For everyone asking about the co-witness with the Hellcat. I carry it with the C&H Precision plate and it just barely co-witnesses with the top of the sights. If you want a slightly better co-witness you can shave the pegs and go without a plate but that will void your guns warranty. I also had a very bad time with C&H customer service so your mileage may vary if you go that route.
I've been using a couple of EPS Carry MRS Green optics for over 6 months, and they've been awesome! I love the Auto Brightness feature because it still gives you control over the "Minimum Brightness" level (Green version only). All told I've got over 5000 rounds through 1 and over 2000 on the other.
I measured at the base of the optic and didn't include the battery tray (I may have not made that clear in the video). Including the battery tray you're absolutely right; Holosun lists width at 1.05". Thanks for watching!
407K is 200 bucks can’t beat it don’t fall for the rumors about emitters getting blocked. I carry mine 12 hours a day concealed pretty much never clean and have had no problems.
You need eps closed transmitter . Your 407 will get lint dust dirt humidity not recommended for carry but just the range quit being cheap and spend a few more beans
It’s too bad that they made it .050” wider than 507k. ( hangs off edges too much for my OCD eyes). Also it’s missing some style.. It has that mailbox look which reminds me of the older optics. I have a lot of optics including this one and its performance is good but its value is lacking imo. The 507k is my favorite for these smaller guns. Sorry if you are watching this video to convince yourself to buy a eps carry
Price is good seeing that the 407k is $295 (EPS $329) for the 2 MOA which is absolute best. That 6 MOA looks like a markers red dot on a white board. I own 3 of these sites already and 2 MOA is worth the extra cash.
Same exact experience recently, once I adjusted it to the right enough (a shit tone of clicks later) the outer 32 moa circle appeared very slightly warped and canted, probably wouldn't have affected the usefulness of it but my ocd caused me to return it and try to purchase it again at a later date hoping that I luck out with a good one
i bought one, gun started jamming, ejector is not ejecting brass ammo shell at the range. Took it for inspection and they said that the screw was too long and was in the way of the extractor. Screw needs to be shaved but it’s the screw that came with it.. what do i do?
I'm getting a Hellcat here in a couple weeks and getting a Red Dot optic for the first time ever and I'm looking at the holosuns, and I've come close to make up my mind to get to 507 k, but in order to get any Co Witness with the iron sights it seems I have to get a thinner adapter plate like the C&H, but I was wondering if you get co-witness with the iron sights having this eps and the plate that comes with it on the hellcat?
I just ordered this in 2 MOA green ater i sent back the 507k. had some serious starburst effect going on. also none of the screws it came with fit for a Kimber Mako R7
Default setting is 10 mins, but it can be adjusted all the way up to 12 hours. I'd double check your setting first, and if it really doesn't ever shut off I'd contact Holosun about it. Thanks for watching!
Can I mount this with a footprint on my standard Glock 19 by taking away the rear sight? Is there a link u can assist me for the footprint for G19 rear sight mounting. Thanks 🙏
Even with the plate I get a very very low cotwitness (basically just the very tops of the sights visible in the window) with the factory Hellcat sights. I prefer an absolute cowitness, but it's good enough for now. Thanks for watching!
This the exact reason I am in the comments! I have that slide on my shield plus but no optics cut. Talked to a few people and they want to more the read sight to the front 🤔 it’s already a short pistol I don’t want to bring the sights any closer together.
Between the Hellcat and the Shield PC? Personally the Shield fits my hand better, and the texturing is more aggressive (which I like). The PC trigger is notably better than the Hellcat trigger, too. Thanks for watching!
On the CZ P-10 slide, the EPS Carry matches the factory optic cut in width/profile, while the EPS full size has some overhang. Don't know about Sigs first hand, but I'd wager the EPS full size might have some overhang on the P320. Definitely on the P365. EPS Carry may have overhang on P365, it's been a while since I had one in hand at a store. EPS Carry may be closer in width to the P320 slide's cut.
Not sure why Holosun uses their own footprint, especially since it's so close to the RMSc footprint. At least the plate is included though. Thanks for watching!
I'm so frustrated! I would have bought this if it were available when I bought my 507k in March. I carry several hours a day and I am constantly cleaning the lens and worried about lint or dust covering the emitter.
I have even worse news for you lol...theres an MRS version of the EPS Carry has that same multiple reticle system the 507k does, so it's essentially the fully enclosed version of the 507k. The good news is I've been carrying the 407k daily for a few years now (usually about 8-12 hours a day) and can confirm that dust, lint, sweat, etc can almost fully coat the inside of the lens/ all over the emitter itself and the optic will still function enough to get a good sight picture/dot on your target, especially if you shoot with both eyes open....your brain will superimpose that dot on your target even if it's obscured. That being said the EPS is going to be taking over as my dedicated carry optic because it's nice to not have to gid at the inside of the lens/emitter area to clean it 😂 Thanks for watching!
I am frustrated as well but only because i purchased the Holosun 407c sold as a compact micro dot. That did not fit on my kimber Mako R7 so i bought the 507k multi reticle. The dot looked like a diamond not uniform at all. Now i have purchased the EPS carry and i have sent the 407c and 507k back to amazon under the return policy. The EPS carry is not much more than the 507k and that enclosed emitter gives some piece of mind.
For the Hellcat install I used the plate that Holosun includes in the box with the EPS Carry. I had to open up the rear lug holes a bit to get it to sit flat, but it mounts up solid. I don't have a shot of the plate by itself, but you can see it in the unboxing video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8L_PJpv2388.html Thanks for watching!
@realpracticaltactical when you filed the rear holes, did you do the entire diameter of the holes or just enough of each contact point to fit the 1/4 circle pegs into the holes?
