Honda CB750 ★ Cafe Racer Frame Cutting and Welding Ep.4 & NEW PROJECT REVEAL

Подписаться 199 тыс.

Просмотров 41 тыс.

50% 1

Honda CB750 Café Racer Frame Cutting and Welding. Watch till the end to see what NEW PROJECTS I REVEAL!!!
#CafeRacerFrameCutting #CafeRacerBuild #CafeRacerGarage
In this video I'm working out where to cut the frame and how to fit the CB650 tank, I took my time with this so I didn't make any mistakes, This Honda CB750 Cafe Racer Is not the only motorcycle I'm building but it is my first.
Parts and tools I use:
www.amazon.com...
💥💥MUSIC FOR YOUR RU-vid CHANNEL
bit.ly/2OR9jRq💥💥
Watch the video till the end to see what NEW PROJECTS I REVEAL For this Channel
TOOLS I USE OR RECOMMEND:
Hitachi Cordless Drill 18V amzn.to/2FjsrTc
Triton SuperJaws (Foot Clamp) amzn.to/2FfyoV6
Hitachi 5-Inch Angle Grinder amzn.to/2HaDsXq
Welder-Lincoln Electric Easy MIG amzn.to/2oMAsd4
Welding Helmet (Auto) amzn.to/2D4YJix
Rivet Nut Kit Set amzn.to/2tj2JN7
Center Punch (Spring Loaded) amzn.to/2D2nhJe
Sheetmetal Folding machine www.redfoxmachi...
SEAT PAN BUILD KIT:
Fibreglass Resin amzn.to/2tmlA9P (Video
Fibreglass Mat amzn.to/2tpNr9o
Fiberglass Roller amzn.to/2HbJ97o
Contact Cement (Foam Glue) amzn.to/2GaSehq
Foil Duct tape amzn.to/2FZfj6z
Mould Release Wax amzn.to/2G3LEJK
CAMERAS I USE FROM Ep19 ONWARDS
Canon Camera Eos M6 amzn.to/2Ea5Abg (My New Camera)
Canon Camera Eos M3 amzn.to/2EauaIN (Cheaper Option)
=====================================================
For all commercial enquiries (Product Testing and Reviews): Please contact me at caferacergarage07@gmail.com
=====================================================
Want to help me create more content for you each week? You can now make a donation through Patreon! Even the smallest amount goes a long way and will be very much appreciated.
/ caferacergarage
=====================================================
★ DON'T FORGET TO WATCH
=====================================================
★ 01.
Honda CB750 Café Racer Carby Rebuild and First Engine Start
• Honda CB750 ★ Cafe Rac...
★ 02.
DIY Motorcycle Hydraulic Lift Table - From Old Shelving - Ep.1
• DIY Motorcycle Hydraul...
★ 03.
DIY Motorcycle Hydraulic Lift Table - From Old Shelving - Ep 2
• DIY Motorcycle Hydraul...
★ 04.
DIY Motorcycle Hydraulic Lift Table - From Old Shelving - Ep 3
• DIY Motorcycle Hydraul...
★ 05.
Honda 1993 CB750 CAFE RACER, Build - Ep.1
• Honda 1993 CB750 CAFE ...
★ 06.
Change Spark Plug Hack When You Don't Have The Right Socket
• Change Spark Plug Hack...
=====================================================
★ Goal - 1 Million SUBSCRIBERS
=====================================================
★ LIKE | COMMENT | SHARE | SUBSCRIBE
=====================================================
★ Please Subscribe Here: goo.gl/cjRKUC
=====================================================
★ CONNECT WITH ME ON SOCIAL MEDIA
=====================================================
★ Instagram: / cafe.racer.garage.07
=====================================================
★ Facebook
=====================================================
★ ABOUT MY CHANNEL
=====================================================
Hi Folks,
This is Dan, let me show you step by step on how I build stuff, including my CB750f2 Cafe Racer, SUBSCRIBE to follow my future builds, I'm based in Australia but I do travel a lot so check out my other channel with my amazing travel videos.
=====================================================

Опубликовано:

18 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 67

@CafeRacerGarage 5 лет назад

ALL Parts - www.amazon.com/shop/caferacergarage

@rexmericle5068 5 лет назад

Taking your time is the right mindset. If you rush, it will probably not fulfill your "vision". I spent at least a week looking at my CX650C frame to decide the best way to make the "tail dragger" vision I had in my head. Five years and tons of compliments later I'm still riding it and glad I took my time. I still freakin' love the look of that bike!

@johnDukemaster 6 лет назад

When I work on a frame, I put smaller size pieces of pipe inside the two pipes welded together. Drill a couple of holes for some weldpoints on each side of the cut. Might not be necessary, but.. :-)

@CafeRacerGarage 6 лет назад

Thanx john. It's a great way to ad strength to a join, I decided it wasn't necessary here because I am using 3mm wall thickness and I prepped the ends to allow for a strong weld. I do like your idea tho. 😁

@rexmericle5068 5 лет назад

John, that's old school and this 66 year old gearhead can vouches for you that it works!

@nuisynth9098 6 лет назад

Coming from a nighthawk 750 owner in the states I envy the rc42. Nice job on this bike!

@YTjndallas 4 года назад

I’m binge-watching. I’m gonna go outside and do a little work on my 1983 Kawasaki Kz750 LTD. It’s 72’F here in Grand Prairie, Tx. 75052 Your framework looks great so far on this video. It looks to me that you can just turn the handlebars upside down for a perfect position, and FREE!! I guess later I’ll see if you do that.

@skunkzilla5552 5 лет назад

Can’t get enough of your videos man. Just finished what you have up of the scrambler series now I’m starting on this one. Keep up the great work, can’t wait to see what you build next!

@square_bear7887 4 года назад

I really enjoy this channel and this series.

@seanhunt3417 6 лет назад

Unreal. That will be very interesting as I will like to do something similar to my cb. I will definitely be watching. Thanks.

@fladoodel 3 года назад

damn youre ballsy to cut the frame right after the tank, i kept wondering how people acheive that clean pipe look instead of the stock frame "c" channel steel, but this is the first video i seen someone actually do it.

@Mojokiss 2 года назад

You are awesome. I also do the things you are doing, just not anywhere near as well or involved. I do fiberglass stuff on my boats, motorcycle cleanups, and i do metal work when I have to, just no welding yet. If/when I get into that, I'll be able to do so many cool things.

@alwaysright168 6 лет назад

Doing an xjr1300, cutting the frame was a worry but most mistakes can be fixed! Very similar project to mine. Good stuff.

@CafeRacerGarage 6 лет назад

always right hey that's cool, thank you for the sharing, you should drop a link so we can check out your build :)

@garyyorke1619 5 лет назад

I do like the support you put underneath so it didnt alter as you cut the frame down to suit ..

@rgreville 6 лет назад

Awesome metal work, that line is what most people miss because of the difficulty cutting and welding frames. Good work bud

@CafeRacerGarage 6 лет назад

Thank you so much for this comment. It's really nice to see my videos being helpful 👍 I hope you enjoy them as much as I enjoy putting them together

@seanhunt3417 6 лет назад

Absolutely fantastic video mate.

@CafeRacerGarage 6 лет назад

Thank you so much Sean, I'm trying to improve more and more every week, Next weeks video will be me doing a front end swap to a set of R6 forks so dont forget to check that one out on Sun or Mon.

@TheYakkis 6 лет назад

Wow. So i started out on the seat foam shaping video. That was the first video i saw from your channel. Going back to these earlier videos is a perfect explaination of why i would stare at this bike for hours. It's the fact that you were willing to move a bracket 15mm instead of saying "fuggit, it's close enough". I just wish you lived in the US so i could hang out and get in your way.

@CafeRacerGarage 6 лет назад

TheYakkis I love it here but I wish I could live in the USA also. I’ve been there 3 times now and love it. It’s Just so hard to make it happen 😢 I spend a lot of time looking at the bike just thinking about the overall look I want. If I’m not happy I’m not afraid to show it on video and start over. It’s all part of custom built motorcycles 👍😁 I’m super grateful you are sharing your thoughts on my videos 😁 Thank you

@JTWorld210 4 года назад

Hellz yeah awesome 👏🏼 totally awesome man..

@Ikesane 6 лет назад

Your work is great. thanx for sharing this videos!

@CafeRacerGarage 6 лет назад

I will never get sick of comments like this :) Thank you for taking the time to write this comment, I always appreciate them, Its what keeps me going :)

@MrShmoses 6 лет назад

For one of the CX make it really modern cafe with some new tech to improve the bikes overall performance (Mono shock?). While the other one make it a scrambler for off-roading capabilities.

@CafeRacerGarage 6 лет назад

That is a great Idea :) I'm also on the lookout for a Virago 750 :)

@cc103itsme5 6 лет назад

Nice work, great vids!!

@iRidetas 6 лет назад

cx500 Bobber would be great! :D Cheers! Great videos subcribed!

@CafeRacerGarage 6 лет назад

iRidetas thank you, a mono shock or keeping the two shocks?

@iRidetas 6 лет назад

Mate a nice low slung bike cleaned up with a cool hidden mono shock would look ace!

@deanqrs1209 5 лет назад

I'm surprised it didn't need bracing before you cut but it stayed perfect and true

@lcrgarage3245 6 лет назад

Looking good. Why not convert one cx to a mono shock cafe racer. Doing a virago 1100 build at the moment. Can be stressful sometimes not wanting to make a bad cut.

@CafeRacerGarage 6 лет назад

Thank you for the comment Brice, I will need to look more into the mono Idea and work out the parts I will need. A Virago is on the build list for this channel :) I almost bought one the other day but it fell through the cracks, unfortunately. what year models are best to look for? How much do you have to do on yours?

@GetInThereLewis.nz1 6 лет назад

Awesome vid. Do a scrambler and a cafe I reckon. Cheers

@CafeRacerGarage 6 лет назад

Thank you Leon I didn't even think of a Scrambler 👌

@GetInThereLewis.nz1 6 лет назад

Cafe Racer Garage yeah I’ve seen a guzzi done up like one. I’ll try find a pic. Looks good with the engines this way I reckon.

@CafeRacerGarage 6 лет назад

It's a very unique idea, love to see a pick of what you are talking about.

@MrShmoses 6 лет назад

Good content Man! You need more subscribers!

@CafeRacerGarage 6 лет назад

Thanx Marius, I started this channel only a few months ago, I post 1 new video a week and I love It. it's been absolutely amazing! everything from amazing comments to suggestions, The RU-vid Bike building community is so supportive, Its the comments that keep me going, Ive got all new Video and audio gear so the videos will get better and better for you :) Thanks again for your amazing feedback Marius

@glynnguzman2195 5 лет назад

I’m curious about the original frame piece you reused near the tank. The angle at the right bend turns in about a half inch more than the left on that model. How did you deal with making sure it lined up with the rear of the bike when it came time to weld the rest of the seat frame.? Hope my question isn’t too vague. Thanks! Also Great vids👍🏼

@jeffp.5080 6 лет назад

I'm considering cutting out my top tube and replacing it, ive never done it and I'm curious if its possible without ruining my frame. Its the frame of a CX450. Does have motor mount to be moved also

@YoungFue 3 года назад

Could you please help me with a link to the piping you used here?

@leandropalou4260 5 лет назад

Great work!!! What is the exact model of the tank? Does it clear the width of the frame tube or you had to modify it? Thank you

@CafeRacerGarage 5 лет назад

Leandro Palou this is a 1979 cb650 tank and it’s requires a little chopping of the mounts both on the tank and relocating the mounts on the frame. Apart from that it fits 😊😊👍

@DifferentRides 6 лет назад

Doing great! liked the way you built your suframe. might do that on mine too :)

@CafeRacerGarage 6 лет назад

Nuno Cox thank you, let me know if you need any measurements 😁

@jrmarra85 6 лет назад

Enjoying the vids. I'd like to see a street fighter build 😁 just bought a cb750 project bike.

@CafeRacerGarage 6 лет назад

Thanx John, i will look into street fighter bikes :) what year is your CB750?

@jrmarra85 6 лет назад

2000 mate. Been searching for inspiration on RU-vid & Google,leaning towards a street fighter/cafe fighter. Glad I found your channel, keen to see more of your good work!

@CafeRacerGarage 6 лет назад

Wow, thank you mate, Its those kinds of comments that make me want to do more :) I found the same problem when i went looking for the same model bike i have so I decided to build a channel, :) Having said that, I had a few small audio problems in the next 2 episode so I went and got all new photography gear and you should notice a difference after Ep.9

@jrmarra85 6 лет назад

The audio wasn't an off put for me to be honest it was the work you carried out That I was I interested in (surgeon with the grinder) haha Good luck with your channel I'm sure it'll take off. I've subscribed so you got my vote!

@CafeRacerGarage 6 лет назад

Your comment about me being a Surgeon with a Grinder made me laugh. Thank you. New episodes will be out every Sunday or at the latest Monday :)

@jacobsmith299 6 лет назад

cx500 bobber!

@CafeRacerGarage 6 лет назад

Jacob Smith yeah I think that’s what I will do. Thanx Jacob

@jeffp.5080 5 лет назад

What thickness metal do you use for seat pans, electrical, and battery boxes?

@CafeRacerGarage 5 лет назад

Jeff P. Great question Jeff, I use 1.6mm mild steel, any more questions just ask :)

@jsmith6259 6 лет назад

can you increase the volume in your next videos? The level on my PC is at 100% but I can just hear you!

@CafeRacerGarage 6 лет назад

Ok sure thing J, thank you for the feedback :) Where in Australia are you?

@marcelohenriquebatistamend4617 6 лет назад

Put subtitles in Portuguese! hug the Brazilians

@johnacosta8529 3 года назад

Does cutting the frame devalue the bike?

@CafeRacerGarage 3 года назад

If you do it professionally it’ll add value to the bike depending on what bike you choose or the quality of the workmanship once it’s finished. I’m a bit of a perfectionist so my fabrication is better than OEM

@johnacosta8529 3 года назад

@@CafeRacerGarage Okay thank you

@johnacosta8529 3 года назад

@@CafeRacerGarage I’m copying your build of the teal/green with a 72 cb750 😅 love it

@karldevilla3376 6 лет назад

Its unusual but.. build a street fighter

@raymorris952 6 лет назад

Audio is a bit crap fella, like what your doing though.

@CafeRacerGarage 6 лет назад

Thank you for your feedback Ray, I will do my best to improve the audio on the next video, I upload a video every week so I try and improve my videoing skills each time. hand In there Ray its only going to get better. leave me a comment on the latest video If you think the audio is any better. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-x1tnEJhyDbk.html

@ianskinner1619 5 лет назад

holy shit, get your titles in order, i'm trying to watch the CBN build and you have multiple episodes names to do with different things. unwatchable. going to different channel