A self-made secondary combustion device has been added, and various parts have been improved for ease of use and stability.
Last time I made a stainless steel firewood stove for the winter camping. The main firebox was made by bolt & nut assembly of 2 stainless steel containers and 1 stainless steel tray without welding. A fire window is attached to the front and side surfaces. I hope you enjoyed it.
Disclaimer: Using a stove in a confined space can be very dangerous. When using a stove, be sure to ventilate properly and be prepared for fire or other safety accidents. I am not responsible for any loss or injury caused by carelessness.
Thank you for watching.
Always be safe and have a fun camping.
※ Improvement of part
• 자작 2차연소 화목난로 펠릿난로 스텐밧드...
1. Secondary combustion device installation
2. Improving the door handle of the firebox
3. Improved front air inlet shutter finish
4. Fire chamber, heat seal air-tightness improvement
5. Easily initial ignition by installing bypass damper in heat sink
6. Expansion of exhaust port size of heat retardation plate in heat sink
7. Separation production with 2 pieces of wood support, leg length (height) about 50mm
8. Attach base plate (stainless steel tray) for stove leg restraint
9. Pellet burner inlet expansion and plate attachment for further combustion
10. Installation of stovepipe fixing bracket
11. Replace some carbon steel bolts and nuts with stainless steel
※ The material used to make the version for the final upgrade
• 자작 2차연소 화목난로 펠릿난로 스텐밧드...
1. Secondary combustion device: 10A stainless steel pipe parts (4 elbows, 5 straight pipes, 2 valves)
2. Foot reinforcement base plate: 1 stainless steel tray, size about 500x400x20mm
3. Stovepipe fixing bracket: 1 70mm stainless steel band, 3 stainless steel hose bands
4. Others: M8 stainless steel stud bolt, stainless steel nut, stainless eye nut, stainless steel flat washer (inner D. 16mm), stainless steel flat washer (large) (inner D. 8mm), M6 stainless steel hex bolt & nut, M4 Stainless Steel Bolts & Nuts
※ Material used to make optional heat sink
• Video
1. Upper heat sink: full size of stainless steel food container, 2 inches high / 530x325x65mm
2. Lower heat sink: full size of stainless steel food container, 4 inches high / 530x325x100mm
3. Heat retardation plate: Stainless steel full size lid 530x325mm
4. Others: M8 stainless steel stud bolt, stainless steel nut, stainless eye nut, stainless flat washer (large outer diameter with inner D. 8mm), M4 stainless bolt & nut etc.
※ Material used for pellet burner
• 자작 화목난로에 펠릿난로 연소기 추가 업...
1. Steamer (small) bottom outside diameter 135mm
2. Stainless steel tableware holder large diameter 75mm
3. Stainless steel funnel, outlet diameter 50mm
4. Stainless spice bowl (small) base diameter 75mm, height 20mm
5. M6 Stainless Steel Bolts, Stainless Steel Nuts
6. M4 Stainless Steel Bolts & Nuts
7. Fuel: Pellets 6mm in diameter
※ Materials used to make the stove
• 용접없이 자작 화목난로 스텐밧드 우드스토...
1. Upper firebox: Stainless steel food container 2/3 size, 6 inches high / 350x325x150mm
2. Lower firebox: Stainless steel food container 2/3 size, 2 inches high / 350x325x65mm
3. Fire box door: rectangular stainless steel plate 135x185x20mm
4. Front view window: 'MESETA' firewood stove mini heat resistant glass bracket set (110x60) South Korea Online Only
5. Side view window: 'CAMTORY' Fireplace Heat Resistant Glass Bracket Set A (160x84) South Korea Online Only
6. Stove Pipe: 'MESETA' Stove Pipe (9 straight & 1 top) South Korea Online Only
7. Others: M8 stainless steel bolts & stainless steel nuts, stainless steel hinges, stainless steel grates, M4 stainless steel bolts & nuts, etc.
※ Tools used
1. 'BOSCH' Electric Impulse Drills / GSB13RE
2. MAKITA cordless drill / DF030DWE (used when small force is needed, small drill blade, wrench bolt tightening)
3. 'BOSCH 4-inch Disc Grinder / GWS6-100
4. 'SAMDO PRECISION' Hole Saw 60mm (Drilling Hole)
5. 'SAMDO PRECISION' Hole Saw 30mm (Drilling Hole)
6. 8mm stainless drill bits, 4mm stainless drill bits
7. 3mm hexagon wrench screwdriver & 7.5mm hexagon nut screwdriver (for M4 wrench bolt & nut)
8. D.6~18mm Step Drill Bits
#pelletstove #camping #woodstove
10 янв 2020
