Nach 1-Sekündiger Brückenbildung am micro-USB-Port und 4 Stunden OP "am offenen Herzen", den Patienten immer mal wieder zwischendurch zusammengeflickt um festzustellen, dass sich da immer noch irgendwo eine Brücke eingeschlichen hat ist die Drahtlosladung endlich fertig und funktioniert! =) Vielen Dank für die Super Anleitung! Ps: Als blauen Leiter / thin wire habe ich "Wrapping Wire" mit Kynar-Isolation genommen... hab Ewigkeiten gebraucht, bis ich das Zeug aufgetrieben hatte... ;-)
Well it seems that you'd need to find the right pin to solder to, in this case with the micro usb connector, it should be the same as other phones. Only things I can think would be difficult is making sure you have enough of a gap between the battery and the cover for the coil and how you're going to route the wires.
Why not direct onto the battery? You get external chargers right? But I guess the combination of battery and induction power flowing to the phone is too much right?
Hi qinqin. Ich habe mal ne wichtige Frage: Wie groß darf der Abstand zwischen dem Handy und dem Touchstone sein damit es noch lädt? Bei manchen Geräten wie Apple's Wirelessladegerät für die Magic-Mouse, ist ein nicht aufgefaltetes Taschentuch schon zu dick! Kannst du mal testen wie groß der abstand sein darf bzw. ob es mit einem Case noch geht?
is this mod compatible with any Qi charging dock? tylt? I have a nexus 10 and want to modify it but due to the size of it, I want to put two separate coils in the back cover to make sure I can hit the sweet spot in portrait or landscape.
If you connect directly to the battery you will be bypassing the charging circuit which will damage your battery as the current will be unregulated. Those external battery chargers that you are referring to have a charging circuit built into them.
Im thinking of doing this with my Atrix HD MAXX. im wondering why in the annotations you say not to let it touch the card holder but in the video that's where you placed it anyway?
They have qi enabled charger ports now for USB just plug into usb and attache to back of mobile with tape. Buy wireless charger and it should work. Downside: Can't use USB port (computer transfers) USB charge voltage (about 15% an hour) For me the fact that I don't have to fiddle with a wire outweighs the negatives. I just pop on wireless and go sleep, get up to a full charge. Search on eBay "Universal QI USB charge" or something similar.
I have this mod on my phone. Charging inductively and plugging in the USB will in fact charge your phone at double speed. I have done it many times with no problems. Be warned that your phone will get pretty hot though.
English: I put this where it broke the cable soldered. where I can solder the cable yet? German: ich hab diese stelle kaputt gemacht wo er das kabel anlötet. wo kann ich das kabel noch anlöten?
sharven solo www.ebay.co.uk/itm/Certificated-Qi-Wireless-Charging-Receiver-Coil-fr-Samsung-Galaxy-S5-i9600-Green-/261466378064?pt=UK_MobilePhones_MobilePhoneAccessories_MobilePhoneChargers&hash=item3ce09c4f50
i managed to break the flex cable for the power button dong this, and by a stroke of bad luck also snapped the leftmost pin from the inside of my micro usb port. not to mention the fact that the inductive charging plate thing didnt even properly fit under the back of my vibrant. /sigh/ so much bad luck in one day.