Holey Plugs, Batman! But... what are they for?

Подписаться 2,3 млн

Просмотров 5 млн

50% 1

The answer may surprise you.
Links 'n stuff
I've made a playlist of my various electrical shenanigans. You can get to it here:
• Electrical topics
Technology Connections on Twitter:
/ techconnectify
The TC Subreddit
/ technologyconnections
This channel is supported through viewer contributions on Patreon. Thanks to the generous support of people like you, Technology Connections has remained independent and possible. If you'd like to join the amazing people who've pledged their support, check out the link below. Thank you for your consideration!
/ technologyconnections
Oh, and look at these wonderful patrons!
Cody Bittle, Patrick, Andrew Hoddinott, Benjamin Rister, Shay Sandik, Patrick Kennedy, Jesse S, Oswyn Brent, A tall shade of the color red, Colin Gagich, Mike McCaffrey, Mike Olpin, Michael Steinmetz, Andrew Krew, Devedander, Bryan Countryman, David McGrath, Richie Gaiser, Benjamin Albert, Truls Zhong Konstali, Cuervo , Mauve Co, Martin, Eric Graves, Philip Cheek, Alexander Schlickenmaier, Jesse Weaver, Thomas Kula, Ed McCloskey, Harold Godwinson, Jordan DeLong, Keith Hemenway, Aaron Greenberg, Matt Brown, mooncow , Oliver White, Andrew Eslick, Brent Medling, Joel V, John Harris, Mike and Zack, DCBuffalo, Emilio Mendoza, Patricia , Cody, Colin Coyle, Cuddlefisch , nate grover, Martin Smith, Darryl !, bagel mode, DankPods, Ian McDougall, Derek Watson, Marten van Wezel, TJ Zimmerman, Dan Barrett, Kristofer Luck, SingleMaltSloth, Tennavan, Corey W. Anderson, Aaron Teague, Nathaniel Caza, Andrew Chappell, Sammie Mammel, Serge Wroclawski, Matthew Hackbarth, Joel Neatrour, John Zelinka, Jimmy Albin, Jordan Thoms, Bob Leonard, Erik Victory, Andre Alforque, Kevin , Roger Hosey, Paul HW, Anthanasius, Steven gindler, Matt Keaveney, Keegan Carter, TJ , Zengwish, Bennett Colesberry, Ivan Avdeev, Ron Thomas, John Haager, Melody Olvera, Joshua Nahum, Chris Galloway, Sobol, cyberstorm, SHAUN, Keith Chang, Brad Feehan, Mitch Brunner, Eric Rakestraw, Brett Caven, h2g2guy , Charlie Davidson, Noah W., Matthew Abbitt, Thomas & Robert Rhode, Steve McClellan, Nitin Dahyabhai, Dennis Morhardt, Scott Albertine, Jelle De Loecker, Michal Miškerník, Ry Biesemeyer, NobTinker , Devin Edwards, Randy Messinger, Seth Persigehl, Piro606, Nathan Friedly, Robert Hausner, Matthew David Chapin, Bill King, Roadrunner 531, Gareth Brown, Butter Penguin, Maarten De Rocker, John Whitaker, João Pedro Francese, Joseph Russell, Mike Richards, ZGryphon , Eric Walter, Andreas Trottmann, Lee Sweet, Justin Zakrzeski, Artem Leshchev, Jared Julien, Max Maguire, Gunnsteinn Þórisson, RandallA, John Heavisides, Rob Newman

Наука

Опубликовано:

8 окт 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 15 тыс.

@TechnologyConnections 2 года назад

Maybe some day I'll talk about the fact that all these outlets are technically upside down.

@Qsie 2 года назад

I mean...

@SkippyDa 2 года назад

That's also a misconception, it's only upside down in some states and uses, it's not standard in the NEC code

@dspiffy 2 года назад

Are you on Electrician Talk? I've referenced your videos there. The general consensus is in favor of pin down.

@TechnologyConnections 2 года назад

No I'm not on Electrician Talk, but I've noticed that pretty much every commercial building I've run into lately has them installed ground-up, and the printing on every receptacle I've encountered is right side up only when the ground pin is on top. Even the GFCI outlet shown here with the power switch, which is ~ 10 years old, has the "TR" logo upside down because it was installed ground-down. For the record, I don't care about this, and until manufacturers of 90 degree cords and wall warts start making them to work with ground-up installations I'd still want the standard "face" orientation in my home. But it seems pretty clear that it's frowned upon, if not explicitly wrong.

@SkippyDa 2 года назад

@@TechnologyConnections it's so when a liquid spills on top of it it touches the ground first, and then the hot or neutral.

@fredflintstone505 2 года назад

My son discovered a great use for the holes. You can insert a small paper clip through both holes at the same time so when dad unwittingly plugs it onto the wall, it emits a bright blue/white flash and scorches the plug, wall plate and wall as well as tripping the circuit breaker all with an incredible but brief sound.

@drewm8502 2 года назад

Jesus christ that must have been terrifying for you considering you come from the stone age

@AndreLyons 2 года назад

RIP son.

@fredflintstone505 2 года назад

@@drewm8502 Absolutely terrifying! :)

@user-hw4st7br9a 2 года назад

The clips are probably generating electrical/current arcs

@joshuaflackua 2 года назад

lmao

@KurosakiYukigo 2 года назад

"I suppose mayonnaise is an off-white jam..." Sir, I'm going to have to ask you cease this train of thought *immediately*.

@rosskwolfe 2 года назад

Jam is made from fruit. Mayo is made from eggs.

@g.m.2427 2 года назад

@@rosskwolfe Eggs are chicken fruit

@shawnerz98 2 года назад

@blalo'u You didn't stop it soon enough! Next, someone will say it's actually jelly! Oh no!!!

@lilylopnco 2 года назад

@@g.m.2427 I... can't say that's wrong exactly...

@rosskwolfe 2 года назад

@@g.m.2427 So babies are people fruit?

@Tymibaman 9 месяцев назад

"I suppose mayonnaise is an off-white jam" is one of the most upsetting sentences I've heard in a while.

@trickvro 9 месяцев назад

But is it an instrument?

@molybd3num823 9 месяцев назад

@@trickvro definetly

@KarenSDR Год назад

When I was a kid, back in the 1960s, we had a record player that would shock you if the plug was upside down. Touch the tonearm and get shocked. It made playing records an adventure. I don't think we ever told our parents. I haven't thought of that in decades.

@AnimationByDylan 8 месяцев назад

In those days, if you lost a kid, you'd just make another one.

@maxwellhesher1790 22 дня назад

@@AnimationByDylanIn my mind, you’d make both another kid and another plug. Gotta get that sweet sweet US patent. Edit: for the plug that is….

@rocbolt 2 года назад

The hole is for the tiny padlock to prevent someone's PlayStation from being plugged in :D

@volvo09 2 года назад

My mom would take the cord to my nes / sega. Haha

@simonupton-millard 2 года назад

I was thinking that as well I know moms who would have done that but we are in the uk so they just cut the plug off

@lyrooo326 2 года назад

My grandma even locked the TV.

@parca95 2 года назад

Mom did that once to my ps2 joke's on her my printer used the same cable so i just swapped them

@ToxicAtom 2 года назад

actually, that's not too far off. It's not too common in residential/consumer use, but Lock Out/Tag Out (LOTO) locks are frequently used in industrial settings to ensure that heavy machinery isn't plugged in and turned on while someone's inside doing maintenance.

@theprogrammer32 2 года назад

"through the magic of buying multiple" will never get old I swear

@Emppu_T. 2 года назад

It's like cooking shows when they've already made the oven cooked thing.

@karl-linusamsler836 2 года назад

Except when he does not: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-udNXMAflbU8.html

@theprogrammer32 2 года назад

@@karl-linusamsler836 a terrible oversight on his part :(

@xSaraxMxNeffx 2 года назад

yo this comment chain went places O_O

@jaredraszewski8909 2 года назад

@scrumbles 11 месяцев назад

Fun fact, if you have one of those tiny novelty padlocks for a girls' diary, you can lock it through the hole, preventing it from being plugged in.

@johnf817 Месяц назад

Weirdly specific...you can just use a zip tie or literally anything else

@scrumbles Месяц назад

@@johnf817 um, it's pretty easy to "unlock" a zip tie. What would be the point?

@donaldwilliamssr.6350 18 дней назад

Correct 😊

@markhiscock5530 11 месяцев назад

Those holes are very useful in the construction trade for me. Not only can you lock out a plug, but we own Pro-Lock extension cords which seem to utilize these holes to lock whatever you've plugged into them in place.

@JaximusDecimus1 2 года назад

"Dude, no way I'm watching a 20 minute video on the holes in power plugs." ~20 minutes later. "He got me again!"

@jeffflowers5489 2 года назад

Thank you! (See my comment)

@earthlingjohn 2 года назад

The bloopers at the end always make it worthwhile

@MikeWallaceDev 2 года назад

Yep. Exactly what just happened to me at 2:30 in the morning. He got me again!

@jeffflowers5489 2 года назад

@@earthlingjohn Well, I knew the answer and I just couldn't stomach his usual string of puns, so I skipped it.

@jeffflowers5489 2 года назад

He's a good guy, but he has a knack for taking 20 minutes to give a 1-minute answer, riddled with countless gut-wrenching puns. Sorry. I chose the other pill this time. #Matrix

@MucaroBoricua Год назад

Back in the 80s when I was a child, my parents would put a tiny padlock (like the ones used on luggage zippers) through the holes in my TV's power cord as punishment. So I always thought the holes were to prevent unauthorized use of appliances.

@sjmphotonyc Год назад

Did drabbit make Krav for mits!?

@Acontador13 Год назад

lockouttagout holes

@mernok2001 Год назад

You should have just replaced the plug if you couldnt remove the lock.

@thierryfaquet7405 Год назад

@@mernok2001 back then most appliances had fixed power cord.

@TsengFayt Год назад

My parents went a step further and just took the power cord for my PlayStation as punishment in the 90's. Joke was on them however, we had a VCR that used the same polarized C7 connector as the PSX, which I used to game on until they came home from work.

@Silvermoonshadow Год назад

Mayonnaise being called an off-white jam has ruined my brain. Lmao 🤣 I love the information TC gives, but the jokes just make this channel peak entertainment ❤️

@Reubenhubert 3 месяца назад

Is mayonnaise an instrument?

@TheGuyWhoIsSitting 9 месяцев назад

I have lived in a few rental properties with what I always called “butter plugs” most of them were quite old and probably had dozens of people living there over the decades. And well, as you noted in the end, probably just wear on the sockets. Never to the point where they would fall out without help but they usually weren’t hanging on very well. The US has so much cheap crap nowadays. I had a unit where one of the light switches was sparking when I tried to turn it on and off. One unit the fuse box was sparking randomly. Apartments use all the cheapest things in them. It’s genuinely terrifying to think about.

@Staratopia 5 месяцев назад

What's scarier is a lot of newer homes are also built with cheapest options with the expectation that who ever buys the house will remodel everything, but the buyer isn't informed of just how much they should remodel. This especially seems true for low income houses in cases where the buyer will be less likely to afford the remodel.

@clottadams5028 4 месяца назад

@@StaratopiaJust replace them next time you paint the room.

@rylieread1865 4 месяца назад

I have encountered sockets where plugs absolutely would not stay in the socket. It's especially problematic with heavier plugs like USB cubes, scent plug-ins, or those big boxes with the lil wire coming out (as you can see, I'm layperson 😅). You plug it in, and it slips right back out without even touching it. I believe I've had some in my apartments (up in Indiana, don't think I've struggled in my place in Georgia, but I've only been here about a year), and I've absolutely struggled in hotels/motels. I think he addressed this in a later video and hypothesized it was due to such frequent use, which I'm inclined to believe. I typically go hunting for a socket that sticks, or I have to get an extending cord and plug everything there. Actually... now that I think about it one of my current extention cords is very buttery (thank you for the new lingo!), and my phone chargers are constantly coming out, and that sucker is parallel to the ground and command stripped to my night stand at head level, so there's no wild angles putting unnecessary strain on the plugs!

@Vinemaple 3 месяца назад

Nowadays?? This has always been a problem in the US

@ryanbecker6584 2 года назад

The opposite of “through the magic of buying two” should be “through the misfortune of only buying one”. 😀

@jacksong6226 2 года назад

Get the spammer outa here

@AaronOfMpls 2 года назад

@@jacksong6226 On desktop: mouse over the comment, click the 3 vertical dots, then "Report". Then choose the reason (I went with spam).

@technopoptart 2 года назад

@@AaronOfMpls it is technically considered pornography, spam doesnt even get removed except by the channel's moderation

@andrew_ray 2 года назад

"The toads over at NEMA" is an unreasonably good joke.

@Ugly_German_Truths 2 года назад

but nematodes are not reptilians...

@syriuszb8611 2 года назад

@@Ugly_German_Truths Neither are toads... Toads are amphibians.

@Ugly_German_Truths 2 года назад

@@syriuszb8611 Damn, i wanted to type amphibians ... no idea what i was watching at that moment, the TC video was already finished... must have been good to distract me so much. Meh, won't correct it now you already did.

@paulhaynes8045 2 года назад

Not if you're not American and have no idea what NEMA is!

@_mnejing 2 года назад

@@paulhaynes8045 The joke doesn't need you to know what NEMA is though. It's literally nematodes, and that's a delicious pun.

@inatew 5 месяцев назад

“Oh well, at least it’s not 240v coming out of there” 😂😂😂😂😂

@AgentAileron 3 месяца назад

In Australia our plugs and receptacles have angled live pins, so they are always polarised correctly since they cannot be plugged in upside down (even if no grounding pin is present) 🙂

@holyhalfdead 3 месяца назад

And you can bend them so they are not angled to use them overseas!

@Dblue-rhino 3 месяца назад

pretty big tho

@noahf.3990 2 года назад

"Through the magic of buying 2" will never not be amusing to me.

@northofnashira2575 2 года назад

It's better than the full "through the magic of buying 2 and being able to write off both on my taxes" tag line.

@thecutestpariah 2 года назад

Fun fact: there are extension cords that utilize those holes and will lock with a button on top. They're great with hand tools to avoid accidental unplugging while working

@isleofnature 2 года назад

I was just going to comment that! I'm curious if the lock actually indexes with the holes or if it's a tighter friction lock?

@bux77 2 года назад

Came here to same the same thing, I in fact used it today with my grinder

@rocksntwigs 2 года назад

I've literally never seen these in the US. I had to go to Japan to see them for the first time.

@dantruong849 2 года назад

@@rocksntwigs Don't know about the US, but extension cords with locks are fairly common in Canada. Some have the button lock/unlock as Patrick mentioned, and some have a sweep lock.

@a89proof 2 года назад

Came to say the same thing - I've got replacement cord ends that lock into the holes for retention. Works great for power tools in lieu of switching everything over to the superior twist lock plug and outlet.

@mythoceanas8874 10 месяцев назад

I worked at a plant where they put plastic ties through the holes on malfunctioning or under maintenance piece of equipment. Usually with a tag with a initial, date and reason, so the equipment couldn’t accidentally be plugged in.

@terrycummings81 8 месяцев назад

Lock out Tag out kits have locks that lock onto plugs using the holes on the plug for putting the device out of service when broken. we used them at work.

@AllButJustForgotten 2 года назад

"It typically takes decades for a receptacle to wear to that point" *laughs in cheap apartment*

@isaacstevens1912 2 года назад

Sameeee

@captainsergeant 2 года назад

Our house was built in late 2003 - just as all manufacturing moved to China. I've had to replace every receptacle that has seen even moderate use.

@Platypi007 2 года назад

Yup.

@danielfay8963 2 года назад

As someone who recently moved into an apartment with really bad outlets, learn how to replace them. It's honestly really easy if you're even moderately handy, and not at all dangerous if you just turn off the breaker before working on anything (I cannot stress this enough, get an outlet tester. For like $10 you can get a tester that will tell you if an outlet has power and if its wired correctly). The actual parts are like $1-2 each, for like $10 I replaced all the worn out outlets in my apartment, and now none of my plugs are falling out.

@daboross2 2 года назад

Yeeep.

@BloodWolf2005 2 года назад

"It's always been like that, no one knows why." Reminds me of an anecdote. A little girl, seeing her mother cut off the top ¼ of the Thanksgiving turkey, asked why. The mother said, "I don't know, my mother always did it." After thinking about it, the mother wanted to know, so she called her mother (the little girl's grandmother) and asked. The grandmother said, "I don't know, my mother always did it." After thinking about it, the grandmother wanted to know, so she called her mother (the little girl's great grandmother) and asked. The great grandmother said, "I did it because my baking pan was too small."

@Copyright_Infringement 2 года назад

Mind if I steal this story for use elsewhere? It's very good

@BloodWolf2005 2 года назад

@@Copyright_Infringement Have at it. It's not my joke. There's probably many variations of it, but the punchline is the same.

@clxwncrxwn 2 года назад

Ha! Women. They don’t change.

@jsax01001010 2 года назад

@@Copyright_Infringement I've heard many versions of this story. I'm not sure anyone knows who wrote the original. I also find it ironic that someone with your username would bother to ask.

@tsm688 Год назад

version I heard is, never leaving stuff in the kitchen without a bowl on top. Daughter doesn't know why, but keeps up the habit through adulthood. One day she asks, and is told "because we had cats".

@jimdeboer84 Год назад

Thought I knew all about home receptacles. Man, was I wrong! Great video! Your format is perfect. Don’t change a thing. Very clear with just the right amount of explanation.

@revenevan11 Год назад

Thank you for the reminder that I *really* should get around to replacing the loose outlets in my old room back at my dad's house 👍 I suppose they got a fair bit of use, over around a decade, but I'm still surprised that they're apparently so worn that I've actually had a plug fall out with barely a tug 0_0

@astrotrance 2 года назад

"...mayonnaise is an off-white jam." Never say that again.

@dmeemd7787 2 года назад

🤣

@josephking6515 2 года назад

_...mayonnaise is an off-white jam._ 🤭🤭🤭🤭🤭🤭

@zarlus8 2 года назад

YES. Didn't like that. I didn't wake up today thinking I'd have to contemplate my definition of jams. He can keep that opinion in his pocket.

@herrpez 2 года назад

Then what is it? It's the best explanation I've heard so far, and if you have nothing better to offer... do try to live with the knowledge that I will spread the word of the off-white jam! ;)

@zarlus8 2 года назад

@@herrpez you stop that. Call it a puree, pudding, paste, or a weak flan, but a jam it shall not be. 😜

@Liamtronix 2 года назад

I actually have an extension cord with a tiny lever which, when turned, pushes a pin through the holes, so whatever is plugged into the cord can't come unplugged. Very handy for electric lawnmowers!

@pixels2polygonss 2 года назад

I have a similar extension cord. It locks both male and female sides together so it doesn’t accidentally get unplugged!!

@wolverinechris2 2 года назад

That seems like a safety hazard

@WREFMAN 2 года назад

@Enderlance why?

@kalim4835 2 года назад

@@wolverinechris2 then again, you could also unplug the extension cord itself.

@scotty4421 2 года назад

bros got a wired lawnmower lmao

@jeff911p 5 месяцев назад

never new this channel existed and is pretty good so far. relaxing tone learning a few things and funny from time to time. I like it

@AngryBob4213 7 месяцев назад

I definitely love all the information you give and the science you do but god damn, your sense of humor is next level and your deadpan delivery is impeccable!

@The8BitGuy 2 года назад

Very intersting. I've actually wondered this exact thing before. I tend to agree with your hypothesis that it is a cultural thing, like when Motorola put a fake antenna on their flip phone because they said it didn't look right without it.

@wallacegrommet9343 2 года назад

Or Buick exhaust ports. Stick em anywhere

@CanadianBakin42O 2 года назад

Oh it's the iBook Guy

@steeviebops 2 года назад

Another example is UHT milk in refrigerators. It doesn't need to be refrigerated, but it doesn't sit well with Americans so they do it anyway. In Europe it's just put on a regular shelf.

@mattcrooke8321 2 года назад

@@steeviebops it’s fine on the shelf before it’s opened, but it’s supposed to be refrigerated after opening.

@ryanmitcham5522 2 года назад

@@mattcrooke8321 Exactly, so it doesn't need to be kept in a refrigerator in the store. Lots of things need refrigerating after opening.

@Hawk7886 2 года назад

"The toads over at NEMA" is such an incredibly underrated line!

@MrEazyE357 2 года назад

Is it a riff on nematodes?

@antiphon000 2 года назад

The video's been out for less than 24 hours... how could any line be underrated?

@jfo738 2 года назад

C. elegans is my favorite species of nematode

@ZeldaTheSwordsman 2 года назад

@@MrEazyE357 Yes. It's even a setup line for a later payoff

@anne-droid7739 2 года назад

@@jfo738 Is Arabidopsis thaliana your favorite flower? =D

@GMack523 Год назад

This is the first video that I’ve seen by this creator and I have to say that I was immediately drawn in. The presentation and cadence reminds me a bit of an Andy Rooney segment from 60 Minutes. I’m now subscribed and looking forward to even more great content!

@Vinemaple 3 месяца назад

Hmm, now Imma have to go check out Andy Rooney

@ADOENDRA Год назад

These mysterious holes are part of the pin production process ( production in product ) these pins are made from a long flat strip. The holes are a part of the feeding system to the stamping mold. They act like a gear feeding the strip into the STAMPING mold, BUT they also guarantee the exact length according to spec. ( length tolerance ) These tricks are often used in mass production.

@mattjhsn 8 месяцев назад

this.

@John60s70s 7 месяцев назад

I think you meant blades. The flat blade plugs have holes at least here in America. I don't think the pin type have holes. I was also thinking of those foreign plug adapters. I think some countries are using pin plugs.

@mattjhsn 7 месяцев назад

@John60s70s I think he meant bladeish pins. Except for the ground, those are pinish pins. :) 😁

@JariJuslin 6 месяцев назад

@@John60s70s : In electrical connectors a male contact is a pin, regardless of shape.

@nitehawk86 2 года назад

"Mayonnaise is an off-white jam." has "Hot dog is a sandwich" energy.

@kingsteegg 2 года назад

Well said.

@cmelton6796 2 года назад

pfft Hotdogs are German tacos

@afrog2666 2 года назад

@@cmelton6796 lol, German tacos xD

@LuisGonzalez-dr2im 2 года назад

Hot dogs are sandwiches.

@googiegress7459 2 года назад

@@cmelton6796 Sandwiches are sauerkraut

@SMATF5 Год назад

I think I just always assumed that the holes were a cost-saving measure - it's only a bit less metal, but even something like 5% less material used in manufacturing adds up over millions of units.

@ryanschmidt1437 Год назад

Those blades are most likely manufactured by a subtractive manufacturing process called punching; a positive shaped punch (looks like the blade) and close-fitting negative die come together from opposite sides of the sheet stock and shear through it faster than you can blink. Subtractive manufacturing means you start with more material than you need to make the part; the extra is waste. Sure, those hole blanks are a tiny bit less material in the useful part, but that waste material required energy use to melt, cast, and roll it into the sheet stock that blade was punched from, and the waste has to be recycled in order to be useful again later, thus requiring application of energy twice before becoming an actual part. Then there's the energy it takes to punch it out, just to "throw it away"; not much energy in the scale of things, but not negligible. It also requires more complicated tooling design to remove the material, which isn't cheap either, in both production and maintenance. Depending on the type of punch press blanking the blades out, the holes may either be a second punching operation, a complicated concentric 2-stage punching die, or a die set through which the material advances, simply being struck twice in different areas of the die. Manufacturing processes always require time and energy to perform, which costs money, so removing that material has to serve a purpose or the energy expended on the feature is a waste of money.

@ratkingcrab Год назад

@@ryanschmidt1437 your response makes a lot of sense. is it possible that the material from the holes is simply more valuable than the energy cost of recycling the 'waste' parts created by punching them out? making it more cost effective to punch them out and melt them back down than to buy new material over time?

@yonason6047 Год назад

lol I should have read yours before my reply. I had thought if someone had said thr same as I that he’d have been further down the list. 😁

@ADOENDRA Год назад

The saving will vaporize with the cost of the tooling.

@Andytlp Год назад

assumed manufacturing just before he said it.

@davidhewson1234 Год назад

Interesting and consise study on holes in plug pins. One thing to add, UK plugs all have third ground pins and no holes. Keep then coming guys. Thanks. Dave

@SPIDERDIAMOND13 Год назад

Some extention cords have a lever that locks your device together so you don't accidentally lose power by kicking the cord out of the extension cords socket. By using those holes with locking pins activated by that lever.

@jaredhenderson2820 2 года назад

Fun fact: Hospital grade receptacles grip the plugs quite a bit tighter than residential or commercial grade receptacles do. Hospitals even periodically conduct a pull test on each receptacle to make sure they are within tolerance.

@Drebin2293 2 года назад

Makes sense. With all that oxygen occasionally floating around I imagine sparks could be a very bad thing.

@Sashazur 2 года назад

You also don’t want various important equipment to unplug accidentally.

@logansutton4464 2 года назад

they also have a redundant ground wire

@dougankrum3328 2 года назад

Dang, beat me to it! And those 'hospital' receptacles are usually Orange....so you know they are high-retention.

@davidjette9915 2 года назад

@@dougankrum3328 hospital grade receptacles are indicated with a green circle on their face regardless of face color. To my knowledge the only face color that matters is when they are red which indicates that it is fed from an emergency source of power. The receptacle will still be live when general power is out in the hospital assuming the emergency systems have functioned properly. I think the orange receptacles you are thinking of are isolated ground receptacles which have an orange face with a green triangle indication on the face. These systems have two grounds. One for grounding metal boxes and raceways and one insulated ground going straight to the ground prong on the receptacle. These insulated grounds are generally treated differently back at the panel than your general grounds.

@tomokokuroki2506 2 года назад

Alternative title: Technology Man makes sure all of the outlets in his house are getting some at least once.

@oskarwinters1873 2 года назад

Alternative title: Man does not know what jam is.

@scythal 2 года назад

@@oskarwinters1873 Eggs are technically chicken fruit. They contain a "seed" inside (the actual chick) and and the egg itself contains the seed, kind of like a fruit

@Zaphod_B- 3 месяца назад

When I was in the Air Force working as a Precision Measurement Equipment Repairman, at the end of shift you were required to unplug all equipment on your workbench. It was a common prank to put a piece of solder through the holes on the next guy’s soldering iron and wait for them to plug it in. Makes for a real wake up call.

@jessv2572 3 месяца назад

The lack of outlits holding onto plugs is definately a huge feature of my childhood home. It's also common on some of my power strips that are less than 5 years old.

@tinncan 2 года назад

In my experience, it's so you can twist bare wires through the holes for extra sketchy situations.

@SproutyPottedPlant 2 года назад

Ahh yes that famous picture of a PlayStation 2 being used this way.

@davidbarts6144 2 года назад

I did that all the time in my misspent youth!

@olmostgudinaf8100 2 года назад

To be fair, that's what I've always assumed they are for!

@paddington1670 2 года назад

lock out tag out

@KevinCrouch0 2 года назад

This comment has me concerned...

@BilisNegra 2 года назад

As a European, I was wondering at the beginning of the video: "How is it possible I've never noticed US plugs are polarized, i.e. they have blades of different size?" A while later it was clear why: All such plugs I've encountered in person (not many, really) were in phone chargers and similar stuff.

@r100curtaincall 2 года назад

Yeah not all of the two blade plugs are polarized. They’re generally only polarized if needed…A lot of modern supplies don’t require it by design, but some items its done for safety. I can totally see why you’d not notice.

@julianstechsation 2 года назад

Lol similar comment like mine spotted, after commenting 😅😂

@frogdeity 2 года назад

I'm American and never even knew that.

@108wee 2 года назад

Its hard to notice even if you’re American. Sure we notice the occasional rare plug needs to play the usb game but you don’t really question it. And just quickly forget about it.

@r100curtaincall 2 года назад

Pretty much. It usually applies to things that have a metal chassis and are frequently touched, especially if they have no surrounding external circuitry that regulates current draw. Things like lamps, toasters, old radios, and such.

@billshiff2060 7 месяцев назад

I am in metal forming and it makes perfect sense to have the holes as a reference point and register to align the blades for molding the housing. A hole is much easier to make and use accurately than the outside perimeter would be.

@DexLuther 2 месяца назад

This video is years old and this has probably already been mentioned, but the holes also save on material. Sure, probably very little, but when you can squeeze a few more units out of a run, it seems like a no-brainer. When you can get an extra blade every 999 or 9,999 blades, it seems worth it.

@nicolascuellonunez812 2 года назад

I love the phrase “by the magic of buying several of them…” gets a smile from me every time 😆

@danielduncan6806 2 года назад

I bet you still giggle at peak-a-boo, right?

@furtislast4920 2 года назад

@@danielduncan6806 *Fun fact:* you don't have to make fun of people for finding something funny just because you don't yourself. (also it's "peek-a-boo" because your peeking at something, not at a mountain peak)

@Archgeek0 2 года назад

@@furtislast4920 Heheh, yeah, "peak-a-boo" just sounds like they're abusing sound equipment.

@ShadowNuke 2 года назад

I got a laugh when I heard it, too!

@steveo7771286 2 года назад

@@danielduncan6806 yes. The answer is yes. 😂

@TheAthooper 2 года назад

"The todes over at NEMA" is a phenomenal joke

@Benny23761 2 года назад

Honestly, my first thought was that I wouldn't be surprised if the entire motivation for creating this video was to be able to finally use that joke.

@ApolloSniperman 2 года назад

NEMAtoads meep meep

@Brindlebrother 2 года назад

terrifying pfp

@stefanmenzel263 2 года назад

@@ApolloSniperman nematODES but what is a todes? or ist it toads over at NEMA?

@ApolloSniperman 2 года назад

@@stefanmenzel263 Toads? Todes? Chodes? At this point, who even knows? Surely not I.

@BabaYaga214 9 месяцев назад

By using a ball bearing inside the outlet, kind of like how a ratchet locks a socket in place, could be a great way to utilize the holes and keep the plug from being removed accidentally. Then when you want to disconnect from the outlet, just press a button on the face to take the pressure off of the ball bearing, which would allow you to easily remove the plug.

@holyhalfdead 3 месяца назад

Ball bearings on reasonable stiff springs would hold the plug in the correct position. The ball bearings and springs do not need to conduct the electricity, the usual contacts would be used for that. It would require the same amount of force to remove it as it did to plug it in, so I don't think a release button would be necessary. This could well have been why the holes were created, but the additional cost of adding two ball bearings and two springs to every socket would be why it never caught on. In any situation you should not pull out a plug by holding the wire.

@stevemcdonald1033 7 месяцев назад

Once, I needed a longer electrical cord and didn't have a complete extension cord to use. The cord I had was missing the female socket. So I stripped the wires on the cut end and used the holes on the male plug's prongs as a place to loop them through for a secured connection. I soldered them and wrapped them with several layers of professional electrical tape which is made of rubber and stretches. I've been using it for years. So I found a use for those holes.

@NoPantsBaby 2 года назад

The holes are for when my grandpa wanted to "get some electric" and he just wound a couple of wires through the holes and suspended the plug between a couple bricks. He lived till 103.

@synapticburn 2 года назад

What do you mean? He plugged an outlet into an outlet to get an outlet?

@BenderdickCumbersnatch 2 года назад

Wait.... what? What did he do with the electric?

@snoowbrigade 2 года назад

@@BenderdickCumbersnatch he got it

@kngofbng 2 года назад

I've done that a few times. Don't know if I'll live to 103, though.

@CaseyShontz 2 года назад

@@kngofbng what does it mean? How do you do this

@OfficialMaxBox 2 года назад

The call and responses with yourself never cease to tickle me. "That's silly. Indeed it is! So was that (w)hole sequence."

@saffroncoasts6950 2 года назад

A man of culture I see

@FlareShift 2 года назад

Sup fellow medic Chad.

@TheHitmanAgent 2 года назад

@@agnez1739 YOU HAVE NO POWER HERE!!! Go back to China, or whatever country you're from

@fierelier7691 2 года назад

uwu

@dominiknovosel883 2 года назад

@AGGREY ESENDI OGADA I feel I should point out that proselytization is highly unethical, not to mention annoying and socially unacceptable if conducted through media not intended for this purpose.

@RandomMichael 7 месяцев назад

Makes it easy to insert test probes to measure resistance of the thing with the plug, also offers a bit of contact cleaning,

@david.e.h. 9 месяцев назад

The worst outlets I've come across, are the ones in airplanes. They more often than not are worn out and the plug wont stay put. You'd think those outlets would be built to a higher standard. I love your videos!!!!

@ShihammeDarc 2 года назад

15:34 ""I'd welcome any nematodes out there to fill us in on any details" is one of the funniest puns on this channel

@seneca983 2 года назад

Though the subtitles render it as "NEMA toads".

@cuttingbored4195 2 года назад

I approve this emerging 'Google gives weird received wisdom rather than factual answers' series.

@professorfukyu744 2 года назад

Google is the ministry of truth. Nothing but bullshit.

@jakeaurod 2 года назад

Goodfact is one thing, but replacing Realfact with Popfact is Badword too far.

@wellesradio 2 года назад

@@professorfukyu744 You’re so edgy. Do you have a newsletter?

@frykasj 2 года назад

Google gives you *an* answer, but usually not the *correct* answer.

@3seven5seven1nine9 2 года назад

@@professorfukyu744 This in and of itself is received wisdom and shouldn't be taken seriously. The generalization makes the whole claim weird and wrong

@johndododoe1411 7 месяцев назад

For manufacturing alignment in molded plugs, having the holes identical across competing pin suppliers is important to get the right size . One way to reduce the risk of touching live is to sleeve the pins like in the 13A British plug and the 2.5A Europlug . This requires the stem of each pin to be slightly thinner so the sleeved part of the pin is no thicker than the exposed tip, thus with folded-over metal, the stem would be narrow and single layer . The length of the sleeves need to be standarsized by NEMA, while the manufacturing techniques would be shared with all other bladed plug types (Australian, Japanese, Chinese etc.).

@russellrichard5773 Год назад

There are some commercial plugs that do have index nubs which fit into the holes. It makes the plug legitimately difficult to get out. They're meant to be used for plugs on the ceiling. It keeps cables off the ground so they're not a tripping hazard and the cables can hang down without falling out.

@orellaminx3530 2 года назад

One of the common uses for the hole is in locking vending machines so they can't be unplugged. And yes, outlets with contact bumps very much used to exist. They tear up your plugs with micro arcs.

@starquestman1544 2 года назад

Yeah I saw the video and remembered that I had an old two prong plug outlet from the 60s in my parts stash, sure enough I found it and tried a plug in it and it clicks into place when inserted. I looked inside and it has the little bumps on the contacts

@TheRezro 2 года назад

Even if, it would be extremely easy to do the same with cheap blocade (I assume you need remove or have specialized outlet anyway) and use is so obscure that having dedicated universal solution is still pointless.

@Chris_128 2 года назад

I use the holes and a small lock to prevent some things from being plugged in. Simple little lock out/tag out for home things that need repair

@markwebb7179 2 года назад

@Indiana Gividen Same here. I have a 100' extension cord with a locking lever that I bought maybe 10 years ago. It's a great feature, because it keeps my power tools from getting unplugged at moments that might become problematic.

@Sparkette 2 года назад

I actually discovered the exact wiring error hinted to at 2:05 in my house, when I was (I think) less than 8 years old. My parents, who knew I could be trusted to stay safe, had given me an outlet tester to mess around with. (I was an interesting kid, and I liked things with lights on them.) I proceeded to plug it into outlets all over the house, much like TC did with the lamp cord, only ever seeing both green LED's light up. That is, until I got to the ones in the basement. When I plugged it into any of those outlets, only one of the green lights turned on, as well as the orange one, which I was excited to see lit up for the first time. "Oh, how interesting," I thought to myself, looking at the sticker with the light combinations to see what it meant. It said that this pattern means "Hot/Neutral Reverse". Now, I had no idea what that meant at the time, but since this was called an "outlet tester", I correctly reasoned that it must mean something was wrong with the outlets. I told my parents, who were previously unaware of this issue. Some time after that, we had an electrician at our house, and one of my parents mentioned this to him. Sure enough, he confirmed (and fixed) the wiring issue.

@bernardorodriguez405 2 года назад

Oh god I read it wrong, and I thought your parents had gave you and outlet TOASTER, and i was imagining you as a little kid running around the house plugging a toaster in every possible outlet.

@MrCrackbear 2 года назад

@@bernardorodriguez405 wtf I made the same mistake and didn't realize it until I read outlet tester for the second time later in the paragraph

@Salsmachev 2 года назад

@@bernardorodriguez405 That is adorable

@unfa00 2 года назад

@@bernardorodriguez405 It's an outlet toaster a fancy name for a U-shaped piece of wire?

@bernardorodriguez405 2 года назад

@@unfa00 I'm gonna say... yes, yes it is.

@luandelata Год назад

In Brazil we developed a design for the plug that is way more secure. The contact will not get eletricity until the plug is fully inserted into the slot that prevents the contact from being exposed.

@dcarrnoir 8 месяцев назад

For those outlets where the plugs just fall out - those are unfortunately incredibly common in low-income neighborhood houses and manufactured homes. Often the houses are in historic districts, usually with very cost-restrictive regulations on how homes can be upgraded. I've seen that far too many times in too many homes, unfortunately.

@richdelgado3405 2 года назад

1921: "In the future, we shall drive flying cars and live on the moon." 2021: I'm watching some guy talk about plug holes (OPTIONAL plug holes).

@TweenkPL 2 года назад

Also 2021: Adam Something posts a video showing why flying cars are not going to happen and would be a terrible idea if they did

@tubester4567 2 года назад

US plugs seem old fashioned. I like our Australian 3 pin plugs with an earth. Its a lot harder to fall out with 3 pins. The 2 main pins are on a 45 degree angle so it can only go in one way and its easy to line up.

@zlac 2 года назад

@@tubester4567 You seen European Schuko plugs? That stuff is inserted in the molded plastic hole of a special shape on the sides, held by two ground prongs on top and bottom AND two normal contacts so it's total of 4 point. I've seen people pull the whole (incorrectly installed) outlet out before that thing gives! :D

@benholroyd5221 2 года назад

@@zlac I see your euro plug and raise you The Great British 3 pin. If things go completely to pot, we'll be able to trade them for their precious metals.

@naturally_rob 2 года назад

Me: "Why is there a 20 minute video about two holes in plugs?" Also me: "imma watch the whole thing"

@finalvistas9087 2 года назад

Listen, I have sat and listened to this man read the manual to his microwave for 30 minutes. He has an incredible talent for making the banal interesting and engaging.

@naturally_rob 2 года назад

@@finalvistas9087 haha absolutely! He has a wonderful talent! His videos pair well with my ADHD. I'll be out in my day, think of something about a mundane object. I get home and find he's got a video on it. A legend.

@watomb 2 года назад

Sure everyone was thinking the same thing. It’s to bad plugs with out holes look cheap

@I_Have_The_Most_Japanese_Music 2 года назад

It has over a million views

@andrewcz8871 2 года назад

Basically.

@MTNMN 7 месяцев назад

“I suppose mayonnaise is an off-white jam.” How dare you make me go the rest of my life knowing this order of words.

@AlexSchendel 5 месяцев назад

My house had builder's grade outlets from the 90s and in just 20 years they were all worn to the point of not providing any friction to hold the plug... Over the course of a few years I've replaced a handful of them one-by-one until I finally just went and bought a cheap multi-pack... Probably not the best receptacles, but they seem a lot better than the ones we had in there and are working well so far haha. You mentioned that they should last "decades". I don't know if 2 decades is within that expectation, but hopefully these new ones will be a little more durable.

@samariamccord4302 2 года назад

"Mayonnaise is an off-white jam" is my new "Sneezing isn't normal"

@TechnologyConnections 2 года назад

I never sneeze.

@krispockell685 2 года назад

@@TechnologyConnections it's unnatural

@ZGryphon 2 года назад

As a kid, I remember being told in health class that the reflex to close your eyes when you sneeze is there because if you didn't, your eyeballs would pop out. Which is a hell of a thing to drop on a ten-year-old with seasonal allergies.

@korkee1111 2 года назад

@@TechnologyConnections Witch!

@jonathanowo7584 2 года назад

@@TechnologyConnections ey VB watchers

@lumanaughty1025 2 года назад

When I was a kid, my dad put a mini pad lock through the TV plug to stop us from watching it. This is also how I learned to pick a lock with a paper clip.

@jerryfacts9749 Год назад

Excellent explanation in this video. I did electrician training during the mid 1960s. The basics are the same, but the devices and some of the standards have changed since then. I am in my 70s now... I have bought some devices where there were no holes in the plug contacts. From what I was taught is inside the outlet are a small rise or bump or dimple inside the contacts that squeeze the plug contacts. This offers a bitter grip to help prevent the plug from falling out of the outlet. There are some types of socket units where the contacts are without any bump or dimple inside. The pressure of the contacts is holding in the plug contacts. The idea of the polarized plug is to have the ground on the chassis or frame side. Fully electrically isolated devices where the electronics inside are electrically floating technically don't need a polarized plug. Many of the small wall chargers don't require a polarized plug.

@charlesrelefordjr5481 7 месяцев назад

I live in an 1800 house which had old knob and tube electrical the used to be a little metal wall plate with hooks on it so you could hang the cords from the eyeholes . Back in the day they didn't have off and on switches on appliances or devices when you plug them in they were always hot so I'm pretty sure they just use them to hang the wires up to get out of the way and they could quickly just plug it back in plugged it back in when they needed them. I'm pretty sure they didn't have to find the plug head or unwind the chord time they wanted to plug in their toaster cuz it didn't have an off switch

@TheGrinningViking 2 года назад

I wouldn't say that taking an outlet apart is dangerous, I'd say taking a mounted outlet apart is dangerous. Buy a new one that's not attached to anything and you can mess as much as you want

@SimonBauer7 2 года назад

just turn the breaker off and verify with a tested voltage meter that there is no voltage present

@theendofit 2 года назад

if you put it back together and try to use it as normal it can be dangerous if you fd it up. thus its dangerous

@christo930 2 года назад

The alleged "bad design" of our plug is just ridiculous. That little stunt at the end, I've never seen anyone do it. I can ruin any plug you show me if I determined to do ridiculous things. It's just like our allegedly bad 120v standard for appliances. Never seemed to have caused me any trouble in my 50 plus years. The only negative about it is for dumb ideas like electric tea pots. But high power devices can work fine because 240 is an option and most houses have them in certain places where high power devices will be, like a stove where natural gas is not available.

@larryroyovitz7829 2 года назад

@@theendofit Well you'd have to be an idiot to do that...well...yeah, you're right. Someone WILL do that. lol

@DasAntiNaziBroetchen 2 года назад

Are you crazy?! It could still be filled with electricity!!!

@massimookissed1023 2 года назад

"The toads over at Nema." So that's where Nema toads come from. Makes sense.

@minerkj 2 года назад

Amazing!

@TranceMissionAerie 2 года назад

LoL! My first thought was it was a reference to the British dish, Toad-in-the-hole, but I have no doubt "nematodes" was his thought.

@jackfrost4408 2 года назад

Anyone remember Doug?

@terryboyer1342 2 года назад

@@jackfrost4408 Patti Mayonnaise was hot!

@bene6270 2 года назад

I actually have an extension cord with a tiny lever which, when turned, pushes a pin through the holes, so whatever is plugged into the cord can't come unplugged. Very handy for electric lawnmowers!

@kristenwalsh9347 Год назад

I just wanna say I love your videos and I hope you continue to make them for a very long time!

@benderrodriquez 7 месяцев назад

I always wondered why Australian plugs have the blades angled inward, and when you mentioned your plugs being polarised a light bulb lit up!

@davidbroadfoot1864 3 месяца назад

That form factor is used in Australia and in China.

@LandauTST 2 года назад

"All your years of watching Technology Connections, what have you learned?" "...Mayonnaise is an off-white jam."

@apollo1573 2 года назад

Yes lmao. I really paused it and asked myself if it was really a jam for a minute

@tonym2328 2 года назад

Egg jam!

@bene6270 2 года назад

I actually have an extension cord with a tiny lever which, when turned, pushes a pin through the holes, so whatever is plugged into the cord can't come unplugged. Very handy for electric lawnmowers!

@oscarteran7734 Год назад

Growing up in a developing country, I always saw those holes being used to hook/attach/tie bare wires for quick connections. I never questioned that purpose until I became fully aware of how dangerous that practice is!

@jackdaniels8105 Год назад

Holes are used to separate tip from the rest of the connector. In other words holes are to create fuses: if wire is shortened and you insert cord into outlet tips make contact and metal around holes melts like fuse.

@cupuacu4life13 9 месяцев назад

The us is a developing country, you're from the us?

@flyingsky1559 8 месяцев назад

@@cupuacu4life13 He means like brazil

@cupuacu4life13 8 месяцев назад

@@flyingsky1559 owie

@nathanieldebarros3849 7 месяцев назад

I’m younger so maybe it’s different, but we used type n or type c plugs without holes.

@G6JPG 7 месяцев назад

Brit here. Until this video kept coming up (and yes, I've now given in and watched it), I wasn't even _aware_ that (a) US plugs _had_ those holes (b) they were polarised; I think the only ones I've seen have been in adapters or multi-country plugs, which mostly don't. As for being able to touch the live pins of a partly-inserted plug, ours - both the old round-pin (commonly known as "5A" and "15A"), and the more modern square-pin (BS1363, commonly known as "13A") - had the same problem. A revision introduced in I think the 1970s "shrouded" the part of the "pins" closest to the plug; obviously that means the actual pin was thinner, but by that time, fewer appliances were drawing the full 13A (in fact the plug seems ridiculously oversized for the majority of appliances), so it wasn't the problem it might seem (though for kettles and heaters that still draw the maximum, good quality plugs are needed). I think it's now actually illegal to sell anything with an unshrouded plug, though you may still find some in some second-hand shops. I don't _think_ it would be practical with the already-thinner US pins ("blades"), but it might be possible to add the extra on the outside - but then some older sockets wouldn't accept the new plug blades. (I did wonder if at some time homes - and workplaces - might start to come with a lower voltage as standard, with the high one for just hight-demand purposes: when that seemed possible, 12V might have worked. [Now probably 5V.] But I guess the extra wiring complexity hit that on the head.)

@richardbutcher9708 8 месяцев назад

lock out tag out for safety. a wire or lock-out clip through holes keeps someone from plugging the electrical device into a hot outlet, preventing electrical shock when working on the device or for a faulty device.

@MildMisanthropeMaybeMassive 2 года назад

When I was little my Dad would put those tiny luggage padlocks through the holes of those cables for my PC and game console to prevent me playing games too late into the night. I learned to just swap the cables.

@derrickfoster644 2 года назад

I learned how to pick (actually bypass) the locks my parents used.

@Havron 2 года назад

@@derrickfoster644 LPL: Origins

@derrickfoster644 2 года назад

@@Havron only if I kept up with it I could have worked on a pick with LPL or maybe Bosnian Bill.

@user2C47 2 года назад

The locks my parents used were so comically bad that they could easily be opened with a binder clip handle. Or by simply pulling on it.

@derrickfoster644 2 года назад

@@user2C47 I believe I used a cross stitch needle put in till it stopped wiggle back and forth and it would open. Most likely they were master locks

@ebonyblack4563 2 года назад

"So was that whole sequence." Delivery so dry it belongs in a desert, and made me smile.

@brandonobaza8610 2 года назад

You mean, that..."hole" sequence. _(groan)_

@Joe-em8gc 2 года назад

California called; it wants its only notable attribute back.

@bene6270 2 года назад

I actually have an extension cord with a tiny lever which, when turned, pushes a pin through the holes, so whatever is plugged into the cord can't come unplugged. Very handy for electric lawnmowers!

@billreppa1928 7 месяцев назад

All metal parts on a plug are made on a progressive die. Being tool and die maker for 37 years, looking at the blade on the plug, I can't help but think it is a pilot hole to aid in the accurate advance (progression) through the die. It could also be used as a construction hole to aid location for a secondary operation.

@angelorigitano3862 9 месяцев назад

Hi, I noticed that IKEA timer with two flat blades was keyed, i.e. one hole was large. The timer must reverse the polarity of the hot and neutral accordingly. Enjoyed your video. Thanks, Angelo.

@Hannah_Em 2 года назад

"... mayonnaise is an off-white jam" might be the most upsetting thing I've ever heard you say on this or any other channel, even in brief guest appearances like on that losing connection gameshow Tom Scott did that time.

@13megaprime 2 года назад

Absolutely. It would be a jelly if anything, because a jam would be mayonnaise with hard boiled egg bits in it

@jamesplotkin4674 2 года назад

There's always that one receptacle in hotel rooms which is fully worn out. Can you guess which? It's the one housekeeping uses for the vacuum.

@NigelGentry 2 года назад

From my experience, many sockets at airports and on planes also have this problem.

@derrfes 2 года назад

That must suck

@TS_Mind_Swept 2 года назад

Well you gotta use something, and naturally you want to find the outlet that's the most centralized in the room so you don't have to move the plug a bunch of times (esp cause they don't exactly give you all day to clean each room)

@wolfsbaneandnightshade2166 2 года назад

As a hotel housekeeper... i almost never use the same plug in every room as a default. All depends on where i have to start the process of cleaning... which often depends on where the mess in a room is.

@TS_Mind_Swept 2 года назад

@@wolfsbaneandnightshade2166 how long the cord is and how big the room is would vary that as well; kinda inconvenient to use outlets that you can’t reach the whole room with

@ronnydowdy7432 7 месяцев назад

❤ Those holes are for a lockout. You get a lock that fits the holes diameter and place it through the holes and lock the lock. No one will be able to plug it into power.

@canadiannuclearman 8 месяцев назад

The holes are used to lock out the plug. A small pad lock that used for suit cases can prevent insertion into the wall socket by putting the shackle of the lock through the hole .

@FirstNameLastName-okayyoutube 2 года назад

I've seen the holes have a zip tie through them as a safety feature. Basically stopping a child from secretly opening a box item and then just plugging it in.

@robertjenkins6132 2 года назад

A few hours ago I bought a blender that had a such a tie going through the plug holes; I removed it with scissors. Weirdly, I watched this entire video without thinking about it, but I remembered it when I read your comment.

@OkieOtaku 2 года назад

I've seen, and have done so myself, taking tiny lockout locks and locking out the plug itself. OSHA seems to accept it, sooooo 🤷‍♂️

@Bob3D2000 2 года назад

@@robertjenkins6132 I hate it when people destroy perfectly reusable zip ties. Such a waste of plastic.

@Commodore1702 Год назад

I've actually used a Lockout/Tagout kit that had locks that fit over the plug and lock on using the holes, preventing one from plugging it in. Good way to make sure the new guy doesn't try to use a broken grinder.

@jayniks74 7 месяцев назад

Correct. Lock out tag out

@RavenThePlayer 5 месяцев назад

Certainly the intended use of these holes

@jamesdale1707 5 месяцев назад

Having worked with a hc yes that is what the holes aka connection point interuptors are for

@Labdominals 4 месяца назад

Definitely gotta LockOut/TagOut that hair straightener

@mockier 4 месяца назад

That's a good use for that

@JUSTENization 7 месяцев назад

They are for holding (locking) the flat tabs when molding the plug with wires during production.

@kodato92 7 месяцев назад

Here in Brazil we uses 240v and 127v in our houses, 240v are commonly used to heat water on showers, yeah we use electrical showers, some places only have 240v and others only 127v, i think its gonna be a nice video to talk about brazilian showers and our electric infrastructure

@dregoth0 2 года назад

One side benefit of the manufacturing use of the holes, is that it saves huge quantities of metal. When hundreds of billions of plugs have that hole, that metal adds up to $.

@DanielBrownsan 2 года назад

Err... that's only true if the prongs are rolled that way initially. The bulk of them seem to be "punched" and it's unlikely that the place doing the punching is also doing the refining of the metal in the first place, allowing them to collect the blanks and throw them back in the melting pot. I suspect THE OPPOSITE is true. That through some weird tradition of them always having holes, they now add them increasing the cost of manufacturing (if only slightly) and winding up with a lot of wasted brass.

@compzac 2 года назад

@@DanielBrownsan side note, most plugs in America arent made from brass, they use cheaper metals like aluminum or steel, mostly when i see brass plugs its on older items, some high current stuff or quite a few extension cords otherwise they use cheap metals or the weird case of using aluminum coated copper or brass which kinda defeats the point since using brass or copper provides a lower resistance, but plating the metal with aluminum actually brings the resistance right back up again.

@GoldenAura32 2 года назад

I think its more of a cost saving measure because you can use a jig to make thousands of plugs reliably and not have to check the actual quality of each plug. Save money with less workers and save money on materials and reduced waste.

@TheRamblingShepherd 2 года назад

@@DanielBrownsan the tooling to make the holes would probably cost more than any benefit from recouping material cost.

@ElectroDFW 2 года назад

@@TheRamblingShepherd you're ignoring the 'economics of scale'. If you're only making a few hundred, yes, you couldn't pay off the tool. But when you're punching millions, the savings can add up. And when you amortize the cost of the tool over several years... Honestly, if a tool is bought to do this, somewhere in the company it is saving them money.

@AaronSmart.online 2 года назад

As someone who has been to the US as a tourist: Imagine trying to use a well-worn hotel room socket with the weight of a travel adaptor (hard mode: BS 1363 travel adaptor) combined with a typical USB charger. I didn't experience them falling out but the angle was often precarious leading to poor connection or exposing the live pins for extra excitement. And this was with the wall sockets.

@lorenzoboyd6889 2 года назад

When traveling, a small roll of tape with aggressive adhesive has many uses. Duct tape, gaffer's tape, aluminum foil tape.

@JonatasAdoM 2 года назад

@@lorenzoboyd6889 Why my, just bend the pins a little like I do. It will plug as hard as a circuit breaker switch.

@YlowX7 2 года назад

that's so smart. just don't bend it too hard or it'll probably lose it's structure

@AaronSmart.online 2 года назад

@@lorenzoboyd6889 if I have this problem again I'd probably just get a small trailing extension lead, would take the weight off the socket then

@krecik26 2 года назад

Had similar experience in Japan. Often required some creativity to make it work

@HarlandSports 9 месяцев назад

Locking extension cords. I have 2 of them that I lock with a button end to end for my grass whipper. They don't disconnect when locked. Also, locks in drill cord. Very useful.

@DjEep71 2 месяца назад

Can't believe you're the first comment here referencing this. It's common in construction to have locking extension cords, so the don't come apart while dragging your saw or drill around.

@tomarmstrong1281 9 месяцев назад

Coming to America from Britain where everything is overengineered I was amazed at the flimsy domestic plugs and outlets.

@ChuckMastersonHQ Год назад

As a child, I once wondered what would happen if I laid a small nail across a partially inserted plug. For the next 10 years I lived with a spot of molten metal splashed onto the hardwood floor to remind me of the answer. Oddly it was a red dot. My parents never grilled me for an explanation.

@bpeterson3270 Год назад

I stuck a key in a outlet once bc i thought I was a electrician and couldn’t get hurt bc I was a electrician

@jasonwiley798 Год назад

@@bpeterson3270 well , you must have survived to tell the tale

@bpeterson3270 Год назад

@@jasonwiley798 idk how but I just remember sticking a key in the outlet and a loud noise

@slipperyblank_ Год назад

@@bpeterson3270 but are you an electrician tho

@dylan-5287 Год назад

I stuck a pair of tweezers into an outlet as a kid. I just remember the bright flash of light lol.

@Echristoffe 7 месяцев назад

In Japan we have some outlet where you can rotate the plug 45° to lock it. Could be interesting to see how the lock system work. Maybe they use those holes …

@thehuckleberry8349 3 дня назад

Wait that right side pin is LIVE? I can't even imagine how many times I've almost touched that damn thing trying to pull a tight plug at a weird angle

@zirconia21 2 года назад

Technology Connections: "Im just speculating, leave your comment below." Big Prong: "Oh no they're on to us!"

@dirkdoogenstein 2 года назад

As a Yuropean, I find these videos absolutely fascinating. Such holesome content.

@ZaHandle 2 года назад

*Yuropean*

@dirkdoogenstein 2 года назад

@@ZaHandle Ürøpæan, yes

@ktxed 2 года назад

Yurope is Yuuuuge

@vidareggum6118 2 года назад

@@ktxed my rope is bigger!

@ktxed 2 года назад

@@vidareggum6118 how many football stadiums to the rope ?

@Practicalinvestments 8 месяцев назад

It’s for lock out tag out, so you can attach a lock and prevent someone from plugging it in but also pretty sure it’s just part of the manufacturing process lol