brother as always you show the real world of what,s really going on ,,,,, with this guns and tools for beginner like me.. i love it brother ,,, i got me a vevor ,,, i also got me an R500 ,,, i got me an italco b4000 l.v.m.p ,,,, is same as sata b4000 l.v.r.p ,,, for sure i am learning with your videos thank you so much
Black widow 2.0 ,the people's paint king ,good luck to everyone, who ever wins will always remember winning something nice ,because most of us never have won something,
Sir, thank you for a very helpful video - I have a 5 CFM compressor with 50 liter tank and was hesitant to buy a quality HVLP gun in case my compressor wouldn't cope up - but it seems it won't be a problem - thank you again
Hi UPK, Good Video Buddy! FYI That HF Compressor (I have the exact model) puts out 4.7CFM @ 90PSI and 5.8CFM @ 40PSI. You were spraying at 30 PSI so I'm guessing you were consuming around 6.0 CFM. My compressor fills to 125psi then cuts out and comes back on at 80psi. The refill with "nothing attached" takes 1.5 minutes from 90psi back up to 125psi. I broke out my R500 and set the gun to 30psi and sprayed until the compressor kicked on and I was able to spray for 1 minute 50 seconds. I continued to hold the gun (settings wide open for both) open and it took the compressor 7 minutes to shut off. The motor cylinder was HOT but running fine. Here is my take. Because these small compressors are basically running non-stop after the initial spray both the compressor and the compressed air are getting hotter and hotter. That means moisture and oil vapors! I think an oil trap and a coalescing filter is a must. What do you think?
Black widow 2.0, true ppls champ!! Been painting cars at carmax for a year and a half now and about to open my shop at the end of this month. You helped me more than you could imagine bro thank you for everything
I have a 29 gallon HF compressor 4.5 cfm at 90 psi. I'm planning to use an Eastwood Concourse LT100 and this video has made me feel good about it. Thanks!
Thanks for the great content! I downgraded my garage and replaced my monster compressor to a 30 gal single stage 120v compressor. I'm setup for auto engine and welding so I no longer needed the big guns and use mostly 18v cordless tools. That being said, I'm interested in body fender and paint work. So thanks again for this!
Bare love for replying back so im purchasing the areopro a610 guns 3 of them will they suffice in Sealer, base, clear Also what tips size you recommend for each stage my bro
Good work on that bumper. I also acquired a Black Widow HTE. Looking to do small jobs on my own cars.The video gave me some ideas. Keep the videos coming Peoples Champ.
@@UndergroundPaintKing- heads up.. let everyone know be cautious of scammers sending out claims they won and asked for delivery and insurance fees.. Scammers just hurt people on another paint channel giveaway..
@@UndergroundPaintKing - sadly it happened this week.. I just didn't know if you wanted the name of the channel to check it out.. just didn't want anyone taken in this family
Well the way u know how to do a pu bumper I know you will know my brother im at a stand still on my car right now cause I need to know how to prep them for paint I be spreading yre channel on my face book and other channels you a awsome painter u know all the tricks I would appreciate it my brother
Between your videos and Paint Society's videos I've learned so much, when I first started looking into painting I was getting discouraged because everyone online says you need a $2,000 compressor and high end equipment to get a quality job and you prove time and time again that's not the case. Do you think this setup in this video could paint a whole truck?
I’m glad that I could help in any way with the videos Joseph 💯 you could do a whole truck with this setup but you would have to be aware of the pressure dropping on you as you’re spraying so you would have to wait at times for the compressor to catch up and then continue, but it’s very possible to do!
I added a second tank to my air compressor to get more air flow I now have two 25 gallon air tanks hooded up side by side for my home paint jobs because the single tank wasn't enough to keep up been painting for over 34 years as a RV body man painter at work we got a 1000 gallon tank to run our shop for up to 24 workers to use at the same time
I have a black pearl Grand Cherokee that you have inspired me to repaint the roof due to the clear coat going bad on it. your video is really clear on laying the paint down with a small compressor. Thanks.
UPK, the videos here on your channel were my complete inspiration for doing my own paint on my '67 VW convertible, using the Sprayit 500 LVLP and H.F. 29 gal. compressor. Came out nice, despite being a fussy single stage red. I can't thank you enough for sharing your incredible knowledge in such a "user friendly" way! Now I gotta try that Black Widow!! Keep it coming!
It’s always great to hear success stories like yours, I hope the channel continues to be helpful and let me know what you think about the black widow if you give it a try 🙏🏽💯
Realistically your favorite gun, the A610 isn’t really that much lower than this gun. The Chinese marketing advertises it as 3-3.9 cfm but Pete’s Hobbies measured it closer to 8cfm which isn’t at all surprising since that gun requires 35+psi to spray well
Great video UPK - Yes it's nice to have a huge compressor but not necessary. I've had pretty decent luck using smaller ones. Keep up the good work my friend 👍💯
Black widow 2.0 giveaway "Let's Goooo"!!!!! Also I wanted to know, what time you going live for the giveaways? Keep in mind we all work different times then each other and some jobs we can't be on our phones while on the job too. Thanks sir!!
Great video as usual bro!!...i just received my astro euroHTE spray gun an also ordered a vevor LVLP....will be using a 30 gallon compressor..you just gave me confidence to use the HTE being it consumes more cfm! ..thank you!
Bruh I have been watching your channel for about two years and now I’m going to try and paint a tailgate on my truck first, hopefully it comes out good I will let you know.
Black widow 2.0. Glad I found your channel. Nothing but learning from you and I appreciate that. One thing, do you factor in the length of the air hose to how you setup for a small compressor?
