Honda CR-V: Replacing the Floor | Watch This Before You Start!

Подписаться 10 тыс.

Просмотров 4,2 тыс.

50% 1

Check out my shop for all toolslinktr.ee/AUTO...
Hey guys, this video will be 1 of 2 parts of this rear end collision repair
in this video, I'll be removing and replacing the rear floor of this Honda CR-V
/ autobodytech01
As an Amazon Associate, I earn a small commission from qualifying purchases. Some of the links are affiliate links and if you decide to buy the tools through them I earn a tiny commission. It costs you nothing but helps me big time.
7 Piece Dura Block Sanding Kit:amzn.to/48xvNj3
Steck Quarter Panel Puller 20022:amzn.to/48NjvCJ
Astro Pneumatic Tool 930 Mini Reciprocating Air Sawamzn.to/41SYQeq
Sunex SX8200 Surface Blaster Kit:amzn.to/48J7Swz
The MAXI - 220v:www.dentfix.co...
Evercoat Rage OPTEX Color Changing Filler:amzn.to/3OhiHhR
Evercoat 425 Metal Glaze Ultra 30oz:amzn.to/492KXg7
Canadian Tool and Supply 7-Inch Air Angle:amzn.to/3tJ2zOQ
Wurth 1/4" ANGLED 90 DEGREE DIE GRINDER:shop.wurth.ca/...
Mirka MR-6 Finishing Sander:amzn.to/3vrjje5
Body Line Tool:amzn.to/3tNoZP1
Martin 1024 9" Blade Surfacing Spoon:amzn.to/3SbJ8I5
Uni spotter 5500:www.toolsource...
3M Belt Sander:amzn.to/48qO4hI
Milwaukee M12 FUEL 3/8 Stubby Impact:amzn.to/3H9va2V
#autobodyrepair #automotive #car #welding #autobodytech

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 16

@AUTOBODYTECH Год назад

Check out part 2 where I finish the job! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-SJ7aa10aDx0.html

@AlfredoHernandez-fh5fk Год назад

How long it took for cutting an welding everything all back together those Hondas are a really paint in butt it’s just way over engineered

@AUTOBODYTECH Год назад

Hey! Agreed, this one is was quite a pain. I think this one took a solid 3 days of work. thanks!

@AlfredoHernandez-fh5fk Год назад

I’m doing one right now and it’s just so stupid the design it help a lot your video bro thanks keep up the good work ✊🏽👊🏾

@ferajtiberiussparrow8268 6 месяцев назад

How many hours did you get paid to do that whole job. I'm doing the exact same job now and this is a piss poor paying job

@AUTOBODYTECH 6 месяцев назад

Probably 30-40hours? Don't forget to get the mechanical time as well. Agreed for something like this.. it doesn't pay well. Have fun!!

@AlfredoHernandez-fh5fk Год назад

What type of drill bits you used to drill hss it would really help to know I appreciate ?

@AUTOBODYTECH Год назад

Hey! It's best to order those upper plates but in my case the parts wouldn't have been available for a few weeks so I decided to drill them. These are the drill bits I used. Hope this helps www.lawsonproducts.com/Supertanium/Solid-Drill-Bit-Carbide-516/P58047.lp

@kseries20-24only 3 месяца назад

These are awesome videos @AUTOBODYTECH quick question, for a DIY'r where could one go to get replacement floor panels, etc.. like you showed here? Can the average person go to Honda/Toyota and purchase these, or are they gonna say no because I'm not a business?

@AUTOBODYTECH 3 месяца назад

@@kseries20-24only you can order any part you'd like at your local dealer parts department. It shouldn't be a problem

@kseries20-24only 3 месяца назад

Awesome! I'll have to give it a shot some day, I've got an 02 RSX similar damage to this I doubt they make those panels for anymore, have to find a donor car to cut apart for my first attempt.. :/ You just gained a subscriber!

@AUTOBODYTECH 3 месяца назад

@kseries20-24only it's quite old, but you might get lucky, and they may have it available. Other than that, your other option could be asking a bodyshop if they can order you a salavged rear end from an 02 rsx. This way, you'll have everything you need for it plus extra

@kseries20-24only 3 месяца назад

Great ideas!

@literailly 9 месяцев назад

Where do you get the procedures for body panel replacement?

@AUTOBODYTECH 9 месяцев назад

It's called all data. You need to pay monthly

@literailly 9 месяцев назад

@@AUTOBODYTECH thanks! I have a Sienna that was whacked hard on the rear driver side. Unibody is kinked just behind where suspension attaches. Drives fine, but not clear yet if repair is worthwhile