Hose Repair - Bissell Spot Clean ProHeatPet

Подписаться 47

Просмотров 33 тыс.

50% 1

The Bissell Spot Clean Pro is a portable extractor tool. It is perfect for cleaning up pet messes or any general upholstery cleaning application. But the hose tends to get worn down and breaks just behind the extractor nozzle. This is a common issue if you read through reviews for this extractor.
In this video I show you how to repair the hose on the Bissell Spot Clean ProHeatPet.
Tools I used for this repair:
Wire cutters
Needle-nose pliers (to remove old hose from nozzle and bend wire end)
Gel Super Glue
WrapIt hose repair tape

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 29

@kevindeustachio4948 2 месяца назад

Tips: 1. I took off the brush head and the cleaning solution supply hose and it was *much* easier to clean the threads. 2. The hose threads in the opposite of normal screws. It’s counterclockwise to go in. We are not discussing how long it took me to realize that.

@DJP6069 5 месяцев назад

How do u fix it at the other end?

@yiranjack 10 месяцев назад

That hose material is the brittlest. It seems the company made that way on purpose.

@suejonmeyers8362 Год назад

Excellent thank you! I like the extra step of reinforcing it. Helpful

@allcaps2888 Год назад

Thanks, mine broke in less than a dozen uses.

@EVO1087R 17 дней назад

The tape is a good idea if you want to prolong the hose from cracking and don’t mind the look. Id put the minimum amount of glue in case the hose cracks again. Mine was glued in and I had to dig in there to get the old one out. It was terrible. When i trimmed it and put it back I didn’t use much glue and its been fine I just check the head is threaded on the hose the whole way every time before using it. If it wont spin thats good the glue is still doing its job.

@veronicavalenciaguerrero1723 19 дней назад

Mi aspiradora ya no saca agua que sera??? Y si aspira se le escucha un sonido raro

@EVO1087R Месяц назад

The “wire” is the spray hose. You dont want to bend it too much

@Loulski 17 дней назад

Hi, could this wire/spray hose be cut instead of bent? I have to repair my hosre and want to insure it’ll work correctly😊

@EVO1087R 17 дней назад

@@Loulski if you trim / cut the outer hose you can trim the inner hose the same amount but less is better which should avoid any bending of the inner hose

@bkj242 Год назад

Great suggestion and repair process!

@jimmysingh1465 8 месяцев назад

Not sure why Quality videos get no where.. This is far the best! Saved me $50!

@landongall2080 16 дней назад

Awesome. Thank you

@ataweiam7 Год назад

I emailed the company with receipt and they're sending a new one

@amywilkins 8 месяцев назад

how long did you have it?

@rebeccakemm4335 8 месяцев назад

You are awesome! Thank you for this video!! My hose broke, tried to get a replacement and they don't have them for model 28912! Seen your video and fixed the hose. 😊