On thos video,O have explained about the basic functionality of PID controller. hope you like the video, watch it completely & let me know your thoughts
Very Informative Videos you are posting Sir , Please keep up the Great Job and we are looking for Honeywell Safety Manager explanation if possible please , Much appreciated
Experion pks starting se samjhao Jisme ek dum new user h to wo kese open krega, kya kya assign krna padega aur normal close loop ka dialogue run krke batao please
Thank you so much. I work in an oil refinery. There is a Siemens stg800 electric power station. The dcs pcs7 system and the Honeywell refinery system ... 1- How do I transfer the signal between them? 2-And if the signal is transmitted and there are problems when operating through the Honeywell, what is the solution?
Great to hear. Usally such kind of communication happens through modbus. If distance is more then in that case optic fibres are laid. These checks are done during engineering phase only. I am not aware about the distance & architecture in your plant, so i can not comment more on it. Generally you should only monitor the third party systems from DCS & if you want a control then in that scenario it should be hardwired. I believe your doubts are clear a bit now.
There is one more option in positioner also (For direct & reverse action setup), you can use that if you don't want to use the PID Controller option. It is best to change the action in PID controller itself
