No video :(

HITBOX HBM200 MIG MMA TIG Review & unboxing

Подписаться 22 тыс.

Просмотров 22 тыс.

50% 1

In this video I REVIEW and UN-BOX - HITBOX HBM200 - multi-function welder
HITBOX HBM200: amzn.to/487ks8B
Newer release HITBOX HIM200: amzn.to/4avgiJV
Buy Harvey a Coffee: ko-fi.com/hatb...
Please Like this video:👍 httpMULTI-FUNCTION WELDERs:// • HITBOX HBM200 MIG MMA ...
Please subscribe to this channel:👍 goo.gl/eubNMd
Please share this video:👍 • HITBOX HBM200 MIG MMA ...

I thank all you guys for watching 😎. Please let me know if this video helped you and what you think in the comments below and don't forget to like, share and subscribe for more escapades of HatBoyHarvey in the next video release,
(Oh and he’s the rabbit in the video if you’re wondering)
The content of this video is for information and entertainment value only and it's creator makes no claims, promise or guarantees of it's accuracy, coverage, instruction or adequacy of the procedures contained therein.
HatBoyHarvey assumes no liability for property damage or injury incurred as a result of any of the information contained in this video.
HatBoyHarvey recommends correct safety practices when working on motor vehicles, vehicle lifting tools, axle stands, hand tools, electrical equipment, chemical, products and consumable parts, lubricants or any other tools, equipment, chemical product and consumable parts, lubricants seen or implied in this video.
No information contained in this video shall create any expressed or implied warranty or guarantee of any kind of expected result including any injury, damage or loss that may result from improper use of the information contained in this video and the use of any tools, equipment, seen or described in this video and is the sole responsibility of the viewer and user and not the creator of this video and HatBoyHarvey.
Music: Race_car / Bill Higley - Mini Vandals /Tonto - Silent Partner / youtube_audiolibrary / also music by Audionautix.com is licensed under a Creative Commons Attribution license (httpscreativecommons.orglicensesby4.0)Images licenced under creative commons attribution license by 2.0. To view a copy of this license, visit creativecommon...

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 64

@philby49 2 месяца назад

I am amazed your extension lead didn't go up in smoke, being wound like that will get super hot and you will lose power, needs to be fully unwound, otherwise a great informative vid and I have just ordered one, Cheers.

@HatBoyHarvey 2 месяца назад

I'm not too bothered about the extension lead, (your right, but negligible effect on an inverter welder I would have thought) but thanks :-)

@FixMyBrokenJunk 5 месяцев назад

I love these cheap little welders for working on rust removal, interior floors etc. I got this one yesterday and was very careful to not break anything, if your gentle these little machines can last a long time, for $90 usd it will pay itself off in the first couple hours

@HatBoyHarvey 5 месяцев назад

I thought the very same when I bought it and immediately saved money on a car that would ended up on the scrap heap if it weren't for this little guy :-)

@davekauffman8727 5 месяцев назад

I bought this model on ebay, but wired for American outlets. There is no gas connection for MIG or TIG welding, unfortunately, I guess I'll have to contact the manufacturer about the proper conversion.

@HatBoyHarvey 5 месяцев назад

Yes it is a no-gas unit which keeps it compact for mobile operations. |t is very easy to put it into the trunk and take anywhere. The welds are a little harder compared to using with gas and |'m not sure how you would convert it, presumably you would need another mig or tig torch :-)

@thebunz7 6 дней назад

Mine penetrates like crazy. Burns through sheet metal at 20amps just stitch welding.

@HatBoyHarvey 6 дней назад

Something not correct there. At 200 Amps it may well do that, but not 20 Amps. You must have it set up wrong or the machine has a fault, if the latter contact the seller.

@duncanvincent9106 2 месяца назад

I bought one and it was dead on arrival. Didn’t turn on. Got a replacement and that worked fine. My 0.8mm tip was too small for the wire to push out, so I had to enlarge the hole slightly. Works fine. The quick lock was a bit iffy. Would be nice to have a table for amp settings but I guess I’ll have to play by trial and error.

@HatBoyHarvey 2 месяца назад

Thanks for sharing your thoughts and experiences, best of luck with further welding :-)

@kevstamc3676 6 месяцев назад

Thanks a lot..i just purchased one of these and ive never welded before..im looking forward to using that mig and now i know to set it between 130 and 160amp for my car 👍

@HatBoyHarvey 6 месяцев назад

Cool, good luck with it, hope you get to master it, takes time and practice, whatch videos to help. you will have to play around with the setting at bit and start off on clean metal clamped together. Don't burn or blind yourself in first month and you will become a welding god :-)

@bittertruth6575 8 месяцев назад

Very nice review. I bought one of these a couple of months ago but only got around to testing the flux/mig welding a couple of days ago. I have to say, it works really well. Very nice clean welds at 120A. Very little spatter too. The only thing I would suggest is to make sure to have a clean surface for the ground/earth clamp. If you are welding dirty metal, it's better to give it a little clean with a grinder first. It will produce less splatter and should use lower Amps as well. I'm looking forward to trying the stick welding next. I've been looking at getting 6013/7018 rods.

@yungmelodyyy7127 6 месяцев назад

6010 is good for rust it’ll eat thru anything

@deniegaelizalde1518 8 месяцев назад

I just bought this hitbox welder a few days ago, because of your vlog that i can see this is a good quality welder. And it's fine when I use it, it really works on its purposes..

@HatBoyHarvey 8 месяцев назад

Great, I think it's a good little thing also for not a lot of money, hence the review :-)

@jordanwhelan8285 25 дней назад

How is it after few months

@neilfoster814 Месяц назад

I've just bought this welder off Ebay, mine seems to be a "Mk2" version with a nicer MIG torch. Mine came with 2x shrouds, 6x tips (4x 1mm, 2x 0.8mm). They look to be a great little gasless MIG/MMA/TIG unit for £80. I already have gas MIG, and stick/carbon arc welders, so not quite a total beginner, so looking forward to trying this welder out.

@HatBoyHarvey Месяц назад

Thanks for sharing that 👍

@My_man_G_UK 3 месяца назад

Just came here to check what this can do as my mate has bought me one for my birthday! 😮 What a mate, i know right!! This video was of great help but i think the print on the box for spool installation could be a little clearer. But looks very handy to have being gassless too. Currently at the end of my welding course so will be looking forward to getting this used. Great to hear a fellow Yorkshire man doing the review. 👍🏾

@HatBoyHarvey 3 месяца назад

Thanks and Happy birthday! Good luck with finishing the welding course, now the real work will commence :-)

@duncanvincent9106 2 месяца назад

Great little review. Thanks. Nice to see you testing too. Oh boy!!!! Rookie mistake with the wire!!!! So sorry that happened…. It is always an issue with mig welders. ALWAYS. Hold the wire until it’s under tension in the feeder..😊 I never take the paper or plastic off the wire spool until it is in the feeder and locked in.

@HatBoyHarvey 2 месяца назад

Thanks and thanks again for the tip will do, duly noted :-)

@AboveGroundLevel. 9 месяцев назад

Nice review on the welder. Still looking forward to I a potential cambelt change on the little fabia if that's in the making soon. ATB for the weekend.

@HatBoyHarvey 8 месяцев назад

Thanks. Me to, it needs to be done, sorry I haven't done it yet, but will ASAP :-)

@Hu6uinho 7 месяцев назад

Thank you, I will buy one hitbox hbm 200 i´m a begginer in all this welting world

@HatBoyHarvey 7 месяцев назад

All the best, hope you get to master it, it will take time. Practice on new metal cleaned up with wire brush. Watch RU-vid videos on welding :-)

@adamb5142 9 месяцев назад

I was going to ask your thoughts on this, but you beat me to it. Thank you for this :)

@HatBoyHarvey 9 месяцев назад

Glad I could help :-)

@Lorant1984 19 дней назад

Can i run this from a standard uk household socket without killing my circuit or burning my house down, please?

@HatBoyHarvey 18 дней назад

Depends on your individual circuit demand. Just because something has a plus does not mean the circuit can take it. Quick guide: Ampsx230V=power which should less than the protective device (fuse)

@Lorant1984 18 дней назад

@@HatBoyHarvey Thank you. That's the answer I have been looking for. Great video as well!

@jackkollan 5 месяцев назад

Got one yesterday, and it kept tripping the circuit breakers. It eventually powered up and when I tried to do a weld smoke started pouring out of machine, I plugged it out fast. Returning it tomorrow.

@HatBoyHarvey 5 месяцев назад

Sorry to hear that, mines fine :-)

@abdulkhan-gq5nh 4 месяца назад

flux wire comes out very fast and unable to control the length and speed

@HatBoyHarvey 4 месяца назад

Speed is controlled by the amperage so as long as you strike-up it should feed the wire sufficiently. Difficulty occurs when you pull the trigger you need it to strike up, if not you end up with too much wire. It's definitely a 'knack' to get right and not to everyone's skill set whereas with a gas shroud it is much easier. Practice is key, keep cutting the wire to length when it feeds out too much, and practice with short efforts.

@stratospherical777 Месяц назад

Great video thanks mate i just purchased one as my previous didnt arc, set this one up exactly like you but still cant get an arc, have tried connecting the earth to different metals but nothing, fear im oing something wrong, only my 3rd time welding

@HatBoyHarvey Месяц назад

No sure what you are doing wrong, all metal must be connected to earth and not thick rust. try tapping it near the earth or on it to strike up first.

@stratospherical777 Месяц назад

@HatBoyHarvey thanks for the advice mate and the reply too it's appreciated:) turns out I didn't have the earth close enough 😂 felt a bit silly but I'm still novice :) thanks again mate :)

@HatBoyHarvey Месяц назад

@@stratospherical777 No worries, now you can start to enjoy learning how to weld, best of luck :-)

@craigrjrich 19 дней назад

Looking to get into welding so this may seem a silly question for some but to use the tig setup is gas required?

@HatBoyHarvey 18 дней назад

TIG can be done gasless, but imho not very well compared to a gas setup. Gasless MIG is better, not perfect, but cheap and easier to set up :-)

@craigrjrich 18 дней назад

@HatBoyHarvey Thank you for the reply. I have ordered this setup so can this one take gas for tig or is it completely gasless?

@renedecosta1218 7 месяцев назад

Parabéns pelo vídeo eu estava indeciso se esse HITBOX ou um outro da marca ZXVOGEN, mas agora eu já sei que esse é top. Já vou me inscrever em teu canal. 👍👍👍👏👏👏

@HatBoyHarvey 7 месяцев назад

Obrigado, espero que o vídeo ajude você :-)

@syedalam3513 День назад

Hi basically i bought this to do floor work on my car what setting should you recommend to stay for floor welding and body paneel work thabks

@HatBoyHarvey День назад

Use a thicker gauge sheet for structural areas, say 1.2mm + whilst none-structural panels 1.0mm. I think I used 160 Amps mostly, but go as low as possible to start with to get used to how the weld burns into the base metal without going through. The rustier it is the harder it is to control a good weld without going through.

@syedalam3513 День назад

Thankyou so much for fast reply what size tip you are using as well there are 3 of them also did you make any adjustments on wire speed

@HatBoyHarvey 9 часов назад

Wire speed is fixed and related to the current. I changed the tip to match the wire size, something I first checked, just insert the wire in the tip first before mounting the spool.

@Dave_889 6 месяцев назад

nice video, I am about to purchase one of ebay and wanted to see what it can do. Also I am new to welding.

@HatBoyHarvey 6 месяцев назад

Great, it's a good little device to start on, best of luck :-)

@Dave_889 5 месяцев назад

I purchased and received it a few weeks ago and its awesome. @@HatBoyHarvey

@km_youtube23 4 месяца назад

Thanks for the review mate on the newer version they sent me but same model the dial can be pressed and change from amps to something that goes -3 to 3, any idea what this does? Thank you! Need to sort some sills!

@HatBoyHarvey 4 месяца назад

Sorry not sure yet, been thinking of this, but haven't found out what it means yet :-/

@gyorgyvarga7721 4 месяца назад

I just bought such a welding machine. The MIG set only works in MMA mode. Should I send it back?

@HatBoyHarvey 4 месяца назад

There is a selector button to scroll through to mig setting, make sure that is correct and you have connected everything right first.

@markwebb9730 4 месяца назад

Great video, very helpful. Would this be suitable to join a 2mm steel frame at corners? Intending to make raised garden beds but never welded before.

@HatBoyHarvey 4 месяца назад

Absolutely. But gasless mig is a bit Slattery and needs more practice to get good welds IMHO. The welder comes with MMA stick welding which would work well with new steel frame metal, but not aluminium.

@markwebb9730 4 месяца назад

@@HatBoyHarvey From what I have read it seems the Flux Core welding will be better for 2mm and not so likely to burn through?

@HatBoyHarvey 4 месяца назад

@@markwebb9730 you can control the ampage so no worries with that, if it looks like you are going to burn through - turn the current down. It is the way to control the amount of penetration you need for the weld. Always practice on a similar setup with scrap metal before attempting the real thing. Good luck with your project :-)

@alexzaitsev6036 3 месяца назад

мои 3 копейки: ru-vid.comO6xssB2deFo

@HatBoyHarvey 3 месяца назад

ссылка не работает

@agnosticevolutionist3567 7 месяцев назад

Rubbish welder nothing but problems the mma stockholder fell apart and the wire jammed ,and no extra wheel sent it back

@HatBoyHarvey 7 месяцев назад

Thanks for the comment, appreciated whether good or bad, honest experiences count in this world and sorry to hear you had trouble with it as I've had none so far and really like it :-)