HOMEMADE 588cc 3 CYLINDER GX FINALLY GETS ITS TURBO!!//Part 2 

Thanks man this year I'm getting on it!!

How hp?

@tomplumb1 be a bit easy on him. this kind work takes quite a bit of brainstorming, patience there’s a whole list I could name. Just in the engineering aspect that’s including his time editing the video which can take a lot of time! Be patient my friend if the creator were to rush he could run into all sorts of issues and end the whole project because of one very tiny mistake!

​@@timurmurzabekov3821 20hp

Wow, thanks!

Thanks man not sure how it will hold up might switch to a blow thru but we'll see how it goes first

​@@councilhousecreations8035Blow through would require the carburettor to be pressurised, additionally the fuel pressure would need to be increased above atmospheric, in direct proportion to the boost. Not overly complicated with the use of a fuel pressure regulator with a boost nipple added to the atmospheric side of the diaphragm to fool it into thinking that's what the atmospheric pressure is. The carburettor needs to be sealed, which is the tricky part, with overflow and other venting, such as through the slide. My project was turbo charging an old Austin Mini. First I attempted fuel injection using a Volkswagen CIS, minus one injector, it would either idle with poor high end, or have high end without idle. Frustrated, I eventually found a Daihatsu Chrade turbo carburettor which was a blow through system, this solved all problems. Good luck, I hope this tidbit of information may help avoid some potential pitfalls.

yep draw through is the way to go for carb turbo

Thanks man I won't lie it's basically a noise machine lol 😆

@@councilhousecreations8035 well you are a machinist 🤷🏽‍♂️ you'd probably be able to make an adapter plate to mate a motor bike gearbox upto it, could make a cart 😁 weither its off road or on the street! Makin a gearbox adapter is a little hard but considering you've slapped 3 motors together and put a little turbo on it, I'd say you can do anything 👌🏾🤙🏾

T

Exactly!!

I wouldn't agree with you on it being a GSXR600, I'd rather say it's a Triumph Daytona 600, with it being a 3 cylinder

КПД трёх моторов будет меньше

​@@GrichaBarbarin Нет, КПД наоборот лучше, так как гораздо легче крутить три маленьких поршня, работающие по очереди, чем один огромный, вращающийся "впустую" большую часть своей работы. Но тут дело не в этом. Дело в том, что крайний двигатель, через который проходит мощность всех трёх моторов, просто не выдержит. То есть от этой компоновки толку нет...

@@nestandartnoye_hobbi имел в виду по сравнению с одним трехцилиндровым двигателем.

Hey man thanks a bunch!

Thanks man if it looks gd it is gd!

@@councilhousecreations8035 exactly

Thanks man I hope it performs

My pleasure!

Thank you very much!

I hope so!

Thanks man

Hey, thanks!

Always used stick got a mig now just use it for quick easy jobs but if it needs some strength bust out the stick and if its gotta look pretty i take it to work and tig

I use a Lincoln 3 phase mig at work all day but I've only got a little single phase mig at home so it just feels better doin most things here with the stick. Its amazing how many comments I get because of the stick welder

Hey, thanks!

Thanks man stick all the way 💪

Thanks man feels gd to get a video out hopefully this this will be gd

Thanks man u might be right. Might switch to a blow thru setup in the future

Blow through is the way to go. ​@@councilhousecreations8035

hey man, yeah hopefully this year will go a lot better, hope your well.

@@councilhousecreations8035 I struggle to get all my projects done before starting another that's the biggest issue! Sometimes life is too hectic to make time for filming & family comes first. I hope this year's going to be easier for you.🤞 looks like your channel has exploded over the past few years so there's definitely potential with some regular uploads ( just difficult to achieve when doing these types of projects/experiments). Amazing work on the exhaust/ turbo system pipework it looks brilliant & all done with your trusty stick ✅ Its going to be Very interesting when you get this beast bolted into a machine, looking forward to the eventual test ride videos 😂

Man u sound just like me I must have started dozens of project in the last year but only a few worked out and I didn't even record them 😅 I even put a man lorry engine in my l200 just didn't have time to film it...

​@@Adventure_Van_Upgrades Same here! Tend to start more projects before finishing what's on the table!

Thank you very much!

It might explode but it'll sound good while it's doing it!!

would make a great vid though ... as long as nobody dies in the process lol @@councilhousecreations8035

Hey man Thanks a lot! 🙏

thanks man

Thanks 👍that wud be epic!!

Lol you watched this too

Thanks man me too!

Hey thanks yes it was a pain welding 1.5mm tube with 3.2mm rods 😅👍

thanks man im not glad i waited a year!

Thanks mate! I did burn a lot of holes in the stainless pipe but I have the power of editing to smooth it all out 😎👌

Thanks man, I'm gonna try and make more videos this year was thinking of making a buggy for it but I might just slap it in a go kart for now. Hope ur doin well man 👍

@@councilhousecreations8035 cool man I’m keen to see it going, doing well thanks hopefully get more videos out myself this year

Thanks bro!