High speed X-ray video: jumping beans, wind-up toys and more!

Подписаться 843 тыс.

Просмотров 248 тыс.

50% 1

High-speed X-ray video captured with a Dectris photon-counting detector. I show how the process works and how this detector is different than normal camera detectors.
www.dectris.com/
media.dectris.com/Technical_S...
Mexican jumping beans: www.amazingbeans.com/
Geiger counter: mightyohm.com/blog/products/g...
X-ray timelapse video: • X-ray timelapse of flu...
ImageJ image format converter: imagej.nih.gov/ij/ (the NIH's SSL cert expired?)
Flipping through images fast enough as if playing video: www.irfanview.com/
Video editing software: www.blackmagicdesign.com/prod...
The sequence of tiff files directly from the sensor contain a lot of temporal flicker -- probably because the X-ray tube itself has time-varying output. This isn't so bad at 60Hz, but quite a problem at 300Hz. I used Resolve's "color stabilizer" to maintain constant levels throughout a clip, and was impressed how well this removed the flicker.
Support Applied Science on Patreon: / appliedscience

Наука

Опубликовано:

4 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 885

@AppliedScience Год назад

Someone on twitter asked if there is a light-to-frequency conversion for Mexican jumping beans. Wouldn't it be funny to make a camera with jumping beans as pixels?!

@jong2359 Год назад

I bet if you could articulate some kind of algorithm for light-to-frequency, had a medium large enough in scale to average out the imperfections, and fed an AI off of all that - the generated images would be fantastic.

@NiHaoMike64 Год назад

Or what about the spectral response of jumping beans?

@llMarvelous Год назад

This is mind blowing, such setup in your lab Also about uncompressed tiffs and an overall size and speed of output: as far as I know, substantial amount of cost of LHC, despite the complexity and high cost of the structure itself and its sensors, is actually a computational setup (I mean servers, network and so on), because there is no way to store information at that bitrate and enormous amounts for later processing, so data should be processed on the fly, and actually store only certain events with given conditions

@jhoughjr1 Год назад

@@hirobian2 so a smol lobster?

@humanistwriting5477 Год назад

That would be fun! Yeas!

@mikeselectricstuff Год назад

Re. jumping beans and light, it might be fun to project a symbol on the floor with beans scattered randomly, and do a timelapse of them clustering around the dark areas.

@bluemamba5317 Год назад

That is a good idea

@Max-kc2rc Год назад

Imagine how often this exact thing happens in nature - too slow for us to grasp how cool it is. Kind of a natural sun-dial with alarm sound

@ahronwayne5115 Год назад

Get the LEDs to go in a grid, have the beans move, then off all LEDs and take a picture. Stop motion 2D video using jumping beans!

@BobCat0 Год назад

Sounds like a good Cody's Lab title intro. ru-vid.com

@bluemamba5317 Год назад

@@BobCat0 I was thinking that too, totally something Cody would do.

@MajhTown Год назад

Got the notification for this at the same time as a tinder match… i choose this every time.

@CircaSriYak Год назад

Since when do science nerds get tinder matches

@voidswarranties Год назад

Ah yes, a man/woman of class.

@dannymac6368 Год назад

Tinder match is more time-dependent, video likely isn’t going anywhere anytime soon. 🤷🏻‍♂️

@Marin3r101 Год назад

@@dannymac6368 hes making a really trash joke nerd.

@jannejohansson3383 Год назад

@@dannymac6368 if that tinder wonder go away under 15 minutes, maybe it's not worth for list "my future children's parent".. If you want to just took your toy to out have some fun, no tinder needed. 😱

@JonaJona Год назад

I've worked at particle accelerator x-ray sources and we indeed had a bunch of these high speed photon counting detectors from Dectris and other brands around, though I've never seen such a small one. The Megapixel 2000 fps detectors I know of were in the lower six digits in price. The cool kids nowadays have Megapixel Megahertz detectors at free electron lasers though. Those capture short bursts of images at 5 million fps in full multi Megapixel size with large dynamic range

@ahronwayne5115 Год назад

Wish I was a member of the cool kids :/

@CircaSriYak Год назад

POV: you work at black mesa

@douro20 Год назад

I would imagine the large aperture ones are in the seven figures.

@LordDragox412 Год назад

@@CircaSriYak That place really turned out to be a black mess, huh?

@JonaJona Год назад

@@douro20 I think not quite. At 7 digits you're getting into the range of inhouse development at the respective facilities

@smartereveryday Год назад

Awesome video!

@DerekWrightX Год назад

Yeah it's cool! Hi Destin

@ke6gwf Год назад

I was laughing at that 6 figure delicate machine on your work bench by the vise in your garage, propped up on a roll of tape. You know they like you when they let you play with their toys!

@charliemopps4926 Год назад

Years ago I had a serious problem with GERD (acid reflux/heart burn) that I eventually had fixed via surgery. Prior to surgery they try various medications or behavior modifications to control the disease as an alternative to surgery and this involved several visits to a radiologist. At one appointment he said "you seem like the type that would be into science..." and after I confirmed his suspicioun he offered to show me a "live x-ray" of my digestive track while swallowing to help me better understand the mechanisms involved, but at the cost of a slightly increased x-ray exposure. He felt it was safe and worth the effort but didn't want so it without my understanding and consent. I was, of course, excited and approved and he brought up a live x-ray of my stomach and showed me exactly how swallowing worked while my body was resting in various different positions. It's actually a lot faster than you think it works be, the food launches down your throat like it was shot out of a slingshot. The "plumbing" of your upper digestive track is actually fairly simple and changes in how you lay in bed can have quite a dramatic affect of the ability of the contents of your stomach to migrate back up your throat. It was very informative and well worth the slightly increased x-ray dose in my opinion.

@ChargedCMOS Год назад

That'd be radioscopy .

@markissboi3583 Год назад

i used to have severe heartburn attacks 2006 my c/o worker told me you put bicarb soda in pools to reduce acid dont you ? well bicarb works the same on stomach acid Next attack take a teaspoon bicarb soda and wash it down with a bit warm water 15secs its gone he said - 2am that week felt like fish hooks been dragged up my throat got out bed burning like hell took T/spoon and watched the clock 15secs L8tr Burp Gone ive actually cured my Heartburn i suffered for 10's years Finally peace again works great solved the problem FLU / COLDS i discovered sipping the hot sauce was preventing flu attacks 1am test this woke up feeling crook took a swig 2am gone cured never had flu since 2004 again :) the stomach is is the gateway prevention from bacteria learning what herbs and ? to use is the key to prevention i guess :) Like an engine bad fuel runs bad .

@bakedbeings Год назад

@@markissboi3583 The chunky heartburn tablets/chewables from the supermarket/chemist do the same thing because they're mostly bi carb 👍

@PetWanties Год назад

Wow that's awesome!

@psirvent8 Год назад

@@markissboi3583 I don't know if it's available in your country but tarragon (Artemisia Dracunculus) essential oil works like a charm to stop heartburn. Put one drop on a neutral tablet specifically designed for the purpose of ingesting essential oils and the pain should disappear fairly quickly. If it doesn't work try two drops. *Some disclaimers though:* Never ingest more than two drops at once. Don't take more than 6 drops a day. Never ever ingest essential oils on their own as this can cause burns in the mouth, esophagus and stomach. Don't take tarragon oil for more than 7 consecutive days.

@mannys9130 Год назад

You're so cool. Honestly, truthfully, I love how you do these experiments and demos which are fascinating and then go in depth about all the relevant details. I always enjoy your videos. :) Cracking your knuckles would have been great to see on highspeed X-ray if you're willing to accept the dose. 😺 A second or 2 at most to crack one phalangeal joint and capture that video.

@csours Год назад

Or just move your hand normally

@jhoughjr1 Год назад

His ultra nerdness has wrapped around into ultra coolness.

@PabloEdvardo Год назад

@@jhoughjr1 That describes the channel in a nutshell. Especially stuff like his own electron microscope.

@SilentRacer911 Год назад

I have joins that crack on the regular, without provocation. I’d love to see what that looks like in this thing. My ankles are particularly loud for some reason, I’m only 32… Either way, awesome video as always sir. I love when I get the notification for this channel

@mannys9130 Год назад

@@csours I mean, that's pretty straightforward. A synovial hinge joint like in the knuckle just glides as it bends. It hinges open and closed, so all you'll see are the bones rotating about their cartilaginous connection which isn't very visible due to its density. Cracking the joint though...that's an interesting phenomenon. It's a rapid dissolved gas release from the synovial fluid. The bones move quite fast.

@nerdy1701 Год назад

Honestly the jumping beans was one of the coolest things I have seen. Great content as always.

@raymondo737 Год назад

Up until now I thought that jumping beans are something out of the cartoons. Wow.

@Spectre4490 Год назад

First time see this insects and how they live First i was thinking it a toy, lol

@sheerun Год назад

You mean one of the most cruel things

@nerdy1701 Год назад

@@sheerun I said what I meant and I meant what I said.

@fabioyy Год назад

i google it, and there is worms inside it

@BlankBrain Год назад

In 1972, Field Emission Corporation had a high power pulsed x-ray machine that ran at 1000 frames per second. The setup used a Varian image intensifier tube and a high speed camera with rotating mirrors so the film never slowed. The demonstration showed a model airplane engine running. The actual use was to image pig brains under high G loads using a rocket sled and rapid deceleration. The data was used by the space program and military. Other products allowed stop-action x-ray images. One machine was capable of producing a 2.5 MeV pulse of 4 ns duration. There were interlocks to the room because the scattered radiation dose from one pulse was lethal. The unit was used to x-ray bomb detonations in the dessert, x-ray aircraft engines, simulate atomic blasts in small spaces, radiation harden semiconductors, and other things.

@Muonium1 Год назад

sounds very similar to the DARHT facility at LANL to image the implosion hydrodynamics of nuclear weapons core surrogate plutonium pits.

@IDoNotLikeHandlesOnYT Год назад

Back in 2010 I was touring a few universities to see where I might want to go, and met a guy at UCSD (I think) who told me he'd gotten an assignment to take a photo of a large explosion without detecting any of the explosion's own light, and he'd used X-ray imaging to do it. I wonder if that was related to this?

@0xTJ Год назад

Seeing those bugs in moving x-ray is really cool, I don't think I've seen anything like that before.

@InLoveWithFlight Год назад

We are using DECTRIS detectors at work (synchrotron beamlines) so I was very intrigued to see one of these on your channel. Amazing video. Another thing worth mentioning is the extremely high dynamic range on single pixel level, unlike any other X-ray image sensor. With these detectors any individual pixel can collect around a million photons before it saturates while the adjacent pixels still remain sensitive to single photons, so there is no bleed over as in CCDs. At the same time you can resolve intensity variations of a million to one while CMOS sensors typically saturate at 65000 counts. That's why they are so valuable for synchrotron science where the X-ray beam is tens of thousands times brighter than from an X-ray tube. By the way, the reasony why they're not so common in imaging is because their pixels are relatively large. The Pilatus models comes at 172µm and the new Eiger models have 75µm pixel size. That's a lot bigger than 5-10µm in high resolution imaging systems (with a much worse signal-to-noise-ratio of course). And of course, they are way more expensive than traditional imaging sensors...

@macyler Год назад

Aren’t modern CCDs pretty much immune to bleed as well? I thought all of the bleed you see in visible light photography is caused by diffraction and other artifacts from the lenses and aperture. This setup doesn’t have a lens and no real aperture, so no bleed. I might be wrong though :)

@jamesweng5241 Год назад

@@macyler I also work at a synchrotron with these detectors, the detectors with bleed issues she's talking about (like the perkin elmer XRD1621 for example) have a scintillator layer of some sort before the actual silicon detector layer. The bleed generally occurs there, where photons hitting one section of the scintillator layer cause a larger area to produce visible light photons that are what are actually detected. The flat field response of the scintillator based detectors also changes pretty dramatically for several days if they're exposed to a strong enough x-ray source, which doesn't seem to be an issue with the DECTRIS detectors.

@macyler Год назад

@@jamesweng5241 Interesting, I guess that makes sense. Thanks for sharing!

@BRUXXUS Год назад

Could you use this to visualize the X-ray emissions from peeling packing tape off the roll? That might be neat!

@glyph241 Год назад

🧿🕳🧿

@bjmcculloch Год назад

I think the trouble with that is getting an image to form on the detector’s focal plane. There’s no easy way to make a lens for x-rays. I think the way Ben is able to form an image in this video is that the dental x-ray tube he’s using is approximately a point source of light. So, tape may make a flash of x-rays, but the x-rays won’t form an image of the tape forming x-rays, if that makes sense.

@Aquatarkus96 Год назад

@@bjmcculloch If lenses are impractical, why not use mirrors?

@jhoughjr1 Год назад

He should be able to I hope he sees this

@Muonium1 Год назад

Prob not. The triboelectric scotch tape peeling method of x-ray generation only happens in vacuum where electrons have a large enough mean free path to accelerate to KeV energies needed to create x-rays via bremsstrahlung. You'd either need to put the whole detector in the vacuum chamber or build an x-ray transparent beryllium window into the vacuum chamber wall (very hard).

@terriplays1726 Год назад

Imagine my surprise seeing you having a Pilatus detector. My work place is probably one of Dectris‘ best customers, we have two of the current high end 16MP cameras, an even more specialised one for harder radiation, and at least a dozen smaller and older detectors. These things are used at accelerators dedicated to generating X-rays, so-called synchrotron radiation sources. Also funny that you mention ImageJ, we use it every day. Btw, the Mylar window is mostly there to keep the dry nitrogen in. The sensor is cooled with Peltier elements to sub-ambient temperatures and would form condensation without it. I’ll send this video to my colleagues for sure.

@Airclot Год назад

I'm a mineral physicist and have been to many beamlines for x-ray diffraction experiments for high pressure and temperature experiments in large volume presses and diamond anvil cells. We do actually use the detector for imaging too. For example, when we do deformation experiments on samples, we use cylindrical samples in a large volume press. We compress the anvil along the cylinder axis and we want to take both x-ray diffraction of the sample (to calculate stress) and image the sample with gold foils on top and bottom for contrast (to calculate strain).

@jong2359 Год назад

Harbor Freight sells ratchets that are made of composite instead of steel. I bet it would be pretty cool to see the mechanism of gears/pawls inside working without having to disassemble the tool.

@Quickened1 Год назад

As he stated, the object can't be too solid for the x-rays to pass through...

@jong2359 Год назад

@@Quickened1 i just said the body was made of composite, aka - plastic.

@Quickened1 Год назад

@@jong2359 being plastic is not the problem, it's the density of the plastic. Being a ratchet, it must be VERY dense to hold up to the kinds of forces a ratchet has to endure. It's highly unlikely the x-rays will penetrate, but I guess there'd be no harm in trying...

@jong2359 Год назад

@@Quickened1 Sure, the composite will produce SOME radiopacity, but you will still easily see the steel mechanisms underneath. It takes an AWFUL lot of plastic to render an exposure completely opaque.

@SeanHodgins Год назад

It sounds like you need to make a tiny mouse sized treadmill for next time. Also, I think capturing all of the different types of Cherry MX keyboard switches would be neat. There are animated split views of already, but IRL x-ray video would be very interesting, especially if you add the sound they make on top of the video.

@ncw911 Год назад

That's so cool! Actually photon coounting is also used in medical imaging. New generation CT scans with photon counting are making it to clinical use. They allow lower doses of both x-rays and contrast agents, higher spatial resolution, sharper images (higher signal to noise ratio) and allow "native" spectral imaging with higher precision. At least that's what the manufacturers are marketing, I've never got to use one yet.

@TheThinkEat Год назад

It allows ultra low dose chest CT that are studied for lung cancer screening in smoker ;)

@PetWanties Год назад

@@TheThinkEat that's awesome! Thanks for sharing.

@pkomarek Год назад

Does anyone know what the hurdles were for these new low dosage ct scanners? At first blush, it seems like the technology has been around for a long time. Given the cost of the normal machines, I would guess naively that the marginal cost of photon counting wouldn't be huge and the benefit of low dosage and reduced contrast seems enormous.

@ncw911 Год назад

@@pkomarek the question would be best answered by the manufacturers themselves but I think that as for any electronics-driven technology, the main limits were miniaturization and efficiency. For this kind of application we need hundreds of tiny and highly reliable detectors concentrated in a small area (a few sq. inches), which might have been too expensive until recently.

@broli123 Год назад

The "this is youtube" part sounded more like "I don't want to get canceled" XD. As always, awesome video.

@samykamkar Год назад

So cool! Finally got an old Faxitron DX-50 (12cm^2 sensor) X-ray and am attempting to add motorized CT scanning. Learning so much from your vids as usual!

@gsgeology6475 Год назад

I am a Technical Sales Rep for Proto X-ray Diffraction, and have been doing both single crystal and powder XRD for over 18 years. We use these detectors on our build for both types of systems. They are great for measuring diffracted X-rays from everything from small molecule organics like polymers to minerals and more. We are using one of these to assist in X_ray Metrology in a custom build for a customer.

@randyhavard6084 Год назад

This is the only channel on RU-vid where you can say "this is not just any x-ray video, it's high speed x-ray video"

@davidchang-yen1256 Год назад

In my work I have seen the big brother of this Dectris detector at a national lab synchrotron. Used for X-ray crystallography, essential for molecule structural analysis in drug discovery. And yes, they are eye-wateringly expensive.

@TheBlahblahblahhh Год назад

Look at this maniac putting the kids toy popper UPSIDE DOWN. Really cool video. Thanks for making it!

@Gurux13 Год назад

A few things to film that come to my mind: - Water spray bottle in action - Lens focusing/zooming - Lighter piezo thingy - Non-electronic alarm clock at an alarm time - Screw being driven into wood (or other materials?) - Mouse wheel (different mice?) - Mechanical mouse movement (the one where a ball is rolling) - Car horn - Fire (does it even show?) - Popcorn - [stretch] CD player loading a CD / floppy drive doing the same / cassette loader doing the same (I was always fascinated by the amount of engineering that went into these) - Gluggle jug, or anything else from Steve Mould's videos where they made 2d versions And oh so many others :) Please do keep on filming them, it's so cool!

@RicoElectrico Год назад

Now try neutron imaging - it's like X-rays in reverse: hydrogen-rich is black, metal is white. Although finding a suitable source _may be a problem_ :D

@DanielSMatthews Год назад

I guess he'd have to make a fusor.

@ahronwayne5115 Год назад

Neutron imaging. Now that's something I'd like to get my hands on. Well, not literally my hands.

@anotheruser9876 Год назад

And here I thought David Hahn had passed away in 2016.

@uploadJ Год назад

And - forget your complexion after that too. (Look what it did to Hahn.)

@aserta Год назад

10:13 i use JpegView (with the play slideshow/as a movie function). With a good PC behind it, it can render TIFFs that are quite high into a good movie. A few years back i scanned at max resolution with a big specialized scanner, a glass photography collection and i was using several scanners at once, so i'd use that function (automated a little) to check that all the TIFFs were in working order. It's a good program.

@douro20 Год назад

Apparently the technology was developed at PSI in Villigen, Switzerland and was first used in the CMS experiment at CERN. It uses a microarray of reverse-biased photodiodes which I believe are driven into the avalanche regime. The documentation for this camera warns you not to connect the computer to the Internet...

@WolfmanDude Год назад

I never heard about the jumping beans, the whole thing was new to me!

@HASANonYT Год назад

This is one of the very few contents (let alone RU-vid channels) that I instantly hit Like before even watching the video. Good job and best wishes from Syria ✌🏼

@moki123g Год назад

I wonder if a light bulb filament moves enough when powered up to be interesting?

@MadScientist267 Год назад

There used to be novelty versions that had a magnet in the bulb that would cause the filaments to wag back and forth... I'm sure to a degree there's an interaction with the Earth's magnetic field, make it sit there and shake

@vk3hau Год назад

I did a video of a tungsten filament in slow mo . . . ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-gshsoK4VOHo.html

@marcmarc172 Год назад

Honestly, one of the best (and one of my favorite) RU-vid channels that has ever existed. The content makes my jaw draw and me gently slap my head saying - 'how does he keep finding/making such interesting things'. LOVE IT!

@beatrute2677 Год назад

those contaminants on toys interest me alot. My dogs love tennis balls and things that have a cloth covering in general and ive always wondered what was in some of them considering their low cost and origin of manufacture.

@stephanieparker1250 Год назад

Yea I was a bit surprised and concerned at his finding on that toy! 😵‍💫

@markfergerson2145 Год назад

Almost had to be metal fragments from the machinery used in production of the fabric.

@llMarvelous Год назад

You know they always write in ingredients section on food “may contain peanut traces” or something like that I think there is a similar situation here Manufacturers make a lot of stuff at the same factory, and a lot of stuff may end up in the glue or in molten plastic, for example metal chips/dust

@SeanBZA Год назад

Most of that is the plastic they use being recycled cheap stuff, because it is not visible and needs little strength compared to thickness. So they use the cheap contaminated scrap granules made from all the floor sweepings, pvc foil stamping with aluminium bonded to it (think of things like PVC blisters with a backing, what the blister was punched out of), old scrap lead acid battery casing that are ground up, and all the random plastic that gets sorted by colour alone. Mixed up, moulded into inside parts where not seen, and you often see marbling on them where different colours were not fully mixed

@LFTRnow Год назад

Perhaps the contamination, is actually there on purpose to help add balance to the toy

@tylerhagen3068 Год назад

Glad to see you back, great video as usual and appreciate the effort put together to share your experiments

@walts555 Год назад

👍Always love how you describe some of the mundane tech challenges, 32b tiff, image processing, etc.

@skuzlebut82 Год назад

You actually x-rayed your finger in action. That's awesome man!

@jamescollier3 Год назад

I kept cringing

@skuzlebut82 Год назад

@@jamescollier3 Meh. If there was a huge reason for concern, Ben would most certainly not do it. In the video, you could also clearly see the flesh of his finger, so they're low energy x-rays. They are x-rays none the less and all ionizing radiation is bad, but, I trust his jidgement.

@i_might_be_lying Год назад

There is also possibility to x-ray the "other" finger. I mean, for science...

@bobweiram6321 Год назад

@@skuzlebut82 Exposure time also plays a major factor. X-rays exposure is usually a fraction of a second.

@jamescollier3 Год назад

@@skuzlebut82 I'm sure you are correct, but

@Wander4P Год назад

This is so awesome. This channel is always fascinating. I often rewatch videos several times.

@hzmeister9596 Год назад

I was actually thinking about you a few days ago and wondering what you were up to and when you'd make another video. Glad to see you're still uploading. This was awesome as always. Looking forward to the next one.

@appleater3 Год назад

I always look forward to these!

@leastexpected3115 Год назад

Fascinating theme. Can't wait for another video of this sorts! Oh and as programmer and Linux enthusiast I'm fascinated with the technical setup. I can't even imagine how hard it is to debug all of this ordeal

@electronicsNmore Год назад

Really good video. Seeing how things work without taking them apart, and just looking what's inside objects or living things is always exciting. Big thumbs up!

@dav1dbone Год назад

Always look forward to watching Ben's videos.

@BastiaanEkeler Год назад

Very interesting, thanks for showing this to us!

@babylonfive Год назад

Healthcare Triage call-out! Nice.

@mxlje Год назад

Your videos are always the ones I look forward to the most.

@thetruthexperiment Год назад

I like how this expensive piece of equipment is encased in what looks like a student grade poloroid camera case.

@Dudleymiddleton Год назад

I didn't know that about the jumping beans being light sensitive - fascinating!

@enilenis Год назад

Recompiling 32-bit TIFF's and imagemagick. Yes. I recall writing software for a LIDAR a decade ago, and I also ran into the difficulty, so I had to run separate scripts for each colour channel, and then, recombined the image in the end into 32-bit out of 4x 8-bit matte passes.

@forivall Год назад

As mainly a software person, learning that an old, simple format like 32-bit tiff isn't supported by imagemagick was the most surprising thing for me in this video.

@_spartan11796 Год назад

It's always great to see you post!

@ddogg9255 Год назад

Wow those are some spirited larvae! I thought it would be cool to open a soda can but realized those were metal so it wouldn't work...then realized they sell in plastic bottles too 😂 Maybe a computer fan would be cool to see the bearings, or an old-fashioned metronome

@0neIntangible Год назад

I'd like to see a disposable lighter as the butane changes to gas at ignition port.

@TheOceanLoader Год назад

Super cool fun with x-rays. They are not as dangerous as people think - AS LONG AS the x-ray passes through the patient's body. I remember being worried about the overuse of x-rays in dentistry and orthodontics. Turns out I was worrying unnecessarily. In the early days, they wore these heavy, lead infused, aprons. These stopped the rays, but actually risked more damage.

@thepjup4507 Год назад

just incredible, as always.

@RC-1290 Год назад

A couple of years ago I wrote a tiff importer for Marmoset Toolbag 3, using libtiff. When you use that library, it quickly becomes apparent why tiff is sometimes referred to as "Thousands of Incompatible File Formats". Besides high bit depth images, its support also goes back all the way to 1 bit images, with various types of compression (or lack thereof), and file layouts. Programs often just seem to implement a few specific variations.

@pavelperina7629 Год назад

Yeah, TIFF is more a container for images and metadata and than a format. Not many people realize that even that container can have two byte orders and either 32 or 64 bit offsets. Then add ability to contain multiple images at different resolutions, possibly independently compressed stripes or tiles, compression can be LZW, Deflate, (less common is JPEG or basically anything) like 20 commonly found metadata records (tags) describing width, height, number of bytes per pixel, number of channels, meaning of channels, ....) and then some less common, but important for some applications. Not to mention that some programs are using these metadata creatively, so you can find SEM image with 254000dpi (example - 10000px/mm or 10px/um or 100nm/px - not even high resolution 2000px wide image shows 0,2mm). And fun starts when you try to use TIFF for storing extremely large images in tiles - any program that opens it may try to read all data, display that image and either crashes or consumes a lot of memory. Fileformat itself allows it, problem is that most programs ... ehm ... none .... could handle some extreme use cases.

@astruxium Год назад

This is so cool, I hadn't seen X-ray video at all before and the high speed is incredible

@PabloEdvardo Год назад

Extremely cool. I'm so glad you've still got a lab and you're still doing stuff like this.

@landonkryger Год назад

You should join the Safety Third podcast for an episode. I'm sure they'd love to have you on.

@3ormore887 Год назад

Always a great video!

@pjmoran42 Год назад

Can you capture xray emissions from "cracking your knuckes"? Apparently that's a thing.

@thewolfin Год назад

or the ol "peeling scotch tape in a vacuum"... Some of these Dectris units are vacuum compatible!

@questy44 Год назад

Ah I just responded this, but you were faster :)

@mikeissweet Год назад

Awesome bit of kit, there!

@ChongMcBong Год назад

awesome thanks to Dectris for sending this to Ben, send him more stuff please :)

@jannejohansson3383 Год назад

Mr. Science, you're one luckiest guy in world of electronics and physics and you grow your hungry every month and suprised all of us. You are serious innovator of future Mr. Science juniors! You have make effect that never goes away, no matter if you stop everything today, BUT, PLEASE DON'T DO THAT!! Keep going and create ideas that anyone cannot even imagine. It isn't problem for you, and you enjoy everything all this. And get own counter that is in your pocket full day, and write down every day how much you get that dark power.. (: Thanks man! You're God of technics.

@AlexBayes Год назад

Your videos are so unique and enjoyable to watch - thank you 👌🏻

@evolicious Год назад

Literally the coolest thing I've ever seen on this channel!

@mikebarnacle1469 Год назад

hm, he has a delorean

@jesseadamczyk1745 Год назад

This is a very cool video! Thank you for sharing this Ben. I hope that you can get ahold of the super high-speed X-Ray detector. Looking forward to the what else you come up with!

@BCGARAGE853 Год назад

Honestly I get so excited when I see a new upload. You could literally just post any old video talking about anything mildy unique or interesting and we'd be watching it! Okay now to watch this video lol

@123smartcontent Год назад

That was a fascinating vid! Thanks for having the idea to do this, it was quite interesting.

@joblessalex Год назад

You always have the coolest projects.

@RicardoJunqueira Год назад

This was AWESOME!

@muninmatt Год назад

I don't care how "safe" you may think you are... You are BEGGING to create an insect-themed supervillain!

@ERKNEES2 Год назад

Dectris MVP! love that they are letting you use this!

@ZestiaPlayMinecraft Год назад

I paused as you went along and did the steps myself and that helped a TON.

@oisiaa Год назад

Your videos always get a thumbs up from me automatically within in the first 2 seconds!

@sapient_design Год назад

I've been patiently waiting for this exact video

@eimantasb5535 Год назад

Very interesting and cool. Thank you!

@shinyless Год назад

I love this channel so much.

@PetWanties Год назад

Awesome video and awesome device! So cool they loaned one to you.

@longshot789 Год назад

Awesome, as always.

@jonathankr Год назад

What's so impressive is, you not only understand the physics,and mechanics and electronics of it all, but you are able to figure out the computer technology to solve your problem

@nasonguy Год назад

My wife and I were literally just talking about getting the kids some Mexican Jumping Beans. Then I picked up the phone and boom. High speed X-ray of Jumping Beans…..

@vectrexer Год назад

Awesome video. YUM ❗. Thanks for great info to go along with the visuals.

@BCH320 Год назад

ImageJ and FiJi (Fiji is Just ImageJ) is a wonderfull tool-box for image analysis and processing. With it you can even export an image-stack as a video.

@bussi7859 Год назад

Great as always

@mylestechnological7031 Год назад

Excellent video as always can’t wait to the next video

@danielbrowniel Год назад

When I was in school we would bring in stuff to xray. One student brought in his pet turtle, that was one of the coolest things I've ever seen.

@aktik6000 Год назад

Its been a long time, Ben! Nice to see you again!

@joppepeelen Год назад

Jees always amazed about your knowledge ! its sick. really enjoyable !

@MrEwilliams2 Год назад

Love the coffee mug. Also great to see more exciting videos. Always look forward to your videos 😁

@davidbwa Год назад

you demonstrate a lot of interesting toys. thanks

@DextersTechLab Год назад

As ever Ben, you just one over everyone else. You work on another level!

@brandonb3279 Год назад

Awesome! Fantastic content as always, thank you! And thanks to Dectris for lending that instrument. Here's my request for them to lend you the largest sized one!

@yodaco Год назад

I'm always impressed by how well this man is able to explain such complex subjects without being boring at all and even entertaining. A very rare talent.

@MikevanMeer Год назад

Amazing video again!

@wilso72940 Год назад

That’s insane! Keep up the great work!

@richierich7721 Год назад

Always such interesting content thank you .

@badtrip801 Год назад

I've been waiting for another video thank you sir

@SuperBrainAK Год назад

yes more please!! that is super cool!

@ryanatkinson2978 Год назад

Thank you for explaining the jumping beans!

@JesseSchoch Год назад

Thanks for sharing Ben!

@emilalmberg1096 Год назад

Once again you show something like no other!

@eduardoanonimo3031 Год назад

As an engineer specialized in human interfaces, this camera have a huge value. Be able to watch the biomechanics of the bones and tissue paired with the mechanics of a switch, push button, know... open the door to a whole new level.