Honda City 4th Gen Fog Light Upgrade to Bi-LED Projector (Tri Color Fog Light) 

Hi, Sorry for being delayed to respond, here are the answer: 1. Yes the colors can be changed by turning off and then turning o again. the default color to start first time is cool white. 2. Yes, High and Low beam in the fog lamp, connected to the same fuse for change over as the head light using a fuse extender (does not require any wire alteration or cutting for Honda City) 3. I did it in a shop near Ramamurthy Nagar, Bangalore (VMT Tyre Mart backside). The guy who does his name is Tausif and does the job pretty neat. However I stand by to inspect the job is done to my satisfaction.

Answer to your questions are as follows: 1. Yes it can be installed in any model 2. Typically not. Depends on Installer

Stock Fog Lamp has almost zero enhancement to visibility over headlamps. So I had to upgrade

Thanks for your inputs

It's LED Projector, a similar HID setup is also available in market. I paid 7.5 K for the pair if my memory is helping me.

making the focus adjustment is a key and it cannot be done automatically. There is a nice website I found for reference: www.championautoparts.eu/news/how-to-check-headlights.html Also this projector requires some effort to adjust.

No modification in headlamp, it is factory fitted LED Unit

Please contact Johnson (+91 99947 00384) based out of Chennai, from who I purchased. I have no personal connection though.

Hi, Its almost a year and i see it is still holding good so far

I sold the city about 7 months ago, however Projectors were holding strong, I never regrated the decision of the upgrade

Please watch the video till end, dog lamp housing was installed after the alignment

@@DebsAutoLogy Thanks, can you tell me if you have connected the fog lamp to fog lamp switch or directly to the headlamp wires? Can you also show the connection?

@@baddriversofdelhincr2502 Fog lamps are connected to the Fog lamp switch (factory setup) only the high beam wire is connected to the High Beam fuse using an Extender.

From where did you buy it and what is the price please share the details

Hello sir Which type of connector socket in this upgraded Fogg light and it fits easily for low Bim, please suggest Thank you.

HB3 - High & H11- Low Beam. However mine is a all LED unit, no bulbs there

Also, it's been about 5 months since your installation I guess , would you still suggest them ?

So far so good, haven't faced any issues with the lights at all. Working as expected. The other problem is worth mentioning is I was driving another honda city few days back in night which was same make and model and having Stock lights. I given up the drive and asked the owner to drive as I wasn't able to see the roads in stock light at all. :)

I do not recall the videos If I have taken, let me check

Thank you Mr. Deb, if you could share a wiring diagram that would be very helpful too. Thanks

Yes, I was able to install it myself in most thing except getting a Fuse connection for High beam.

@@DebsAutoLogy please instruct how to calibrate