Helldivers and only a one and done, then yeah

@sylokthedefiled 5 месяцев назад

@@TeaGamingPanda oh yeah definitely. i’m planning on doing a bunch of cosplays so i’d wanna get a printer

@MustachePrinter 7 месяцев назад

You have inspired me to finish sanding my projects that I have on the back burner 😂 thank you

@WiseManArsenal 7 месяцев назад

Next time don't run into my 500 kg 😂

@katherinehooper1157 7 месяцев назад

For democracy! Excited to get my kit from you guys and get to work on it!

@walkerdrae 7 месяцев назад

Can't wait. Just bought this from your site. This will be my first 3d printed helmet ever.

@fluffyninjamenace4661 7 месяцев назад

Yes brother! Keep spreading Freedom and Democracy!

@insertnamehere6659 4 месяца назад

My brothers got me this as a 31st birthday present, which was super cool of them! I don't know the first thing about making cosplay helmets though, so this should be... interesting, lol.

@gzilla14031 6 месяцев назад

My jaw dropped with the elastic helmet reveal, thats such an incrdible idea and design

@WiseManArsenal 7 месяцев назад

Me: throws stratagem Jamie: dies Me: opps 🙈

@Ace101Infinity 7 месяцев назад

you beat me to the punch on cosplaying helldiver stuff

@mustangenthusiast 7 месяцев назад

Thank you, now I can do my part for super earth

@Thingsonthings. 7 месяцев назад

Does bondo spot puddy in paint thinner work as a work around instead of resin? Also do you put the clear coat on before the mud wash or after and then repeat?

@ThatTallGingerYT 6 месяцев назад

0:40 he did it he said the thing

@furimindusties5736 5 месяцев назад

I havent watched the tutorial. Already ordered the kit. Id blame it on inebriation, but that'd be maybe a lie. It is a birthday gift for my brother, it might come in late, but ill make it work some fucking how.

@devineartwork2827 7 месяцев назад

Once citizens have finished their mandatory viewing of this video, they must immediately deploy to the front lines.

@p5ychojoe138 7 месяцев назад

One thing I like about all the armors in HD2 is that almost all of it looks practical like something I could see being used IRL, even the flashy ones for super patriotic Super Citizens.

@chandlersimonsen 5 месяцев назад

I noticed that its not mentioned what technique is used to "connect or bond" the separate pieces of the helmet together in the video.

@Bogusgassman 7 месяцев назад

I'm doing my part..... For Democracy

@LandonMoore-y2h 6 месяцев назад

Does the helmet come colored? Or do I have to spray paint it myself

@katherinehooper1157 7 месяцев назад

Questions for you guys! What clear coat do you advise? What kind of visor clips are you using? And will you be offering the logo decals for sale?

@dylanwiley1921 7 месяцев назад

Democracy shall liberate!!

@SteveWFitch 7 месяцев назад

Amazing! I've been waiting for your build for this awesome game! Also, my head is HUGE! I feel your pain lol

@omega-xis1943 7 месяцев назад

I have a question. Have you tried abs smoothing your helmets? It could possibly lower the amount of time sanding needed. Also, you can use acetone to glue the peices togethor easily! Only problem would be the fumes and needing to make a big enough box and platform for the helmet to smooth.

@GalacticArmory 7 месяцев назад

These are PLA but definitely want to try it on a full helmet

@ImmortalReaver 7 месяцев назад

I was doing the UV resin and filler primer layers but after the UV resin when you clean it off with alcohol it tears up the filler primer. Do you just not bother with the alcohol?

@MjrProps 7 месяцев назад

You clean off the UV resin before applying the filler primer. Always make sure to clean off the UV resin, that stuff is nasty!

@alexanderlaird6206 5 месяцев назад

As someone who knows nothing about 3d printing, why do you add resin and sand it?

@Ratboycure 5 месяцев назад

There are little ridges between the print layers. Mine arrived today and the print lines are actually really minimal for the most part. The top of the dome and a few select areas will need some work but all in all pretty dang smooth they must be printing in a reasonably high resolution and that is appreciated.

@reclaimer8761 7 месяцев назад

How did you attach the different pieces together?

@bardales997 7 месяцев назад

my question exactly too I'm trying to figure it out if they welded them together or did it differently

@GrazyX13 6 месяцев назад

Where did you get those stickers, did you make them? I can't seem to find anything easily available online.

@Ratboycure 5 месяцев назад

I have been looking for stickers myself and not finding exactly what I want. I may end up hitting up the local sign shop. Either bribe them with beer to machine cut me some or alternatively they would likely have some small scraps they would be more than happy to give you. With the scraps you could either do cut vinyl stickers or make some stencils to get some clean paint Down. Suprised that they have been so elusive.

@SephzillaDZX 7 месяцев назад

Yeah I think I'm gonna try to make this. Visor will be the tricky part though.

@shrunkenheadsandspiderwebs697 7 месяцев назад

FOR DEMOCRACY!!!

@Darth_Anubis 6 месяцев назад

Do we know the size of the stickers used for the skull decals?

@ldavidson11 7 месяцев назад

Pick up a variant of this helmet over the weekend... can't wait to print on my new Creality K1 Max , Any cubic Kobra max studio.....The files are amazing......❤

@SpiritOfFire247 7 месяцев назад

Anyone else for some reason allowed to see the thumbnail video without yt premium?

@Samuraiguy01 6 месяцев назад

How do you make the straight line on the curved surface for the yellow paint? 11:03

@Ratboycure 5 месяцев назад

Looks like it was marked with a wax pen then used automotive pinstripe tape then painters tape. Don't think he actually said that but I think that is what he did looking at the footage

@randomethics7528 7 месяцев назад

Yes I wanna cosplay this for DragonCon

@jimjohnson4579 7 месяцев назад

You guys going to sell the skull decals?

@Bandit_iso 6 месяцев назад

Step one... own a fkin 3D printer Step two... learn CAD

@schmiddy8433 6 месяцев назад

I think some day I'm going to design my favorite helldiver helmet into a functional respirator, the helmet designs in this game are truly incredible.

@mrluisr 7 месяцев назад

I've long admired Galactic Armory's work. Im currently working on an Ashoka figure from this crew. I am planning on upgrading my FDM and once I do I will become an annual patreons member. Too many great files to not join the community.

@praesil8136 6 месяцев назад

What are those clips you used to hold in the visor?

@marcos92376 7 месяцев назад

So should I just get the specialist tier if I want to get the stl files for the helmet? Cause from what I’m told we get to keep the files from whatever month we were subscribed to and the previous month if I’m not mistaken.

@theace1602 7 месяцев назад

Purchased the helmet and visor. parts are coming out super clean! cant wait for the armor now

@lakehamlin6611 7 месяцев назад

Where did you buy this

@theace1602 6 месяцев назад

@@lakehamlin6611so he sells his visor and helmet on galactic armorys website. my printer shit the bed so i just bought the physical helmet, its like $100 all together with the completed print and visor.

@Magosspud 6 месяцев назад

Where do you get the visor? I don't see it on their shop

@theace1602 6 месяцев назад

@@Magosspud so go to the helmet, and in the options it says helmet only, with visor, and then there’s two options for visor only, there’s a clear and dyed version. You have to make sure it’s the physical product though and not the 3D file

@Magosspud 6 месяцев назад

@@theace1602 Thank you! Gonna pick one up now

@GrazyX13 6 месяцев назад

How do you fuse the back part and dome together? do you just use glue, do you chem weld them? Im unclear on how to do it...

@Ratboycure 5 месяцев назад

I would tack it in place with super glue or a glue gun and use 5 min epoxy. Probably the best for the least.

@Ratboycure 5 месяцев назад

5 min epoxy on the inside just for clarification

@GrazyX13 5 месяцев назад

@Ratboycure yea I ended up figuring it out. Thank you though!

@NathanC35 6 месяцев назад

where do you get the sticker / decals for the sides of the helmet?

@Ratboycure 5 месяцев назад

There are a few of us looking for sticker solutions. You have any luck yet?

@neversaydiegaming4868 6 месяцев назад

What visor clips did you use? I cant find them anywhere

@Ratboycure 5 месяцев назад

I was wondering that myself I am guessing they printed them. I have been considering magnets myself

@neversaydiegaming4868 5 месяцев назад

@@Ratboycure Hot glue held mine in just fine. And peels off pretty easily

@jmack5363 7 месяцев назад

What would you recommend for padding on the inside of the helmet?

@beanboi3521 7 месяцев назад

Any plans on providing the body armor pieces?

@marvinschmitz4952 5 месяцев назад

Any alternative to do the visor?

@Dj_Dedf1sh117 7 месяцев назад

I think i finally found my helmet for kit bashing,just imagine the possibilities this base helmet with a touch of arf/arc trooper helmet pieces from star wars,a radio or flashlight attachment type piece from halo based on either the odst or recon spartans and finally a nice paint job to finish it up(me personally id put it as a white and blue color scheme like five o first and keep the mouth plate black with abit of vent detail added in)

@ravendevino6419 6 месяцев назад

Thanks so much for the tutorial. Printing out my pieces now.

@HuemanBean 7 месяцев назад

Nice, any plans for the body armor coming to the store soon?

@TheNightHawk0024 5 месяцев назад

What did you use to mark the stripe on the helmet so you could line up the tape?

@GalacticArmory 5 месяцев назад

A white colouring pencil.

@michaeldixon2178 6 месяцев назад

Fantastic video, it actually finally pushed me over the edge to finally buy a printer. Im in the process of making the armor and my only question is were did you get the stickers?

@Ratboycure 5 месяцев назад

There are heaps of people looking for the sticker answer. Maybe look around locally for a sign printer might be the play.

@RinAldrin 4 месяца назад

I wanna build this but the CosPLA is out of stock. Does anyone know of an alternative?

@vibedetector6753 7 месяцев назад

So cool man. Need to buy a Filament printer my resin one is just too messy right now

@user-yp7ns8nx9s 7 месяцев назад

How do you attach the separate pieces?

@tylerstab5067 7 месяцев назад

Typically with PLA there's a few options. You can use E6000 or something like 'goop', which chemically bonds the PLA together. Or you can do my preferred method, which is to first us an adhesive and then a soldering iron to weld the pieces together on the inside of the helmet. You can always use additional material like steel stick or other components after depending on what you need to make sure everything is structurally sound.

@둠칫둠칫두둠칫 6 месяцев назад

how did you make the mold for vacuum forming?

@Ratboycure 5 месяцев назад

Think they said it was a print

@BandDBricks 7 месяцев назад

bought the files as soon as I saw this on your shop. So cool!!

@BucketheadStudios 5 месяцев назад

Just wondering, as I need to do the elastic mod for mine too, did you glue/attach the visor to the dome or the faceplate?

@onatgz 6 месяцев назад

nice intro.

@vergil-__ 5 месяцев назад

what plastic is the buck made from?

@Ratboycure 5 месяцев назад

Looks like the same PLA the helmet is printed in cosplay pla I think they said

@Ratboycure 5 месяцев назад

My helmet arrived today. I gotta say it actually looks alot cleaner out the box than I thought it would. The print lines are fairly insignificant to what I thought I would be working with. Nice job thanks boys!

@nmf0 5 месяцев назад

Did it come painted or did you have to paint it yourself?

@Grievous39 5 месяцев назад

@@nmf0 It's a DIY helmet. Yes, you have to paint it yourself

@nifflergaming8922 5 месяцев назад

I know this is probably a stupid question, but i am new to printing. How much filament would the full armor aproxamitly take? And do the files fit an ender 3 v3 SE

@ZiPZgredek 2 месяца назад

Nice! Just printing first part of this helmet. I have K1 Max. Can i print DOME without supports inside? Is it possible?

@ianbuchan8548 7 месяцев назад

Currently printing the "hero of the federation" helm in one piece on my ender5 plus at %97 scale. 4 days and 3 hours!🫠 gonna make a heavy armored version!🤑

@AngelOfChaos56 Месяц назад

I'm glad you mentioned print time. My Elegoo Neptune 3 max says B-01 helmet full build will take nearly 5 days at 100% scale. This is out practice run to get the right scale 😄

@ltworcestershire9359 Месяц назад

Hi guys, I've bought, printed and sanded this helmet, I'm at the painting stage rn, and would like to ask about the decals, do you sell the files so I can print them? Many thanks, A fellow helldiver

@josuecontreras8218 5 месяцев назад

Hello! I am from Argentina 🇦🇷 I bought the armor and helmet files. I am making the helmet and I am having problems making the visor, what material do you use? thank you so much

@H3LLAWAY 7 месяцев назад

Hello! Guys, did you have shipping in Russia? I was thinking to make a present to my friend on his B-day) Thank you!

@tantrumus7186 6 месяцев назад

Loved your effort but when you snapped your fingers your hair wouldve been buzzed...

@ilyamatveev7075 6 месяцев назад

Hello everyone, can anyone send me these drawings to make a helmet?) I’m just from Russia and I can’t pay in any way, maybe someone bought it and their files are just lying around

@jlgspaz13 5 месяцев назад

Were you able to get the dome printed on the X1C? It seems no matter how I orientate it, it says it’s impeding on the parameters in some way. I’m using 100% scale just for context.

@theforgottenspartan7171 5 месяцев назад

Just a question, I'm trying to follow what you guys did for your color coating for the helmet. What did you guys use for the black oil paint and when you guys put it on the helmet was it mixed with water or was it a specific paint?

@bradyyoung9596 5 месяцев назад

What size build plate is recommended/compatible for 100 percent scale?

@ImmortalReaver 4 месяца назад

The visor should be a little bit chromed in the inside. Not just straight black 😎🤙

@Nathan-rp5br 4 месяца назад

Hi! Bought Galactic Armory's full set and helmet and Im super excited to start working on it as it is my first cosplay! What was the attachment process of the three helmet pieces after @5:00?

@AngelOfChaos56 Месяц назад

How long did this take to print? My printer is saying 4.5 days minimum for full helmet as one piece, or for the separate pieces, 3 for the dome and 1 day 8 hours for the other pieces. What settings did you use to get it printed so quickly?

@Njndirish13 5 месяцев назад

How would you go about making the helmet for someone with a 26" head? (I noticed the file has 24" max)

@j2thedissle304 5 месяцев назад

Hear me out. HELLDIVERS BIKING HELMET

@Magosspud 6 месяцев назад

Can't wait to get to work on this once my Bambu is fixed. So glad youre gonna be selling visors lol

@Ratboycure 5 месяцев назад

I saw a couple people thinking it would be a good idea to do their own. I personally was "take my Money!" For the visor instantly. They are kinda warped as shown in the video but still satisfied with the purchase for all intensive purposes they look real good. I think people underestimate the trickiness involved in such an endeavour. They even chemically etched them for us.

@Magosspud 5 месяцев назад

@Ratboycure Thankfully mine came out perfectly fine, no real warping to be seen. Gladly would pay the premium again to not be completely blind like my other helmets lmao

@Ratboycure 5 месяцев назад

@@Magosspud funny and nice work!

@Scootersquad91 4 месяца назад

Hey does it say how much filament to use on the file info I need to know so my buddy can get the product?

@Zoten001 2 дня назад

I think I need a bigger workspace than I currently have. No way I can make all of this in the space I have.

@jackal6902 25 дней назад

Great to see some print videos using Bambu Labs. 👍 Am surprised how much post print work is required.

@HisNameIsX1 2 месяца назад

Would the STL files fit with the ender 3 v2 build plate volume?

@orangethesaberguy7638 7 месяцев назад

Fantastic tutorial! Can’t wait to do a full cosplay once I have the time 😂

@liamatte 5 месяцев назад

Does anyone know the dimensions of the biggest piece in this? Was thinking of printing it but im not sure if my printer is big enough for it. I saw that some of the pieces have an optional pre cut to print them individually for smaller printers, bit id rather have exact dimensions before i buy it.

@bigbools3951 4 месяца назад

Would an A4 / Letter size vacuum former be big enough for this and other visors?

@renzofores 4 месяца назад

I would add that you will definitely will be cleaning the helmet with IPA after the coats of SLA resin, if not it will be unsandable as the resin will be sticky

@sierra7534 2 месяца назад

Wow, you've come a long, long way in your setup/shop in the last 3 years. I hope business is booming for you

@turwaith 3 месяца назад

I am about to start printing my helmet on my Ender 3, which means I can't print the dome as one piece. How do I make sure the pieces of the helmet do not break apart again? I want to be as sure as possible that it it not gonna break apart while working with it or wearing it.

@AngelOfChaos56 Месяц назад

Does anyone know if they painted the visor buck, or just sand until smooth?