That’s an easy ass install. After watching your videos and seeing how incredibly simple and easy the CF’s are to work on, you just keep making me want one more and more. Can’t wait to get my CForce 600 Touring. God bless you and yours and stay safe!
I just picked up my cforce 800 3 weeks ago and so far Im definitely Liking it as far as cf moto you don’t stay in business since 1986 making crap and KTM well I never owned or road one but from what hear they make some bad ass machines
@@RealTalkPowersports I've been watching you rip trails non stop👍. I'm looking into purchasing my 1st ATV a Cforce 500.... then put it on 28's and get the clucth. My wife says we're getting her the 600 next😎. Thanks again for all the information. We're from SE Louisiana and hope to experience some of those beautiful Mississippi trails.👊
Looks tough lifted with those tires not to bad to install. The DNR here told me even those passenger seats r illegal here in Mi..on state trails but they let u ride 2up at the county orv park..but another good video blake keep on rolling...
Hi! I enjoy every single video of yours, keep up the good work!!! I know it's a frequently asked question but, will it fit on a 450L ? I heard that the 400's and the 500's have the same chasis, and the arm looks the same i guess!!! Please let me know
Thanks so much... And i wish i could give you a 100% sure yes.. but i havent done it for myself.. but like you said the 400 and 500 chassis and suspension is all the same so in my opinion it has to work
Really great job, your videos are amazing! I’m looking to install it into my CF520L (2up) year 2022. Do you believe it will work? Do you know if there are some wheel spacers for the front ones as well? Congrats from a CF Fan from Brazil!
I'll look into doing that.. I've seen several people say they change theirs out from what comes in it. I'll have to see what kind everyone is swapping to and I'll try to make a video on it.
I have the cf 400 on 27" outlaws 2s ..I called highlifter and jackrabbit there is no lift for the 400 but the 400 and 500 have the same set up do you think it would work?
I have a friend that has the 400 model.. it may be a week or so but I will try to get him to bring his 400 over and I'll see if it will work. But you may be right.. if the a-arms are the same then I dont see why it wouldnt work
I found one in this site and will be ordering it next week. They said it will fit the 2021 Cforce 800xc. atvbox.eu/lift-kit-cfmoto-x8ho-cforce850-850xc-x10.html
My CFMOTO CForce 500 brake lights don’t work. Neither front or rear brakes work. I replaced every fuse and relay under the hood and nothing. I only get running light voltage to rear light connector but no power at the connector for brakes. Any ideas?
@@RealTalkPowersports thank you very much for answering back thinking about getting one I have a Kawasaki brute Force 300 now with a solid shaft and I went riding last time and it beat me up like crazy going to get the brute Force to my oldest son
Question...I've got a 2018 CForce 500S but when I go to HighLifter's site they don't list any lift kits for the 18/19/20 model years. Is the kit for the 500HO the same? I'm only questioning because the 2018 500S and the 500HO have different control arm and front strut/shock part numbers. I also emailed HighLifter and they said they don't have any kits for the 500S but only for the 500HO. Any info is greatly appreciated...also big thumbs up on the channel. CFMoto content and equipment is hard to come by but happy to see you pushing a lot of content on the CFMoto brand.
Hi figured I'd comment back to myself (haha) but to help future questions from others about this lift for the "CForce 500”. I bit on a black friday sale from Highlifter and finally had sometime for the install last week...things that I learned. First and foremost, this kit from Highlifter is designed with the 500HO in mind instead of the 500s. The front lift brackets from Highlifter work BUT do not sit square on the tops of the control arms but rather "float" to a degree where they would sit square on the 500HO arms...the HO uses different front control arms which I verified by part numbers. When searching the web and RU-vid, you'll see that there are other "brands" of lifts out there from Poland, Russia and other bigger CFMoto markets for the 520L (similar to the 500s in the US/Canada) and those are of the same design where they float and not sit square on the tops of the arms. Now the 1.5” wheel spacers included are not needed on the 500s from what I saw as there is no clearance issues with the factory 12" wheel and control arms....but adding them does offer more stability. With that said I bought another set of 1.5” wheel spacers for the front to keep the stance "equal" distant when comparing to stock. If I were to do it again, I'd purchase 1" wheel spacers and throw those in the rear and move the 1.5” wheel spacers to the front to get it an equal poke past the fenders as the 1.5” at all four corners makes the rears poke almost 3/4” more than the fronts with the same size spacer. Either way I got the same 1" inch lift on my 500s as shown in this video and the ride feels a tad bit stiffer but then again I can't really tell as I noticed the tires where at 4psi instead of the 6.5psi before the first ride on the lift so at the same I adjusted that...I might drop it down to 5psi for the next ride. Now I'm debating on whether or not I should do 27” Bear Claw HTR's vs 26" as the 27's are actually almost a pound lighter per tire than the 26's. My trail riding is a lot of single track dirt/rock/roots with some small "puddles/water crossings" so I'm not looking for crazy big tires with big "paddle" like tread....need more of an all around thread.
I run the stocks most of the time.. but I did buy system 3 xm310s for when I'm going mud riding. I'll comment 2 links to some videos of it. No mods needed
@@tredaze212 In the thumbnail its a 14" System 3 wheel with a 5+2 offset. And the rims in the video with the XM310s are 14" ITP Hurricane Wheels with 5+2 Offset
Guys I need some help I got a 2019 Cforce 500S I like the Mud Lite XTR Radial Tire planning on running 27x9-14 at the front and 27x11-14 on the back both 5+2 due to the type of trails we ride but cheese I'm having a really bad time finding wheels for this tires online any suggestions? Thanks
@@RealTalkPowersports I'm assuming that it will fit my 600. It looks like the suspension setup it the same. The only difference I see between the 500 and 600 is that the 600 is a 2up.
Larry I cant say for 100% sure.. but I believe it would. But I've never looked at the suspension setup of the 2019 style 600. But I suspect it's a lot like the 500
@@RealTalkPowersports before I seen this comment, I sent a message through their website asking about the 2021, then seen your comment and made the order. Today a sales rep emailed me and said it wont work :(
That is a Moose rear cargo lounge.. but I personally would recommend you look into the WildBoar atv rear seat.. I think it's better and you can order it on amazon
How are these CFMoto Atvs holding up after a few years? I was looking at purchasing a CForce 600 this week, just not sure how well they hold up. Any info would be great!
Well I have only been a owner for a year and 3 months now and I own 3 and love them!! Just go thru my channel and see all the videos of them over the year and that should help a little
@@wonderview9984 When you order this kit they only include spacers for the rear and you only need those spacers if you are running 12 inch rims... but we ended up removing those spacer when we went to a 14 inch rim with a 5+2 offset
Real Talk Powersports oh ok, I still have the factory rim for both ATV 500 and 400, would recommend putting spacers front and rear on them or just rear?
Hey bud. I called the store you have in the description. But they say the customer build the lift kits .. I'm not sure why .. but these pieces of what your putting in . Should all be the same.. . . . How can I obtain this ?
@@RealTalkPowersports I found this website. I did purchase the rear cargo box for my atv .. its coming from russia .. I think I'll be purchasing the lift kit from then I guess.. the only thing is that I don't want to wait for so long. . This is the website. atvbox.eu/
