HK416 A5 Gen3 by VFC - key difference and disassemble (airsoft replica) || RU subs 

🤣🤣🤣

Was about to say it. That's way more important than the single piece valve knocker imo.

Same here

No change. Now I added a ra-tech bolt carrier, so it is heavier. But for my HK417 I kept a stock lightweight bolt carrier, so I changed a buffer to heavier. Also if you want to play in winter, you need a weaker spring. Plan to make a video on how to make GBBR work in cold weather.

Yes

Yes bro it is

keep tuned, next video will be about how I deal with it

Not if you have dropped the hammer

@@larshenrik8900 sorry, that's wrong. You can put it on safe, even with the hammer down

@@bullet94400 not a real 416, you cannot put a hk416 on safe if the trigger has been pulled and you havent charged the bolt

@@larshenrik8900 yes you can put it on safe at any time

@@larshenrik8900 "The weapon can be set to safe in the cocked or decocked state at any time."

late response but it should be adjustable out of the box, it come with aadjustable NPAS system out of the box

@@FirelixGaming Gen3 from taiwan doesnt

Just change the rocket valve or drill/tap a hole on the stock one for a screw

Seems a bit weird, my gen 3 still got a npas

You and its easy

@@SkinRangeris yours the asia edition?

No shaking at all. If you have any shaking, try www.midwayusa.com/product/100340833 (you can find the same but cheaper on Aliexpress).

@@e-not Thank you

Mine's a bit shaky as well, it doesn't rattle but it's noticeable.

You can fix the wobble between the upper and lower with o-ring, ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TpPDQzfonYg.html

at least a new firing pin and drill lower receiver to fit it

Definitely don't drill your lower receiver. You can keep your valve knocker assembly as it is until it breaks (it may not). Then switch the stock assembly for an ESD single piece valve knocker assembly. It requires no modifications on your lower and is basically the same as the VFC gen3. You also need to get a new gen hammer if you don't have a hammer screw. And you don't need any bolt modification since it is the same as the gen2 (if not worse since the gen2 had the NPAS).

Firing pin

@@e-not XD worth the 150€ price diff

@@e-not Did it fix the barrel shroud that pointed the innerbarrel slighly curved?

@@shari0n Ngl, buying an ESD single piece valve knocker assembly + a gen3 hammer costs 70 dollars in Taïwan stores without shipping/customs

It’s like 500$

It’s stupidly easy to change for one. Heck you could take the stock rocket valve and drill and tap a hole for a screw and boom, you have a npas

@@opairsoft8100 DIY NPAS ftw