Тёмный

HJ212 Full Teardown Tutorial: Main Bearing & Seals Replacement ⚙️ Hamilton 212 Jet Rebuild (Ep.2) 

Jet Boat Mayhem
Подписаться 889
Просмотров 4,8 тыс.
50% 1

Hey Jet boaters! Welcome to Episode 2 of this series. Today we will get into part two of our Hamilton 212 teardown rebuild tutorial.
➡️ We will also get into the rebuild procedure and some tips and tricks that may help along the way.
Everything went pretty smooth in Episode 1, but that doesn't last long LOL.
In part one we began tearing down the 212 pump in my Wooldridge Super Sport Drifter after it experienced main bearing failure.
➡️ In this video, you will see some snags that occur while trying to change the main bearing and seals.
If you’re looking for a full guide on Hamilton 212 main bearing replacement, look no further than this tutorial.
Be sure to watch the entire thing to catch a few tricks and tips about making this repair happen!
💬 What did you think of episode two of the Hamilton 212 rebuild? Let us know in the comments below.
I appreciate every thumbs up and would love it if you’d consider subscribing to the channel!
👉 / @jetboatmayhem7271
Don’t forget to share with your friends who own one of these awesome jets!
Thank you so much for visiting 👋
********************
⚓ Welcome to the official RU-vid Channel of Jet Boat Mayhem ⚓
If you are looking for a channel to give you info on all things jet boat-related, this is the channel for you.
➡️ Jet Boat Mayhem makes content for people who love jet boats. Jet Boat Mayhem channel’s content will answer all your questions regarding jet boat repairs on common jet pump models, as well as go over modifications that can help you optimize your jet boat’s performance
You will also get to see fabricated models as well as adjustments to popular tools used for modifications by jet boat enthusiasts.
If you’re looking to build, modify, optimize, or repair your jet boat, this is the ultimate hub for you.
➡️ Or if you’re just wanting to see modified jet boats in action, this channel also has you covered.
If you’re looking at getting into jet boats, this channel will answer all of your questions and help you get the information you need to get started.
🎬 Subscribe to the channel and hit the bell to never miss a new video 🔔
********************
#Hamilton212 #HJ212RebuildTutorial #JetBoatMayhem #Hamilton212JetPump #RepairingHamilton212

Опубликовано:

 

28 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 14   
@lancemanins5082
@lancemanins5082 2 года назад
Awesome work , Id been looking for an instructional so I can pull my 212 apart which is running behind a 389Chev... Looking forward to the next installment.... whoop whoop...
@jetboatmayhem7271
@jetboatmayhem7271 2 года назад
Lance that's epic! I'm so happy this is helping you out! All the videos will be uploaded in the next week or so! Be sure your subscribed and have notifications on so you don't miss any of them!
@MrTurboTurkey
@MrTurboTurkey 2 года назад
Buddy..... Shaft/water seal/bearing assembly comes out from the front and is retained in a stack by the main bearing retaining nut..................
@jetboatmayhem7271
@jetboatmayhem7271 2 года назад
I found that out :-) Thanks for all your comments, I do appreciate it for sure. I could definitely do this in a fraction of the time now that Ive done it, but as a first timer i definitely did some things the hard way lol I do appreciate subscribers like you who give great supplemental info in the comments and help out all the jet boaters who stumble onto my video. I appreciate you adding value there! Have a great one!
@GaryCritchfield
@GaryCritchfield Год назад
Brother, thanks for doing this video. I pulled the cotter pin without removing the shaft😢😢 My engine was removed being beefed up... should have removed the whole shaft forward and done it on the bench😂😂😂 but... not a slam, we live and learn! Thanks again for the video.... by the way, I used a floor jack through the clear out hole! Toughest cotter pin I've ever seen in 40 years of aircraft maintenance!!😂😂😂
@jetboatmayhem7271
@jetboatmayhem7271 21 день назад
Holy cow no kidding right! Those cotter pins are no joke! I did my best on this, and I'm glad it helped! I think just seeing someone else do it is really helpful 🙂 happy to do it! Glad you got it worked out!
@Beammer1972
@Beammer1972 2 года назад
Great video! How long until you load the next segment? I've just blown the shaft seal on my 212 (LOTS of water leaking)...
@jetboatmayhem7271
@jetboatmayhem7271 2 года назад
Oh dang Derrek! That's no good, sorry to hear it! I'll have them all uploaded on the next few days! Episode 3 launched tonight incase you missed it here's a link! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-MsVlPh52i3o.html
@rodneyleatham8519
@rodneyleatham8519 2 года назад
The mechanical seal first part you pulled out (black) if carbon and the second part (white) is ceramic. When you put it back together it’s a good idea not to touch mating surface and keep clean.
@jetboatmayhem7271
@jetboatmayhem7271 2 года назад
Thanks for that tip! Great information Rodney!👍
@rodneyleatham4838
@rodneyleatham4838 2 года назад
To easy mate, doing a great job. I have a 19 foot ski boat with a 212 and turbo prop. Engine is 400ci SBC, dart block, heads about to convert it over to a roller cam and efi
@jetboatmayhem7271
@jetboatmayhem7271 2 года назад
@@rodneyleatham4838 that's a killer setup! I'll be doing the same thing on mine, needs more power! What kind of speed do you get out of that setup?
@rodneyleatham4838
@rodneyleatham4838 2 года назад
90km/h with 100L of fuel and 4 adults atm
@jetboatmayhem7271
@jetboatmayhem7271 2 года назад
@@rodneyleatham4838 heck yeah! That's moving pretty good! I'll be doing that this winter after fishing season 😍 thanks for the info!
Далее
Трудности СГОРЕВШЕЙ BMW M4!
49:41
Просмотров 1,4 млн
Катаю тележки  🛒
08:48
Просмотров 445 тыс.
Against The Flow - the Hamilton Jet tale
1:01:09
Просмотров 119 тыс.
ALT Drift How-To
13:36
Просмотров 2,9 тыс.
Hamilton waterjet manufacture & assembly
1:30
Просмотров 101 тыс.
Many Moving Magnets Melting Metal
20:21
Просмотров 2,9 млн
Jet Boat Impellers Solas Versus Hamilton 4.0
1:49
Просмотров 4,6 тыс.
Changing Impeller on Hamilton 212 Pump
9:58
Просмотров 3,8 тыс.
Трудности СГОРЕВШЕЙ BMW M4!
49:41
Просмотров 1,4 млн