Honda CRV : Rear Door Lock Actuators / Latches

Подписаться 900 тыс.

Просмотров 194 тыс.

50% 1

In this video I bring you along as I have a go with some Honda CRV door latches. The reason we are replacing them is because they are really loud when they lock and unlock. However they still work. At any rate the customer wants new ones so here we go. -Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
teespring.com/stores/the-sma-...
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store:
www.amazon.com/shop/southmain...
AES Wave Automotive Diagnostic Tools: www.aeswave.com/cart.php?m=af...
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.

Авто/Мото

Опубликовано:

20 авг 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 926

@sandybarnes887 2 года назад

Every tool has a hammer side. Except screwdrivers. That's a pry bar. 😆 classic Eric O. Love it

@DirtForester 2 года назад

Except they do.

@aussiebloke609 2 года назад

Only bent screwdrivers are pry bars. Straight ones are chisels. :-P

@The_Redkween 2 года назад

Any tool’s a hammer if you use it wrong enough.

@61rampy65 2 года назад

I have certainly used screwdriver handles as hammers before!

@dbcooper4375 2 года назад

Eric O - "every tool's a hammer" Also Eric O - "don't drop my torque wrench"

@mmmmitch3073 2 года назад

Hats off to Jason, the world’s most eligible bachelor. Without him doing the tires and brakes and other stuff, we wouldn’t get very many diagnostic (my fav) videos from Eric. I am a software engineer and I find the logic you use to fix cars endlessly fascinating. I am addicted.

@brandenmulhollen1155 2 года назад

To be truthful Eric’s diags along with tech. education helped me start my own garage. I learn more from RU-vid techs than school ever taught me. Messed up huh? Lol

@farmcentralohio 2 года назад

Great way of looking at it, and don't forget Josh doing his thing over in the other part of the shop so Eric has time for this :)

@johnwilliams4545 2 года назад

Better than any detective show I reckon.

@every-istand-ophobe6320 2 года назад

Engineers are a joke. They only know how to make the job 10 times harder and take 10 extra steps that are unnecessary. Experience and common sense will beat any engineer every time and every engineer is always "shocked" when they find out that the book they learned from was wrong .. this isn't a personal attack but I work around about 5 software engineers and about 15 engineers so let's just say I've had plenty experience with engineers.

@johnnyblue4799 2 года назад

@@every-istand-ophobe6320 And them with you.. pretty sure they love working with you...

@abadbronc 2 года назад

If anything were to break on my car and I found an Eric O video that covered it, I would feel like I won the lotto. Some lucky bastard is going to love this one. Thanks for doing what you do!

@Brandon_Meckley 2 года назад

About to do actuators on my daughter's 09. Excellent timing mr O!

@AlGoYoSu 2 года назад

That is how I discovered this channel. Did a search on here for a P0 code and one of his videos popped up. Been a subscriber ever since.

@konradhittner4668 2 года назад

. . . I would feel like I won the lotto-until Eric O. found my teenager’s weed stash in the back door pocket. Oh, well-better him than Trooper Friendly’s canine pal, Sniffty.

@LadyAnuB 2 года назад

Looks like two of us love this one for its repair guidance.

@Bobbywolf64 2 года назад

I had a grand caravan where the window wouldn't go down, and various other issues with the drivers door. Broken wiring between the body and the door. Down to the exact color wire that was broken in his video! Multiple times I have been working on a car, and something jogs my memory about a SMA video. Quick search, and bam, he has done it before me!

@ChrisNF 2 года назад

“Downtown Charlie Brown” hahahaha. Love it

@travisallen206 2 года назад

Down here in Indiana we call that left handed kool cigarettes or liberal cigarettes

@harrylister804 2 года назад

SMA gets the work and we get a video because the customer can't do anything but smoke that crap.

@dillonknight6136 2 года назад

@@harrylister804 those darn kids smoking that devils lettuce

@tp1837 2 года назад

When the screwdriver was too big and you said "If I had a nickel every time I've NEVER heard that..." Hilarious.

@DogRedful 2 года назад

My dream…AVE and Eric O fix a car together.

@rreveler6705 2 года назад

When putting a screw back into plastic or wood, I always turn it backwards until I feel it drop down into the pre-existing threads. I haven’t had a problem with the screw trying to cut new threads since I started doing that 30 years ago. Well, as long as I was putting the same (right) screw back in. Lol.

@Sam_Eassa 2 года назад

Eric is in the groove today!

@brandenmulhollen1155 2 года назад

I just posted above about that. You don’t have to use drugs to enjoy life people!! I’m the same way as Eric. It doesn’t hurt to be in a good mood and joke around. Life’s to short to be miserable my friends!

@xXBuckOFiveXx 2 года назад

The sma trifecta: Door fingernails✔️ Door grass✔️ Door mold✔️

@craigroth8710 2 года назад

Dont forget the bad of oregano!! Oh, wait, that would be a what... a quadfecta?!!!!

@smallchunkaground2071 2 года назад

Napa sticker on the old toolbox. Still not a sponsor way back when.

@markh.6687 2 года назад

Napa was NOT a sponsor before NOT being a sponsor was cool.

@00taohio85 2 года назад

Good day a new SMA and new pine hollow.

@a4000t 2 года назад

'Back when i liked cars before the general public ruined it' there was never a more true statement!

@jaimealvarez4722 2 года назад

Eric and Mrs. O had a groovy time that night...💨👍

@Garth2011 2 года назад

No years old tool box would be complete without an Isky Racing Cams sticker ! Back in the day, one of the best available.

@MikeBrown-ii3pt 2 года назад

Ed Iskendarian-The Camfather.

@PatrickLeeUS 2 года назад

@Chuck Kirchner Crane Cams in my day.

@markh.6687 2 года назад

Where's the "Thrush" and STP stickers??

@Garth2011 2 года назад

Comp Cams and Isky are the top brands from what I know of. Back in the day, many of the other brands wouldn't live long or destroy cam hardware.

@brucerude8248 2 года назад

How to make the job less stressful ,leave your weed for your mechanic .....good job Eric O and the lovely Mrs O .

@ghodgeco 2 года назад

A young mans first tool box is a rite of passage. Got mine wnen I was 12 and was expected to know how to use and care for the tools.

@Hugo_Overthere 2 года назад

Eric, When you're gone young mechanics will pray to your toolbox for strength and courage.

@williamgagnonroadboxservice 2 года назад

Great video Eric!!! I change door lock actuators often Never seen anyone take the time to show in as much detail as you just did.

@elvisalvarez4149 2 года назад

'Downtown Charlie Brown'. 🤣🤣🤣 Eric is too funny. You never know what will happen in his videos, which is why I like this channel

@stevie3275 2 года назад

watching Braves baseball pre game and get a sma notification - sma wins every single time

@socalventures1 2 года назад

This has got to be one of the best channels on RU-vid. A true real-world mechanic. (His superhero tagline would be "well there's your problem lady")

@thatdave86 2 года назад

You're a comic ,real entertainment ,was chuckling away at every quip you made 🤗🤗

@doncarrigan3916 2 года назад

It was Heart , Blues Traveler, then you whistled Hello my baby by Tin Pan Alley This is car repair with a touch of music trivia. NICE.

@AlexSwavely 2 года назад

And can't forget "No One Knows" by Queens of the Stone Age.

@southstreetbarbecue7875 2 года назад

That wasn't Tin Pan Alley. Everyone knows "Hello My Baby" was done by that bullfrog in the Merry Melodies cartoon. Sheesh!

@hatrickmusicnz 2 года назад

That's too big. If I had a nickle for every time I didn't hear that!! Nice one Eric :)

@micaht7768 2 года назад

Loved watching you put all the piddly crap back together without testing it. Been there, never turned out right, had to go tweak something.

@AlexSwavely 2 года назад

Missed the little white donger tho. gonna be a comeback..

@billscott2472 2 года назад

Hi Eric, Thank you for sharing your toolbox. I made a wooden toolbox in 4h. Still have it to this day

@tomtheplummer7322 2 года назад

The final moves the the door handle install...your are the magic man😉👍🏻

@jorgefernandez-mv8hu 2 года назад

Thanks for making this job look easy. Your running commentary is the icing on the cake. Thanks also to Jason your trusty sidekick in this madness.

@shawn_530 2 года назад

Nice!! A new SMA video to watch while hunkered down for the hurricane!

@lordjaashin 2 года назад

I'm Ridin with Henri

@jasonaltham7013 2 года назад

Its only a CAT 1. Here in Louisiana we had 6 of them last year

@johnmiech3544 2 года назад

Only a Tropcial Storm now here in New England.

@wammyz 2 года назад

Screwdrivers - also known as chisels, punches, scrapers, pry bars, retrieval tools (if magnetized) drills for soft materials, panel removers, paint stirrers, awls, and many more uses.

@jamesmac8424 2 года назад

As well as scribers, props, gouges, levers, and my favorite, throwing knives, especially into wallboard. A multi-tool, all in one!

@thomasszilagyi7445 2 года назад

One of the few tools that get names. At work, we had the heavy duty large one named "The Persuader".

@markh.6687 2 года назад

Caution on screwdriver package: "Misusing tool voids warranty. Not be used as any of the above except as a screwdriver. If you need the other tools, go back to your toolbox or go buy one, ya loser!" :)

@TheKajunkat 2 года назад

Yeah and if you were my dad, hitch pins for the tractor. At least that was he used my brand new set of Craftsman "professional" screw drivers for when I was a teenager, haha.

@phatbuddha1 2 года назад

occasional back scratcher

@richardcrouse9074 2 года назад

I love the rust protection of a Toyota and Honda, great cars. Just ordered my pull over hoodie!!!

@2491kridge 2 года назад

A good tip when replacing door latch thingmabobs: after your done always manually push the latch closed and make sure your door handle works before closing the door lol. Would suck to close the door to then find out something went wrong and it’s stuck closed.

@michucfc Год назад

I should have read ur comment first. Forgot to attach the rod to the the assembly. :/

@garysgarage3669 2 года назад

You talked about when you son was little. I had my 5 year old granddaughter out in the boat yesterday and was letting her steer. After a few minutes she started asking what everything was and what it did. When we got to the throttle, her eyes light up when I explained what it did. We were going along a few more minutes, when all of a sudden, the boat took off like a rocket, my wife fell off her seat and my granddaughter is all smiles and laughing. She loves going fast.

@dustypate2816 2 года назад

Great video Eric. The humor in this video is awesome, and you’ve came a long way on RU-vid. Congratulations man, you’re the best.

@mrenfilade7178 2 года назад

Lol that random bag of weed at 4:20

@billupstateny9151 2 года назад

There was no chemical confirmation, oregano❔❓

@dennishayes65 2 года назад

Eric O. said it was a nickel bag !

@billupstateny9151 2 года назад

@@dennishayes65 My hearing is declining, probably weighed the contents off camera👌🌿

@LadyAnuB 2 года назад

Eric, this is exactly the video I needed for doing the non-working interior door handle of the same side door on my Honda Fit. I've checked the handle and the cable head is on so it must be the lock side that's bad and now I need to remove the lock and replace the cable and you've given me the the way I have to take the lock out with the tricks to doing this.

@bigednycles 2 года назад

True and honest about the oem parts and the job to get her done,your the man bro salute to a true mechanic who deserve she best and much blessings to you and your family

@wakefieldyorkshire 2 года назад

Excellent training video, good lighting, good camera access/angle, good sound quality and detailed teaching commentary, combined with both wit and humour. Thank you. ******

@SouthMainAuto 2 года назад

Glad you enjoyed it!

@brandenmulhollen1155 2 года назад

Dang Eric! Was on a job and almost missed your new vidya! Watching it now my friend! Did a brake job on a 2017 Mitsubishi Lancer today. It was crazy how stuck those rotors were for a 2017! Got out the ole 6lb mini-sledge. I’m a mobile man without the luxury of big nasty. Lol. Only big nasty I got is a sledge and upstate NY muscle. Haha thanks for another Spielberg! 😆

@johnmiech3544 2 года назад

Eric was on point today! I usually get a chuckle or two (or three, or four......) from each of his videos, but he was on a roll today. Good stuff.

@raulflores1247 2 года назад

I do appreciate the extend you go to show us how it's done.

@fillg 2 года назад

I see from the old toolbox that you've been trying to get a NAPA sponsorship for years

@teacfan1080 2 года назад

NAPA didn't want to sponsor, so know Eric's trying to get NAPPER to sponsor.

@Craigd68 2 года назад

If you have a 6.0 and it's bullet proof that only means that you got rid of it lol.

@FixIt1975 2 года назад

How true

@johnbee7729 2 года назад

Or its for sale.

@kevinoscarson2941 2 года назад

Funny, shows the quality of the mechanics. We had fleets of them in f350-550. Once you know the issues and you repair them they are excellent engines.

@jamjames1971 2 года назад

Thank you Mr.O for all that you do for us viewers. And Mrs. O your awesome aswell hun. Thanks for everything you do for us

@elijahwade4898 Год назад

Great stuff! Helped me fix something that drove my parents nuts for two years in about an hour. Can’t thank you enough!

@johncarter1137 2 года назад

I built a toolbox almost exactly like that when I was 14 or 15 when I began helping my dad in construction during the summers. I had it for many years and gave it to my best friend when I moved from my first house. That brought back memories good and bad.

@larryskeeper1197 2 года назад

Yes, and the stickers from a bygone era..... Classic.

@davidd8435 2 года назад

Thanks for the content Mr. O have a good day.

@jonminer9891 2 года назад

Hey, Mr. O. That kind of repair doesn't use your detective work like most other repairs, but it has its own kind of challenge. Thanks for taking care of the camera so as to let us see what you are doing. It is a big help. Thanks for sharing! Stay Healthy!

@blockbertus 2 года назад

I always appreciate how you make sure that the screws and bolts are torqued to factory spec once you are done showing us how the job is done.

@markh.6687 2 года назад

Eric O.: "It's inch-pounds for these door fasteners, NOT foot-pounds, you wackjobs!"

@Mxbarry 2 года назад

Great video! I have the exact same model screwdriver but in a flat blade. I wish I had the whole set.

@AT-fq1eg 2 года назад

If you heat that sticky stuff (foam) with a hairdryer, it peels easily.

@w829l5 2 года назад

28:36 😂🤣🤣😂🤣😂🤣🤣😂 didnt have to say a word, the facial expression was gold

@Black3ternity 2 года назад

Had to work through the night. Waking up at 2PM my time now, having a cup of tasty coffee and watching a new SMA Video. That makes all the bad stuff from last night worth it.

@chiphaverstick3913 2 года назад

1500 thumbs up in the first hour....incredible, also a mechanic that knows what JIS screws are, even more incredible. Keep up the good work Eric. The best to you and yours!

@_stardust62 2 года назад

Dovetail joint construction on your tool box...nice!

@66mymouse 2 года назад

Side note. Love your content. Thanks for showing us how it’s done. Glad your your here.

@nxtlvl721 2 года назад

South main auto videos have saved me thousands of dollars my first one was timeing belt/ water pump on a Honda pilot

@basshunter428 2 года назад

Hey, nice dovetail work on that tool box! That's impressive craftsmanship! Funny thing is that it doesn't suprise me seeing how you go about cleaning up those rusty heaps people bring you before reassembling them! Attenton to detail and quality work are scarce attributes nowadays! 👍

@brucejones2354 2 года назад

It's a shame, but I find that the extra mile is often a lonely and desolate place. I find it refreshing to see people like Eric (and Richard) out there with me ! ! !

@joshuarobinson2990 2 года назад

I remember when I was a kid and mom would tell me I was not to touch something. I would make a mental note of how the item was placed and touch it anyway when mom was not looking. I would put it back exactly how I found it. I still do that to this day when I repair something, It is very hard to tell if I took something apart and repaired it.

@jamespfitz 2 года назад

You naughty boy; you good mechanic.

@richardbonfiglio1765 2 года назад

I've seen your work !

@Jaimeg5602 10 месяцев назад

Wow, my daughter has this same issue and this video included every detail needed to know I can make it happen. Commentary was a bonus.

@soleiko4749 2 года назад

As always Mr. O we appreciate, or at least I do, not wasting time in the video with looking up factory torque specs and tightening all screws and bolts down to stated specs. And much like you, any repairs I do, I always look up and torque down to specs when nobody is watching.

@daviddamico4288 2 года назад

Nice job Eric love the tool box too cool stuff

@coldjello8436 2 года назад

That’s an odd place to store oregano…

@k4x4map46 2 года назад

lol I was thinking the same thing but tend to read a bit of the comments to avoid double posting!!

@neiltheplayer 2 года назад

rofl

@61rampy65 2 года назад

It must have been catnip!

@phatbuddha1 2 года назад

Some people like extra oregano on their pizza. What, am I the only one?

@patrickweix8289 Год назад

My son's Honda CR-V (2007) had the same issue, and I was able to change the back door actuators and was able to fake my way through the front passenger one as well, all thanks to the detail in this video. Nice walkthrough and entertaining commentary.

@jonathanhageman150 2 года назад

So I just put in New wheel bearings and struts in my 07 dodge caliber from watching your shows. Thanks you for the education. 🙂

@notsoserious0944 2 года назад

Hahahahaha! Just set that to the side...now we know how they put up with that noise for so long.

@Teknyk303 2 года назад

This is perfect. I gotta do it on my CRV. Thanks Eric!!

@TheOriginalDaveJ 2 года назад

Remember and fasten the blue clip back in over the actuator rod😉

@SouthMainAuto 2 года назад

Any time!

@hammer-fn7gm 2 года назад

I must admit you are an excellent mechanic. I have not seen you throw a tool yet. I do it at least once on every project.

@hugorazo9448 Год назад

Hello Eric, thank for this video! I had previously tried removing those 3 screws that attach/hold the actuator to the door and gave up until I could get myself an impact driver. I came across your video today and heard you say that have to grunt as you push and turn on those screws and it worked like a charm. I am a new viewer and subscriber now. Thanks again!

@alansmith4734 2 года назад

The Music Trivia was awesome!

@JEckar2009 2 года назад

Will never break again since it’s now been crystallized.

@adamjones2025 2 года назад

Door Lock Actuators can be a mother lover to fix or replace. Glad the master is working on the customers car.

@dancahill9122 2 года назад

That's nice of you to call Eric a "master". Actually he is a good DIYer, NOT an ASE certified mechanic. He actually says this in one of his earlier videos.

@adamjones2025 2 года назад

@@dancahill9122 I call him a master, because almost shops and dealerships can't find a vehicles problem and sends it to Eric to fix.

@jabernathy2595 2 года назад

Hi Eric, I'm a subscriber and enjoy your channel very much. I'm often lost/confused about some of the electrical diagnostic tests you do but I'm learning. Thanks for sharing your expertise with us. Best of luck in the future. Btw, seems Mrs. O is getting more comfortable on camera :) Cool lady and great kids. Stay safe and look forward to your next video.

@Mike_Engel 2 года назад

Great Video today Eric... Love to watch you work with your endless words of wisdom... Keep it up... btw how is vinny??? he still around?

@anthonyvon4531 2 года назад

I did my 2013 Lexus a year ago. Hardest part was getting the door panel back on. 🤣 I struggled with that.

@craiggoodwin9704 2 года назад

Eric O. is "efficiency in motion", "smooth as silk", both taking apart and putting back together. Been putting off working on a Dodge door because the talent may not be there. What did he say, "if I can do it.......????.." Well maybe. Thanks for sharing!

@Hondatek254 2 года назад

Eric, Make sure you tighten the bolts to loosen them, then loosen them. They strip out easy. I worked for Honda, They had a bulletin with a warranty extension on all them door lock actuators. Great video.

@philhalpin4882 2 года назад

Another midnight vid,cheers Eric!!

@kensimpson8133 2 года назад

Love the original tool box tour! :)

@richardbonfiglio1765 2 года назад

My first project in Auto Shop was a valve job on my Buick Straight Eight. That toolbox is Way Cool.

@glenjones6980 2 года назад

Mr O ramps the whole entertainment value up a notch this time around.

@HansPD 2 года назад

Anyone else here that always points back to Eric O when he tells you, you can do it? 😋 Greetings from Norway - great channel! 😍

@45AMT 2 года назад

"Donger" Eric's word for what us southerners call a "Dodad" LOL!

@simonparkinson1053 2 года назад

@@Loveitdownunder I like Dave Jones' (EEVBlog) description of bad solder joints: "Dryer than a dead dingo's donger"

@smijas 2 года назад

5 min into the teardown, is thought I heard Ms.O calling in the background,... "You need a bigger tool Eric."

@badandylaoc 2 года назад

"You don't grunt, ya ain't gonna git it." Truer words were never spoken.

@jimmyaber5920 2 года назад

I saw the flatulence extraction hose in the background. So nice of you to keep a toot free workplace.

@fillg 2 года назад

I knew the weed baggie was going back in the door pocket, but I chuckled at the Shhh

@AntonioClaudioMichael 2 года назад

Nice to see the Og Tool Boss Eric O @SouthMainAutoRepairLLC

@mondragon9282 2 года назад

Had to change the driver door lock actuator on my wife's old Dodge Journey. The only reason I was able to figure it out is because I work in an auto factory, and I spent just enough time on the door line to have a general idea of how the whole thing is put together. Great video!!

@midwestfarm757 2 года назад

Thank you for the video. My 2008 Crv has 219,000 miles and I have to replace the rear door lock. The last set has lasted since I bought it with 96,000 miles, 9 years ago (Dealer replaced for free).

@Gunman1628 2 года назад

Did my 2011 CRV front passenger when they started going crazy by locking and unlocking by themselves. the parts are pretty cheap and its not a hard job. probably an hour or two. there was actually a recall on them

@simms196 2 года назад

Good kid gone Bad sticker on tool box 👍

@chrisanddorie 2 года назад

I am glad that I'm the only one at home while I'm watching this video. The Tommy Boy reference had me laughing FAR TOO LOUDLY!!! Thanks Eric!

@6pointnite 7 месяцев назад

Hey man, great video. My biggest issues were the removal and then replacing of the unit around the window track. Your advice to slide it in from the bottom was spot on, cause there really a'int room to turn and remove/install. I was beating my head on that one for a while, then I found this video. Also the metal rod detach with the retaining clip was tough. Anyway, I conquered the beast, and for a 2008 with 224K, saving the money was totally worth it! Thank you and stay busy!

@gregwhite5058 2 года назад

First time I've seen a circular saw with car repair tools. Must be for when things get REALLY serious.

@ampman3228 2 года назад

There is a great RU-vid video where Andrew Camarata uses his chainsaw working on his Dodge Ram interior.

@ernestrollins383 2 года назад

It’s from the days of old when cars were made from wood. 😂

@markh.6687 2 года назад

@@ernestrollins383 Yabba Dabba Do!! - Fred Flintstone modifying his wood-framed Rockmobile.

@jefflong3200 2 года назад

From A to Z and actuators in between SMA does it all.

@nonyabiz2777 2 года назад

Eric o uses his two lips a lot. Nice work. It’s alway a pleasure to hear your unique storytelling skills. Bravo sir.

@kurtblackwell6214 2 года назад

The Phillips vs JIS screwdriver bit really hit home for me. My RC airplanes have little screws everywhere... and they are "Phillips" BUT they are not a #1 Phillips or a #2 Phillips. They are like a #1.25-#1.5 Phillips. I always chalked it up to crappy chinese quality control; until I discovered a "#1 JIS" was the correct size! No more stripped little tiny screws! That is the ONLY time I've ever needed to differentiate between Phillips and JIS. LOL Thanks Eric O!

@JT_8283 2 года назад

I would no matter how carefully I would take a door panel off especially a GM vehicle those stupid clips would always break. P.s. stay safe these next couple of days

@poorboyman5565 2 года назад

I am sure that baggie was oregano for that night spaghetti sauce. :D

@JamesLee-tt9oe Месяц назад

Thank you sir this is going to be a lot easier on Monday when my part comes in to replace this myself instead of taking it to a dealership and pay them outrageous labor rates which I used to work at a dealership Chrysler Jeep and Dodge dealers for 20 years and thank you and have a wonderful weekend

@KevinJohnson-fx6wq 2 года назад

Nicely done Eric. I needed to wach since I still have a draw on my '07 Galant & found the rear driver door inside panelnwasn't put back as it should. I went through the whole shebng of letting everything rest & fund a draw on the door lock fuse which seemed to reset by activating the locks 2 times & no more draw on the fuse. I need to do it again only having the amp draw monitored over the negative terminal.. Such is ife. Thanks & wishing you guya bit of a better day.