MESTASTIC FLASHING TOOL flasher.meshta... MESHTASTIC MAIN SITE meshtastic.org/ EBAY PURCHASE GPS MODULE ebay.us/AqGkIe GPS BOOSTER ebay.us/jIlYOR BENDER SUPER CASE RED AND BLACK zerofox3d.com/...
Very interesting indeed thanks for all your videos... Lot of knowledge sharing 💪 Some other user asked if we could use this as a normal tracker. Ex dogs cars etc... The only drawbacks would be to fail connect to the mesh or being out of range? Ex deep forest/mountains etc... Could be a possibility to connect tx lora to wifi so it transmit position to other rx lora with wifi? That way would be the best of both worlds cheers!
Dear Sir, I am writing to you from Chile, where I am currently involved in a project that utilizes the LoRa32 v2.1.6.1 module from LilyGo. My aim is to set up a mesh network with several nodes, each capable of transmitting data from a flow sensor and GPS to a master node. This master node would be connected to a cellphone. Would it be possible to display both the location and the flow data on the same map on the cellphone? I would appreciate any guidance or suggestions you might provide.
very easy: use the android app. connect t beams with android app by bluetooth. put all t-beams on the same lora channel: (channel menu, just enter a channel name for first device, copy the channels qr code , and then at the same menu of android app. use this qr code for the channel setting of other devices…) (or just put all nodes on default channel by reseting channel settings, but like that, other users can see your positions too) by default, all devices will now send there position to all other devices. 1 device stays connected to android app on tablet, where you can opten the map (within android app) and there it shows actuall or past position of other nodes… to get a good range for reception… put the node of command vehicle HIGH above Ground maybe on roof or a mast attaqched to the car. the tablet can still connect by bluetooth then you should see the othger nodes position also from a few km away… the nodes start sending position when they have a gps fix. that may need a few minutes on startup… no need to use wifi or hotspot or mqtt…