Тёмный

Honda Rebel 450 CMX450 Bobber 

Hard Boiled Customs
Подписаться 1,7 тыс.
Просмотров 1,1 млн
50% 1

Check out and follow my Instagram and Tiktok pages below!
/ hardboiledcustoms
&
www.instagram....
Pulling out the Bobber for a quick spin around the block. This 1986 Honda Rebel 450 was built by my father and I and was inspired by WWII era bikes.
Modification list:
Frame/ Suspension:
- Stock Rear Frame/ Swing Arm Removed. Custom 3" Stretch, 2" Drop Hard Tail With Harley 3/4" Axle Plates.
- Frame Neck Raked To 38* Degrees (Stock Was 32*)
- Solo Seat DIY Weld On Spring Bungs
- Custom Left-to-Right Side Hand Shifter Linkage. Brass Shift Knob made by Brock Schneiderman. (Can be used or can be locked and just for show)
- Detabbed Frame. New Tabs Welded Onto Frame Where Needed.
- Frame Powder Coated Gloss Black (Some small areas have been touched up with spray paint after some welding Tab modifications)
Rims/Tires/ Axles:
- DNA 4" Under Springer. Chrome Front and Gloss Black Rear.
- Harley Softail 40 Spoke 16" x 3" Front Rim Powder Coated Black With New Bearings.
- Harley Softail 40 Spoke 16" x 3" Rear Rim Powder Coated Black With New Bearings.
- Rebel Gears Custom Rear Harley Sprocket for Harley Softail Rim. Geared 3 Teeth Lower Then Stock For Better Highway Cruising and Longer Gears.
- 1989 Harley FLHS Rear Axle.
- DNA Front Axle Kit.
- Firestone ANS 16"x 5.00" Military Tires
- New Chain
Brakes/Cables/Levers/Bars:
- DNA Chrome Harley Big Front Brake Kit
- DNA Chrome Harley Big Rear Brake Kit
- 1973 CB350 Rebuilt Front Brake Reservoir and Lever
- 1973 CB350 Clutch Lever
- Spiegler Performance Custom Front Brake Line
- Venhill Custom DIY Clutch Cable
- Harley Softail 1987-1999 Rear Brake Reservoir and Brake Line.
- Custom Fabricated Forwad Control to Rear Brake Linkage
- Custom Welded and Fabricated Top Triple Tree Handle Bars.
- Emgo Throttle with Jackhammer Grips
- Motion Pro Custom Throttle Cable
Electrical:
- Custom and Wiring Harness.
-6" Tinworks Oil Tank. Powder Coated Gloss Black. Wiring Harness Is Hidden Inside.
- Custom Bar Signal, Hi-Beam, On-Off-Start Buttons and Switches
Misc Parts:
- Cycle Standard Sporty Indented Gas Tank
- Brass Gas cap
- Brass Fuel Gauge sight
- TC Bros XS650 DIY Forward Controls
- LaRosa Rustic Brown Saddlebag
- Mother Road Customs Dark Brown Distressed Leather Seat
- Biltwell Chromoly Seat Post
- 3" chrome solo seat springs
- Custom "Hard Boiled Customs" Battery Box w/ New Battery
- Low Brow Customs 6" Ribbed Sting Ray Fender
- Mini Black Bullet Turn Signals
- No School Choppers Rear 1933 Tail light and Mount
- Powder Coated Tank and Fender Metallic Bonze. Fender is a little faded from cleaning agent.
Engine/Carbs/Exhaust:
- Carbs Rebuilt and Rejeted
- Custom Harley Choke Mount and Cable set up
- Cycle City 2.5" Polished Aluminum Velocity Stacks
- Tan Exhaust Wrap
- TC Bros XS650 DIY Exhaust Kit
- Emgo Cocktail Shaker Mufflers

Опубликовано:

 

6 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 140   
@gdmofo
@gdmofo 11 месяцев назад
Dude totally gnarly I would like my 86 450 Rebel done that way but without the hand shifter can't walk and chew bubblegum at the same time lol
@doomclap
@doomclap 5 лет назад
Neighbor has good taste in cars, and you have good taste in bikes
@SLAYER-nm5zw
@SLAYER-nm5zw 7 лет назад
Omfg,easy the best looking rebel on yt.Sick bike bro!!!
@charliegutierrez8728
@charliegutierrez8728 6 лет назад
The best rebel chopper in the internet. 👍 Lake Forest isn't to far from me.
@charliegutierrez8728
@charliegutierrez8728 5 лет назад
Hey bro you still building bikes
@charliegutierrez8728
@charliegutierrez8728 5 лет назад
@@Hardboiledcustoms Aw man that sucks. Your bikes are hella badass.
@gamwpanagia
@gamwpanagia 5 лет назад
A hand shifter?! Whaaaaaaaaaaaaat
@odomis07
@odomis07 5 лет назад
Awesome looking bike brotha. Make sure you pass that bike down to your kid and his kid etc..... Keep that bike in the family.
@jordanjoestar8839
@jordanjoestar8839 5 лет назад
This little 450 has more style than the entire HD lineup at the local Pirate Outfit Convention
@russellgreen2560
@russellgreen2560 6 лет назад
A absolute work of art.....well done
@chrisfloyd9224
@chrisfloyd9224 6 лет назад
Good looking bike. Great exhaust sound.
@RobertAllenroballen2
@RobertAllenroballen2 4 года назад
GREAT! Loos & sounds fantastic. Love them pipes.
@MrNickelbrille
@MrNickelbrille 5 лет назад
N I C E .What a shame that we can't do a bikes like yours over here in Germany.
@MrNickelbrille
@MrNickelbrille 5 лет назад
@@noidontthinksolol You love our autobahn -we love your tüv ;-)
@MrNickelbrille
@MrNickelbrille 5 лет назад
We get probleems even with thombstones illuminating upwards.The reflection of the licenseplate might blind the car/bike behind you.Everything has to have a E number on the parts
@ultramaximusreviews
@ultramaximusreviews Месяц назад
That is a tough looking little bike
@Hardboiledcustoms
@Hardboiledcustoms Месяц назад
thanks!
@bisket2003
@bisket2003 5 лет назад
SUCH a beautiful build
@tranquynhanh8991
@tranquynhanh8991 5 лет назад
Damn !!!!! 270 degree inline 2 !!!!!
@1badombre82
@1badombre82 6 лет назад
I don't know how you you could have done a better job. It even sounds perfect
@shelbydaugherty8352
@shelbydaugherty8352 5 лет назад
Shorter pipes
@oldpieceoflooseass
@oldpieceoflooseass 5 лет назад
I know how. Get a goddam Harley
@ewaldc2376
@ewaldc2376 5 лет назад
Larry Brasher JR your a douche bag dude
@e.e9331
@e.e9331 4 года назад
@@oldpieceoflooseass he would but harley bike is a slow piece of shit
@davidnegotec7029
@davidnegotec7029 Год назад
Si en las motos altas no te ven los trailers, ya me imagino en esta , que miedo, pero que belleza
@jamesa6272
@jamesa6272 Год назад
Sounds so much better without the internal baby exhaust diameter pipes!
@Hardboiledcustoms
@Hardboiledcustoms Год назад
Definitely
@jamesa6272
@jamesa6272 Год назад
Did you have the pipes made ?
@Hardboiledcustoms
@Hardboiledcustoms Год назад
@@jamesa6272 I bought a DIY exhaust kit and cut the pre-bent pipes how I wanted them and then welded them up.
@jamesa6272
@jamesa6272 Год назад
@@Hardboiledcustoms woah didn’t even know that’s possible. Did you have to tig them? It is possible to mig them?
@Hardboiledcustoms
@Hardboiledcustoms Год назад
@@jamesa6272 I used mig. Welds didn’t turn out the prettiest but works well
@EbolaSquirrel
@EbolaSquirrel 5 лет назад
awesome,but the tape over the exhaust doesnt make sense,theres no tape where your legs would be
@deborahchesser7375
@deborahchesser7375 5 лет назад
For a small motor they do really good
@DEATHDRONE5000
@DEATHDRONE5000 5 лет назад
A shift nob... now thats a flex
@DarkLinkAD
@DarkLinkAD 6 лет назад
Have you tried making one exhaust pipe longer, at least 16in to delay its exhaust pulse?? Like a Suby/Chopper effect.
@1nidoking1
@1nidoking1 5 лет назад
Great sound :)
@natedean5815
@natedean5815 5 лет назад
Got 250 rebel to learn how to ride. Then I find out they made a 450 the same year I was made... hmm I know my next bike.
@Jessethetoaster
@Jessethetoaster 5 лет назад
Very nice build 👍
@jonstel5941
@jonstel5941 5 лет назад
I would love how he made that hand shift and seat so I can do that to mine has a repo 45 flathead hand shift bolted on the stock shift arm and a modde repo 45 foot cluch on it (sorry for the bad spelling)
@maxsharpe2194
@maxsharpe2194 6 лет назад
Knucklehonda? Pretty sweet
@robertbutts9835
@robertbutts9835 4 года назад
Beautiful bike wish the seat was a touch longer or bigger
@UncleRobsGarage
@UncleRobsGarage 4 года назад
Wow! Perfection.
@darring4505
@darring4505 4 года назад
ahh Great vid short and to the point. had to watch it 2wice to take in the awesome. Best of all the only music I have to listen to comes from the PIPES
@rayperkins4506
@rayperkins4506 Год назад
Sounds great.
@Hardboiledcustoms
@Hardboiledcustoms Год назад
Thanks Ray!
@SeeGabeGo
@SeeGabeGo 5 лет назад
I'm really close to pulling the trigger on the 2018 rebel 500. I just don't like how the bike is so quiet, even with all the aftermarket exhausts out there. guess I gotta go with a custom exhaust if i want it to sound closer to this then huh?
@reptileguy8458
@reptileguy8458 5 лет назад
Love how it sounds!!!
@TheAgoProduction
@TheAgoProduction 5 лет назад
Cool for a rebel
@chrispuckett5389
@chrispuckett5389 6 лет назад
tiny man big dreams hell yea
@donjonson9587
@donjonson9587 5 лет назад
That is a sick looking rebel. Edit: holy snick that sound!
@aaronjacobs579
@aaronjacobs579 5 лет назад
That was awesome
@tytews8159
@tytews8159 7 лет назад
Great build. What tank are you using? After looking around I have found that all of the sportster/peanut tanks have too narrow of a tunnel to fit nicely on the frame like you have. Cheers
@MXrider101
@MXrider101 7 лет назад
Yeah the back bone of the rebels are pretty wide. Think we got the tank from Low Brow. Check their website!
@farizafaf
@farizafaf 5 лет назад
what type of bobber is this? low bobber? or what? plz lemme know
@apachi5383
@apachi5383 5 лет назад
Nice Sound ;)
@specialized29er86
@specialized29er86 5 лет назад
Streets of Fire : )
@youngfeezy7969
@youngfeezy7969 Год назад
Dude sick bike! Where u get the rear fender? I slammed and bobbed my 250
@Hardboiledcustoms
@Hardboiledcustoms Год назад
Thanks man! Cooper Smithing Co. is the fender brand. nice!
@TheJoesWorld
@TheJoesWorld 4 месяца назад
No kick-starter, not a bobber! 🫡
@RAY-vz9sn
@RAY-vz9sn 5 лет назад
Perfect.
@floletueur
@floletueur 7 лет назад
What are the size of front and rear tire please ?
@adamchapin9036
@adamchapin9036 5 лет назад
Love the forks
@LucasW.B
@LucasW.B 5 лет назад
Teach me master x) looks fucking sick!
@asphaltrequired3708
@asphaltrequired3708 7 лет назад
Very nice bike! I love that seat too! Where did you get the seat from? Also did you lower the bike at all? If so, how much? Thanks!
@dannygarcia511
@dannygarcia511 7 лет назад
hey man awesome build! I would like to know where I can get exhaust pipes like yours
@williamburnett1090
@williamburnett1090 5 лет назад
That bike looks fucking awesome. How many degrees is that rake? I love the low slung stretched look with the short springer front end and right hand shifter
@williamburnett1090
@williamburnett1090 5 лет назад
Absolutely perfect rake for that style. Love it thanks for the quick reply
@mietv2868
@mietv2868 5 лет назад
nice hand brake haha
@dellscatering975
@dellscatering975 5 лет назад
Awesome! Is that jockey shifter on the right side?
@olnelypolanco24
@olnelypolanco24 6 лет назад
i have been trying to buy the rear fender can you please send me the link for it please?
@aldosandrin1958
@aldosandrin1958 Год назад
One of the nicest bikes on the net. May I ask how did you change the frame? The neck looks much lower than the stock one..
@Hardboiledcustoms
@Hardboiledcustoms Год назад
Thank you! the neck was cut and the angle was increased to 38*. Stock i believe was around 30*.
@aldosandrin1958
@aldosandrin1958 Год назад
@@Hardboiledcustoms so it's just a rake raise, i tought you also lowered the backbone, thanks for the reply and sorry for my english, your bobber is awesome!!!!
@Hardboiledcustoms
@Hardboiledcustoms Год назад
​@@aldosandrin1958 Your English is fine! No we did not lower the top tube. The rear hardtail section was lowered the bike a few inches though and stretched it 3" I believe. That plus the increased angle of the neck gives it a much lower and longer appearance.
@jasonjacobs2095
@jasonjacobs2095 11 месяцев назад
did you buy the custom parts from TJ Butal Customs?
@djay6651
@djay6651 7 лет назад
You don't hardly see springer front ends on Rebels. What brand is on your scoot?
@backsabbath7945
@backsabbath7945 6 лет назад
what kind of tires are ?
@Choppersliveforever
@Choppersliveforever 4 года назад
love it, what size wheel and tire?
@izacjaramillo8471
@izacjaramillo8471 6 лет назад
What exhaust pipe is that sounds amazing
@wong9694
@wong9694 10 месяцев назад
👍
@MaxPower-ll4sm
@MaxPower-ll4sm 5 лет назад
Can you tell me the size of your tires... I like a lot
@djay6651
@djay6651 5 лет назад
What brand are those springer forks?
@andrewvitale2700
@andrewvitale2700 5 лет назад
What is the tire and rim size..thanks
@spanishflew
@spanishflew 5 лет назад
sweet- where did you get the frame and forks?
@robertdegroot3835
@robertdegroot3835 7 лет назад
Is the front wheel a rear from a donor rebel modified to fit the front? Looks mean as
@MXrider101
@MXrider101 7 лет назад
No, front and rear wheels are Harley 16" 40 spoke rims. Thank you!
@wesleehein28
@wesleehein28 6 лет назад
So did you cut and weld to rake the bike or was the rake modified by the forks ?
@wesleehein28
@wesleehein28 6 лет назад
How hard was the fork conversion? Did you have the springer stem machines to fit the factory neck bearings or did you replace the factory bearings with the tapered style?
@justheretoinspireyou5803
@justheretoinspireyou5803 Год назад
That bike dope !! Did you lower them forks ?
@HoagMurkula
@HoagMurkula 7 месяцев назад
They arent forks. He did a custom springer front end
@HoagMurkula
@HoagMurkula 7 месяцев назад
They arent forks. He did a custom springer front end
@loritayanam1232
@loritayanam1232 7 лет назад
nice
@stefan76ful
@stefan76ful 7 лет назад
Piękny,chcę go...
@MXrider101
@MXrider101 7 лет назад
Dziękuję Ci!
@grandsator1978
@grandsator1978 5 лет назад
Hi can you give a link of where you got your gas tank? Own a cmx 250 and would wanna have that same gas tank. Hope u can answer my question
@grandsator1978
@grandsator1978 5 лет назад
Was it the stock harley sportster? Too many over here hehe
@jhovannymojarro627
@jhovannymojarro627 5 лет назад
have you tried searching for a peanut fuel tank? that’s what my sportster has at the moment
@shelbydaugherty8352
@shelbydaugherty8352 5 лет назад
Shorter pipes
@thegoalieexperiencethegoal3298
What year is this bike?
@vladkeren6971
@vladkeren6971 7 лет назад
It's a hardtail from stock frame, or its a custom frame?
@vladkeren6971
@vladkeren6971 7 лет назад
Oh, thank you very much. Cool motorcycles, best custom of Hon-Rebel thet i ever can see.
@vladkeren6971
@vladkeren6971 7 лет назад
Am also want honda, but i have USSR motorcycles KMZ m-72 and i fuck my brain.Becouse its Ussr moto.)))))
@vladkeren6971
@vladkeren6971 7 лет назад
I want make a old school bobber.
@vladkeren6971
@vladkeren6971 7 лет назад
facebook.com/profile.php?id=100012652171937 All photo on the wall.Not so mush but thet all thet i have.
@tonimaroni81
@tonimaroni81 Год назад
so wundschön
@Daddy-1975
@Daddy-1975 5 лет назад
beau style mais serait meilleure avec un moteur harley shovelhead...
@waatao9856
@waatao9856 Год назад
Fuck man I want one but I won't ride it
@MarioBros-gx7tb
@MarioBros-gx7tb 5 лет назад
😎👍👍
@anthonyroberts2406
@anthonyroberts2406 4 года назад
Forsale?
@marvolo1245
@marvolo1245 6 лет назад
hermosa
@MarioBros-gx7tb
@MarioBros-gx7tb 5 лет назад
😎✌👍👍
@user-oy8xu3mw2m
@user-oy8xu3mw2m 5 лет назад
いっつも思うけどアメリカはヘルメット着用義務的なのはないのかな??
@ferw92
@ferw92 6 лет назад
Esta perra la choperona
@mrmidnight32
@mrmidnight32 5 лет назад
I love these bikes. But why does every dude that rides them act like a d bag like they the hardest dude on earth. When your personality so weak you need a bike to make you look bad 🤣
@TheAgoProduction
@TheAgoProduction 5 лет назад
At least this bike is build, than you have the d bags with really 0 personality and a new motorcycle bought because is for tendence.
@Hardboiledcustoms
@Hardboiledcustoms 5 лет назад
Thanks for the positivity. Coming up with preconceived notions and never once meeting me. Anyway glad you like the bike.
@aekracing3726
@aekracing3726 4 года назад
🇹🇭❤️🙏👍
@osgcustomrepairs3859
@osgcustomrepairs3859 6 лет назад
Nice job! Look at my project too and say what u think ;) ru-vid.com/show-UCVLaWiz-4oJK4R9x6rILiyg?view_as=subscriber
@lluwd
@lluwd 5 лет назад
lol
@Hardboiledcustoms
@Hardboiledcustoms 5 лет назад
BigDaddy 🤷🏼‍♂️
@groganbordonblue5735
@groganbordonblue5735 5 лет назад
Sit on the floor
@DoGxNinjaBear
@DoGxNinjaBear 5 лет назад
🤦‍♂️
@Hardboiledcustoms
@Hardboiledcustoms 5 лет назад
therevsdeathbat 🤷🏼‍♂️
@kikadasmaximas3759
@kikadasmaximas3759 5 лет назад
Pa que se gasta dinero la gente en cistomizar esas motos si son una puta mierda, un bicilindrico en Libia horizontal , menuda cagada
@Steakalas
@Steakalas 5 лет назад
Sepionnya jelek
@gassyirishman2859
@gassyirishman2859 4 года назад
Electric start just don't belong on a bobber...
@Joanchovyy
@Joanchovyy 5 лет назад
lmao that dude is gay af
@CaneFu
@CaneFu 5 лет назад
Uh...a 450 is nothing more than a scooter, and the Rebel is intended to be a beginner's bike or for tiny women. This poser is like a Cuban Cadillac on a Volkswagon chassis. Add another thousand CCs and you'll have a real motorcycle.
@warrensykes7382
@warrensykes7382 4 года назад
Crapanese.
@dylanc760
@dylanc760 4 года назад
0:32 loooooooool. cringe.
@fabianquetimporta
@fabianquetimporta 6 лет назад
Horrible, espantoso, muy mal gusto
@insanedb
@insanedb Год назад
Ok take my money
@jaimeramirez6407
@jaimeramirez6407 7 лет назад
What is that lever for?
Далее
Honda Rebel 250 Bobber Build Part 3 | Stance Check
11:36
Lifan 250 LF4 2003 model Bobber build
0:13
Просмотров 58 тыс.
ПРИКОЛЫ НАД БРАТОМ #shorts
00:23
Просмотров 2,4 млн
1986 Honda Rebel CMX450C
10:07
Просмотров 57 тыс.
"Toshiko" The Lightweight Honda Rebel 250 Bobber
22:15
I bought this Chinese Bobber to Modify. LETS CHOP!
11:31
1987 Honda rebel bobber
1:11
Просмотров 44 тыс.
SOLD! 1986 Honda Rebel 450 in Davis, CA
2:07
Просмотров 56 тыс.
Honda Rebel 250 Sound Test
1:26
Просмотров 240 тыс.
Suzuki 750 bobber
1:14
Просмотров 1,2 млн
Final Touches for the Honda Rebel Bobber | Build Pt6
20:43
Harley Evo Bobber first Kickstart
0:58
Просмотров 2,5 млн