Nice. That’s smart with the petrol, I have to use 2 different pumps every time I fill up 😂 I’ve got the same set up from Spray away. It’s a game changer. So good.
Very nice setup mate👍 and thank you for sharing your setup. The LDV here in Australia they have a very high cab what model LDV you have thank you Nathan
That one is a V80, pretty sure they dont make them anymore we got the last 2 from what I was told. I think to buy them new now you have to buy the Deliver 9 model.
Very nice setup. Few questions. First is the battery placement, could the battery be mounted under the tray somewhere? Second is regarding the chemical injector remote bypass. What do you do when you remotely switch to water but the ball valve on the pump unloader bypass is set to chemical.? Will the Chem tank not fill up with water? And I assume this system only works with batch mixing? Is there any way you could run the stainless steel pump with a proportioner setup? The problem I see is the pump bypass. And regarding the floodlights, will are the floodlights connected to the chemical remote bypass as an indicator?
Yep we have mounted the battery under the deck on a few other of these trucks, The main reason it is where it is because this truck has a full LED flood light setup for night work that hooks on to this battery and the ease of set up and pack away was the only reason it is there. In regards to the remote switch we dont do anything as the unloader is before the valve and chem injector so it only bypasses water back to the main buffer tank. Regards Troy
usually there is a pipe that runs up the side of the tank and goes into the top of the tank, this is the water fill pipe from the roof, half way up the pipe on the side of the tank there is usually a T joint with a cap on it, you just undo the cap and leave this off while you clean and for a good 3 to 5 rain events after cleaning this will dump all contaminated water on the ground as the caps off, if we turn up and the plumber who installed the tank is brain dead and did not install the T joint we will install one while were there for this reason @@benjaminbutler3487