High power DC to DC step up boost converter circuit 

Actually it is basic circuit without feedback, it works maximum 20w, I'll soon upload video that will be able to drive higher load with feedback for constant output voltage. Subscribe, turn Bell on for ALL to get notified.

Since the circuit is very basic without feedback, so suitable for led lights only

Thanks for watching 🙂

@@CreativeTechos Can I take half watt resistor.???.220ohms???

Yes

I'll make tric based, I'll try to upload soon

Thanks for watching my friend 🙂

Thanks for watching 🙂

Yes,1n4007 can be used but, schottky diode has low voltage drop. Use 2x 1n4007 diodes in parallel.

Since it is basic circuit without feedback, voltage output will be max 24v

Thanks for watching 🙂

It actually depends on load, but with leds it will last longer

Thanks for watching my friend 🙂

It gives maximum around 24v and that is adjustable with Potentiometer

@@CreativeTechos seeing is believing

Depending on the transistor And cap it may give up to 30v output.

@@jalalrai7419 what about output current/amps

@@Xavier_Everwhere Dear thanks a lot Frankly I have the same device for more than one year. Concerning the Amps, I have never measured, though simple. But from my experience I could guess it is about one ampere.... Not sure. I will measure. When we operate with LEDs it's fine. But with shaving devices it heats a lot. It is great Thanks

It is just a basic circuit of boost converter without feedback.

Power will be 0-24v max output

I mean what is the outpat maximum current?

I actually used N channel mosfet for higher current output