No video :(

Honda Africa Twin - Crash Bar install - Ep. 1 Installing the Mounts

Подписаться 10 тыс.

Просмотров 18 тыс.

50% 1

#HondaAfricaTwin
If you are interested in any of the parts or components I used in this video, leave a comment below or visit the Amazon Storefront: www.amazon.com/shop/greategret
Here are the tools I used in this video
★Super useful Vessel JIS impact screwdriver: amzn.to/3rTsug9
★I wouldn't want to do this job without these ratcheting wrenches: amzn.to/3jMn7N8
★Super useful socket set: amzn.to/3plntv9
★All the hex sockets you'll ever need: amzn.to/3rQ0zhh
★The only socket extensions you'll need: amzn.to/3dhM2Xx
★A handy torque wrench: amzn.to/2Npuuht
I do receive a small portion of your purchase and it helps out this channel a ton!
Looking for a specific part or gear item? Scroll down 👇
I do receive a very small financial portion of your Amazon purchase if you use that link and it helps out this channel a ton!
Torque values for the engine guard and upper crash bar (light bar)
★6 mm flange bolt 12nm 9ft-lbs
★8 mm SH flange bolt 22nm 16ft-lbs
★8 mm flange cap nut 27nm 20ft-lbs
★8 mm flange nut 32nm 24ft-lbs
The porcess is the same for all Africa Twin Models. The light bar/crash guard are the same for manual and DCT, but they are different for the standard and Adventure Sports models. The engine guard is the same for all models. Each one has a product code:
Engiine guard for both Standard and ATAS, DCT and maual: 08P71-MKS-E00
ATAS Light bar/Upper crashbar, DCT and manual: 08P70-MKS-E20
Standard Light bar/Upper crashbar, DCT and Manual :08P70-MKS-E00
Engine guard attachment you'll need for both eengine guard and light bar/upper crash bar: 08P75-MKS-E00
Also, If you head to the Honda Powersports website, you can filter by bike and find the correct one you need. There you will also see the porduct codes.
★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
★Head over to the new website: www.greategretmoto.com
★Watching, liking, and commenting on these videos is the best way to support the channel, but every little amount helps. Support this channel for as little as $1 on Patreon: / greategret
★Haven't seen the earlier videos in the Route 66 on a Harley Iron 883? Watch the entire series here: • 28 Days - Route 66 on ...
★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
**2020 Honda Africa Twin Adventure Sports
*2017 Harley Iron 883 Olive Gold*
➡Sissybar: Burley Sissybar - amzn.to/2JNtJMt
➡Lindby Multibar for all XL models - amzn.to/2ylE4db
➡Exhaust: Vance and Hines Big Radius - amzn.to/2M5Ha6W
➡DK Customs tank lift and Coil relocation
➡Saddlemen Step up seat - amzn.to/2tfvCr5
➡Kuryakyn Momentum Vegabond bag: amzn.to/2yo74RA
➡Arlen Ness Black Fusion Grips: amzn.to/2M2d70c
➡Biltwell Chumps: amzn.to/2MEMiAj
➡Tachmount motorcycle phone mount: amzn.to/2EAt38o
*Other Gear*
➡Boots: TCX X-Blend - amzn.to/2JPL07P
➡Helmet: Shoei Qwest - amzn.to/2I2Km0O
➡Jacket:
- AGVSport
- Scorpion Covert Motoflannel
- Milwaukee Leathers: amzn.to/2JoGtFf
➡Pants: Scorpion Covert pro riding jeans - amzn.to/2MB8ATo or Rokker Red Selvage
➡Cortech Super 2.0 18 Liter Tankbag: amzn.to/2t8Lo6Z
If you are interested in any of the parts or components I used in this video, leave a comment below or visit the Amazon Storefront: www.amazon.com/shop/greategret
I do receive a small portion of your purchase and it helps out this channel a ton!
Heres where I get all the music for these videos: www.epidemicso...
The Camera Gear I Use
Super inexpensive and useful Camera: amzn.to/37cD2jE
Voicever and Camera Mic: amzn.to/3lR8dVI
Parts for the Super Fast Editing PC I Built
Super Useful Motherboard: amzn.to/353aFBx
POWERFUL Graphics Card: amzn.to/3k2yYWJ
FAST CPU: amzn.to/3nTUhfp
Useful and Inexpensive power supply: amzn.to/3lVySjV
16GB x 4 (64GB) DDR4 with airflow: amzn.to/31fnDei
1T M.2 Drive: amzn.to/2GYldKq
Ride safe, seek adventure, and keep your wheels rolling in the right direction!

Опубликовано:

13 фев 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 52

@rosarioroberto5823 2 года назад

Greetings Great video 🇺🇸🍾🎉🇺🇸 Would you provide the crash bars link to order? Thanks, keep producing more videos.

@GreatEgret 2 года назад

Here's the engine guard: shop.powersports.honda.com/p/engine-guard-1 Here's the mount required to attach the engine guard: shop.powersports.honda.com/p/engine-guard-attachment Here is the upper crash bar: shop.powersports.honda.com/p/light-bar-3

@jasonphd97 2 года назад

I just got my new AT and my crash bars just came in, your video is probably the best DIY I've seen on youtube. Thank you!

@GreatEgret 2 года назад

You’re welcome, Jason! It’s not a particularly easy job, so I’m glad the video helped out.

@GreatEgret 2 года назад

Also, congrats on the new bike! It’s one of the best bikes on the market!

@ms6801 3 года назад

Gorgeous bike. Congrats man. Look forward to the adventures! I’m exhausted from watching this. Lol. Have always admired your wrenching skills. Very detailed install.

@GreatEgret 3 года назад

Thanks, man! I just watched this video again and I’m doubly exhausted. 😅

@drklynoonrides6674 3 года назад

Man that is a pretty bike. Wow you went super in depth. Good idea. Most folks just gloss over an install and provide few details. Thank you sir!

@GreatEgret 3 года назад

Thanks, man! It was a challenging install for sure made more challenging with the camera in the way. 😅 I’m glad I could help out others that want to install these.

@BulldogBadger 3 года назад

And so it begins! 🤘😎

@junixsk8 3 года назад

She's looking better and safer!

@CRAZYLEGSONABIKE 3 года назад

It’s kinda ironic I have the iron then bought the Africa twin. Not sure if you have both like me but love the vlogs buddy. Not really rode the AT much but have dropped it and found the OEM crash bars were not very good so bought a more robust version. Stay safe buddy I’m based in 🇬🇧

@GreatEgret 3 года назад

Thanks man! I’ve heard good and bad about the OEM bars on the AT forum. I think most of the complaints are about scratches on the fairings or minor damage to the bars after a drop. Way better to have damaged bars than a damaged bike. It’s cool that we both made the jump to the AT. Great bike 👊

@eyesonly4451 Год назад

I've noticed that Honda refers to the upper bar as an _accessory bar_ not a _crash bar._ Lots of videos showing upper _crash bars_ bent into the broken plastics anyway. The "crash bar" may, on occasion, protect the plastics, but at the cost of transmitting the drop force into other parts of the frame not likely designed for such.

@TonysGarage 3 года назад

Man, install is pretty involved👊

@e45twp 11 месяцев назад

Hi there from 🇬🇧 great set of videos on these bars sp thank you. Jist one question, is there/do you have a torque setting for the exhaust flange nuts please?

@AT2021Rocker 2 года назад

I was told by a Honda parts guy that the Honda light bar is exactly that, a bar to mount lights, it’s not a true crash bar.

@GreatEgret 2 года назад

There are definitely more robust upper crash guards available in the after market and I bet a lot of riders have better experience with those. I dropped my Africa Twin while riding off-road a lot and the light bar did a good job of protecting my bike. Other riders I know have had a similar experience as me. I'm not saying your Honda parts guy is wrong and I think there are stronger, heavier, and more expensive options out there to protect the upper part of the bike. But if it was only a light bar, it wouldn't make sense to me for Honda to spend the extra money building just a light bar with protection around the upper fairings. They would just build a light bar.

@billmcmeekin7909 3 года назад

Great video, in awesome detail, and very well spoken. Nice! If you ever decide to put lights on these new bars please share. I have same setup but no lights yet. Just an FYI, Honda has given us Android auto now. Downloaded my update off Honda website and Into AT yesterday. Works wonderfully! Cheers Great Egret 🇨🇦

@GreatEgret 3 года назад

Thanks, Bill! I’ll put lights on the bar for sure. I just need to do a bit of research to determine which ones. I got my usb stick all set up. Now it just needs to get above freezing in my garage.

@noelpogiako1 3 года назад

Awesome Bro.👌 Well explained and detailed 👏

@GreatEgret 3 года назад

Thanks, man!

@user-ie5dm4sp1p Месяц назад

!!! WHY low engine bars is so required for upper bars installation!? (You said). Do you mistaked? Do you mean black mount guard attachment? Please please answer to me immediately!

@GreatEgret Месяц назад

The upper bars won’t fasten properly without the engine guard attached. Look at Honda’s powersports website. It specifically states on the upper bar page that the engine guard is required. Honestly, I don’t know why you’d want to install one and not the other.

@chrigdichein Год назад

ah the 2020 up comes without guards? Because all ATs 2016-19 so far came with crash bars, just stupidly weak ones. So all vids online are about upgrading to after markets. Yours is the first for installing Honda genuine ones. Are they and good compared to after market is the question now...

@GreatEgret Год назад

My personal experience is that they do what they need to do: Protect the engine and the fairings when you drop the bike. They aren’t as robust as aftermarket guards, but honestly, unless you’re dropping your bike in rock gardens, they don’t need to be as robust as most.

@Rhoso7 5 месяцев назад

Can you install the mounts and then reinstall the exhaust before installing the engine guard? What about the crash bars, can you install the crash bars after reinstalling the exhaust?

@GreatEgret 5 месяцев назад

This is video one in this series. Your question will be answered in the next two videos. But, leave the exhaust down until after everything is installed.

@Rhoso7 5 месяцев назад

@@GreatEgret Thank you so much for the reply. I quickly ran through the other two videos but must have missed where that step occurred. I ask because I'm having my guards powder coated. I'll be patient and lower the exhaust after I get my guards back then. Lucky me to have this quality video to reference, thank you so much for making this series.

@GreatEgret 5 месяцев назад

@Rhoso7 I’m glad it it helped out, man! Powder coating the guards is a great idea and makes your bike stand out from all the others.

@kupalisky3553 Год назад

what is a good alternative to holding the exhaust if i dont have a pickup truck jack or motorcycle jack or a buddy to hold it?

@GreatEgret Год назад

You can use bungee cords or even rope to hold it up. For extra piece of mind you could put something underneath after bungee cording. Tool box, bricks, or even books. I will say that an investment in a jack or two makes this much easier. Especially when you reinstall the exhaust and you can raise and lower it to exactly where you need it to put the bolts back in. Good luck!

@kupalisky3553 Год назад

@@GreatEgret Thanks, you’re right that it might be a good investment to investment to buy the jacks. I have an SUV, do those use the same jack as pickups (sorry not that experienced working on vehicles)

@GreatEgret Год назад

You’d be able to get by with a 1 ton jack. $40 at Harbor freight. They have the motorcycle “scissors” jack I use at Amazon for around $90.

@kupalisky3553 Год назад

@@GreatEgret Awesome! Thanks for the recommendations!

@danielbesco1722 6 месяцев назад

What are the torque specs to put the header back onto the engine. The capped nuts to press help the seal?

@GreatEgret 6 месяцев назад

Those four exhaust pipe joint nuts should be torqued to 20 Nm, which is around 15 ft/lb. Don’t tighten and torque one at a time, evenly tighten and torque the two nuts on each side so the pipe moves in and the washer gets crushed evenly. Hope this helps!

@danielbesco1722 6 месяцев назад

@@GreatEgret yes, greatly. I couldn't seem to find the values.

@GreatEgret 6 месяцев назад

@danielbesco1722 luckily I have the service manual. It’s been a few years since I’ve done this and I had to look them up myself. Glad I could help!

@danielbesco1722 6 месяцев назад

@@GreatEgret ya. I figured it would be easy to find online. I found lots of other specs. Just not those. Maybe I wasn't searching correctly.

@GreatEgret 6 месяцев назад

Nah, you were probably searching right. Just not one of those things that’s done all that often outside of a Honda service or shop.

@jasonshortphd 3 года назад

That is a lot of work. I am sure the dealer would have charger a pretty penny for that install. What is the total weight that they add to the bike? My Tiger already had them on when I bought it, and I always wonder about the weight.

@GreatEgret 3 года назад

It was a TON of work and this is just to install the mounts. I feel like this should be something Honda should include on all sold bikes rather than have them installed later. I don’t have an official weight on these, but just guessing it adds an additional 3lbs. Maybe less. I’ll just eat one less donut before heading out on a ride 😂

@jasonshortphd 3 года назад

@@GreatEgret Wow that is a LOT less than I expected. That is nothing. And yes, I agree they should come preinstalled. That is the big difference in Tiger lines - XC comes with them preinstalled (and wire wheels, and some other stuff). But the preinstalled guards was a big deal for me.

@buckaroo_AK Год назад

@@GreatEgret I did some weighing to add my 2 cents to your already priceless video.. the entire set of below items weigh 7.5 kgs / 16.53 pounds 1) engine guard L+R 2) light bar L+R+C 3) light bar center stay 4) guard attachment L+R 5) all new bolt and gasket supplies in pouches

@GreatEgret Год назад

That’s super helpful! Thank you!

@robertlumsden942 3 года назад

wow it is wild how much you have to remove and all lol. harley much easier huh. definitely you want it though.

@GreatEgret 3 года назад

It’s crazy how much needs to be removed. I feel like this is something Honda made stock. I’m glad I installed it. I’ll be dropping this bike a lot!

@jeffreylavergne3090 3 года назад

Hey do you still have the sporty ? Or you sold her?

@GreatEgret 3 года назад

I sold her and I regret it. Not because of the new AT, but because that Sporty was so fun to ride.

@jeffreylavergne3090 3 года назад

@@GreatEgret I was thinking of getting another bike aswell but I think I'll keep my sporty .. Sweet honda though !! Must be comfy to ride !!

@GreatEgret 3 года назад

@@jeffreylavergne3090 the best part about this bike is I can set it up for any riding environment or any type of riding. If I want a comfy plush ride. No problem. If I want to stiffen up the suspension for some fast and fun twisty riding, it can do that to!