No video :(

How $3,300 Rims Are Made

Подписаться 217 тыс.

Просмотров 200 тыс.

50% 1

Hand-crafted for classic sports cars, hot rods, and lowriders, wire wheels use up to 84 handset metal spokes arranged in geometric patterns to support the weight of a vehicle. Turrino Wire Wheels in England focuses on rims for European luxury classics, from Ferraris to Aston Martins. Each made-to-order wheel can take up to 12 hours to build, and a set can cost over $3,300. Here's how they're built.
MORE CARS INSIDER VIDEOS:
How Engines Are Made
• How Engines Are Made
3 High-Threat Driving Techniques Used By Military Personnel
• 3 High-Threat Driving ...
How The Mustang Evolved Over 56 Years, From Sports Car To EV
• How The Mustang Evolve...
------------------------------------------------
#TireRims #Cars #CarsInsider
Cars Insider highlights the innovators and DIY masters who are changing the automotive world.
Subscribe to our channel and visit us at: read.bi/7XqUHI
Check out Cars Insider on Snapchat: insder.co/cars
Follow Cars Insider on Facebook: insder.co/2OaJTkv
Follow BI on Facebook: read.bi/2xOcEcj
Follow BI on Twitter: read.bi/2xCnzGF
Follow BI on Instagram: read.bi/2Q2D29T
How $3,300 Rims Are Made

Опубликовано:

22 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 200

@MikeLaRock88 2 года назад

Not only the most expensive, they're the hardest to clean

@estbeta 2 года назад

You mean impossible? Right? My bike wheels always seem to hide some dirt for when im done cleaning them

@MikeLaRock88 2 года назад

@@estbeta Yeah its near impossible. Wheel cleaner/degreaser and a toothbrush is about as good as I could get them. Takes forever too

@lazcra2548 2 года назад

Not the most expensive wheels. Intro or billet wheels cost around 5k minimum

@MikeLaRock88 2 года назад

@@lazcra2548 yeah I'm sure there's more expensive wheels. Didn't mean to get literal

@DK-lz7kg 2 года назад

The first thing you gotta do is get them ceramic coated, it will help. But then either way, they are a horrible designed wheel in terms of maintenance. They are less appealing once an owner realizes they will always look dirty and take too long to clean

@chloehennessey6813 2 года назад

This company redid the wheels for my 1955 Lancia Aurelia B24. For the amount of money spent on them- you’d think they’d debur the hubs holes a little better.

@ziadt4264 2 года назад

You a girl and u hava a 1955 lacia aurelia? Damn, where can I get one like u 😂

@malikemad4 2 года назад

Yeah I noticed that , looks botched

@hydorah 2 года назад

I don't see any car content on your channel. A bit odd

@kapenike 2 года назад

you can pay an employee to care enough for good work, but only the employees that really care do perfect work. Unfortunately they're too rare to build an entire business around so subpar will always exist

@swapnilmankame 2 года назад

@@hydorah it's not compulsory to make car content if you own a classic car. not odd, its just being normal. majority of classic car owners live a private life.

@davidhoffman1278 3 года назад

A lot of potential for process improvement using robotics and 5 axis machining. That might reduce the retail price significantly. High quality for less retail cost. Or they could keep the retail price the same and have a larger profit sharing system with the workers.

@Xerber85 3 года назад

I was thinking the same thing after seeing this. Far more of these processes can be automated, especially when it comes to the machining.

@hanoimenace 3 года назад

Rotiform

@jimk8520 2 года назад

I would curiously wonder if the market for these is large enough to support the costs necessary to automate it.

@skycorrigan6511 2 года назад

I assume some of the lure of these wheels is that they're hand made.

@iamvaske 2 года назад

You could say the same for Ferraris, but part of the appeal is that they’re hand crafted.

@KirillAfonin 3 года назад

I wonder if these wheels require regular truing like bike wheels?

@Techie1224 3 года назад

lol

@Tycy2014 3 года назад

Probably

@Partnerthedog 2 года назад

Well if you ride on smooth roads and don't hit a pothole your good.. if you live on the east coast then probably need them done once a year I can only speculate.

@RiderBlitz1.0 2 года назад

As a diy wheel builder myself, i agree fitting this spokes and perfectly aligning this wheel are Pain

@JPspinFPV 2 года назад

As a bicycle wheel builder, I'm surprised they aren't better. 1mm on true isn't great, but probably acceptable with that tire volume. More important to me is stress relieving the wheel to ensure even spoke tenson. This can be done maintaining true and round.

@whitelightning5937 2 года назад

Is it me or the “some aren’t capable of leaning” bogus

@enemyspotted2467 2 года назад

Maybe not hands on work. I know plenty of people who are wizards at playing instruments, math, accounting etc. but are absolutely inept when it comes to any sort of manual labor.

@CasperP1105 3 года назад

I wonder how Texan wire wheels are made

@BabyJesus66 2 года назад

Ask China

@CasperP1105 2 года назад

@@BabyJesus66 I guess the made in California I googled it

@MrNastytrucker44 2 года назад

A guy with a bucket of churches chicken and a black & mild put giant set of spokes under a cadillac they're called "swangas" in texas.

@andylopez8676 2 года назад

$3,300 for wheels Stance boy with blitz 03’s: 3k that’s it?

@J.mz00 2 года назад

do you really think 3k is a lot?

@andylopez8676 2 года назад

@@J.mz00 read it one more time I don’t think you understand the joke

@saigoneze4465 2 года назад

i'm loving this channel especially behind the scenes videos like these in the auto industry

@reviinge 3 года назад

Ah so this is how swangas are made 🤟🏾

@cotownjustin 2 года назад

Hnnn these ain’t even poking out like swangs

@roughroadrunner88 3 года назад

2 hour polish on each wheel. Gonna be expensive

@lorenzocarrillo 3 года назад

Awww Man, I was looking forward to the silicone seal of the spokes!

@Eren-da-Jaeger 2 года назад

Do they use tubeless tires in these ? I thought air will escape through spoke holes.

@sampuhhupmas5666 2 года назад

@@Eren-da-Jaeger I assume a sealant is put into the holes to prevent air from escaping

@oyen9476 2 года назад

@@Eren-da-Jaeger there's a silicone or rubber ring inside the rims to cover the spoke nut. You can use tubeless.also there is anti leakeage liquid i don't know what's they called to make sure the air doesn't escape.

@dntlss 2 года назад

Awesome video, i cannot stand wire wheels but i do enjoy watching how they are made.

@Integrity.is.everything 3 года назад

Do 84s next for my Texas podnas

@c_wonder 2 года назад

I can see the imperfections but I guess that’s what you’re buying into. a unique crafted wheel.

@GoogleAccount-tt5yx 2 года назад

why do you need an unique crafted wheel??? that has imperfections?? for 3300dollars?!?!??!

@charles5238 2 года назад

$3300 a set is the same price as some carbon fiber mountain bike wheels, and don't even get me started on 10,000 dollar road bike wheels.

@ryangilbert1951 2 года назад

I wanted to comment that upper end mountain bike wheels cost more than this and are hand built very similarly lol

@cabbyhubby 3 года назад

Wheels ... they are wheels! the rim is only one part of the Wheel.

@christianscustoms6429 2 года назад

Always someone 🙄

@toology55 2 года назад

I had these on my cutlass supreme.

@TwinShards 2 года назад

I work on bicycle and i do build rim+spoke+hub together myself. And let me tell you it's a very hard job to build a wheel if you try for the first time. I don't imagine how much more difficult it must be to do it on a car wheel with spokes that do not bend at all by hand. 4:04 there's 2 thing to check for, true-ing the wheel and the Up-&-Down.

@household_cracker 2 года назад

I came here to watch an interestin video, ended up spending 5 minutes on an ad, very cool.

@shortarms4114 2 года назад

That’s one hell, of a rim job!!!!!!

@victordeltoro7400 2 года назад

The whole time I was watching this, I was thinking "Houston candy painted caddy's"

@shadowthehedgehog7350 3 года назад

Aston Martin db5 rims

@PowerPlayersMagazine 2 года назад

Know I know why my Houston people called them Trues with Vogue tires. Because you gotta true up the spoke wheels.

@rakeshswami11 2 года назад

Me : "I'm getting late to work" RU-vid : How $3000 rims are made? Me : must watch this.

@39FORTYWATER 2 года назад

That's was good short video. Probably couldn't been longer. Secrets. If not, it still was good. 😳💯

@envitech02 2 года назад

That's a very nice spoked wheel but sure is a lot of work to manufacture and to maintain.

@the.flat.six. 2 года назад

My favorite rims for retro motorsports.

@nox_chan 2 года назад

All I saw was Craftsmen not craftsperson

@UniversalPangay Год назад

Where did you get the hub? I wonder if you bought it or it is also customized.

@DeepSpaceNetwork 3 года назад

"most people are unable to learn well enough at all" lmao 99% of the work is done by machine.... and it's a wheel....An arrogant statement

@KirillAfonin 3 года назад

The most important part - spokes installation - is made by humans and is important enough to screw everything up.

@speeddemon6709 3 года назад

When one spoke is wrongly done.. The balance of the wheel messes up

@sir_ma-at_mons 3 года назад

Wow doomham100... Ironically What you Just Said Is the most Hubristic and Arrogant Statement. Workers who are skilled and Patient enough to be able to to create these wheels are Rare Craftsmen among Today’s Unskilled Starbucks and McDonald’s employee’s. You Say 99% of the work is Done by Machine yet neglect the countless hours of Fine tuning and Precision measuring that required and not to mention the skill needed to operate the Machines that do the work. From your Statement I doubt you have ever really worked a Job that required you to work skillfully with your hands for long periods of time. Before you make Vulgar assumptions about this Antiquated Art of wheel making I suggest you try it for yourself.

@DeepSpaceNetwork 3 года назад

@@sir_ma-at_mons I work in the industry. Thank you

@ComicusFreemanius 3 года назад

@@DeepSpaceNetwork someone had to do do it by hand a million times before we were even born then others had to come up with binary then assembly programming languages to even be able to automate the process. And here's you gripping about how you work at Pep Boys and you can do better

@nlq7844 2 года назад

Totally like building a bike wheel. Love it!

@sergiosergio9600 3 года назад

Wonder Craftsman!!! Masters

@drakedavila3260 2 года назад

I'm into lowriders alot & I think I have found a video about the rims of how they're made

@iamthefuss934 2 года назад

These ain’t Dayton’s bud. More like swangs

@essvd2524 2 года назад

wheel face, barrel, and rims are all different things that make up a wheel and if you’re think differently you’re wrong

@BabyJesus66 2 года назад

You didn't mention sealing the spokes.

@saltysteel3996 2 года назад

Spoke wire wheels have always looked bad. Ridiculous kids wheels.

@mr.screenshot9452 2 года назад

So awesome 💙💙

@The_blueyed_beast 2 года назад

Compared to my custom 3 piece for my hellcat redeye you can get a whole set for the price I’m playing for one

@daviddavid5880 2 года назад

Well you see, son, when a money launderer and a hedge fund manager love each other very much....

@monalisa3549 2 года назад

"But shaping the wheels doesn't end there." Me : It doesn't?! Woah...

@solarflare1008 2 года назад

Over 3,000 I wonder how much they charge the labor hours.

@mistermood4164 2 года назад

most of this could be automated completely

@christianscustoms6429 2 года назад

Almost any task can be automated. It’s not always economical to do so though and often times you can charge more for something that’s handmade

@Hiiii1463 Месяц назад

Actually it’s not 3,300 dollars it’s 3,320 dollars 🤓☝️

@RickH07 2 года назад

We call these 84 in H-town

@jayrmartin5766 2 года назад

Dead head lol! Don't catch me

@greaseaddiktz3217 2 года назад

It cost 3300 because they ar overpriced 😂😂😂

@exclusive_plays 2 года назад

Wire wheels nah we callem swangas in Houston

@cjsgarage3789 2 года назад

Bmx wheels are almost the same process.. especially the building/trueing. I’d love to build a car wheel some day

@Forleaftaback Год назад

...wait. is it a, "wheel" or a, "rim?" 😅🤣

@jpisty 2 месяца назад

I love how the narrator was super PC when he said 'craftsperson'. Knowing full well not a single woman ever works on this wheel

@user-th6gv9jh6z 7 дней назад

Gotta be a fool to even think about paying for that crap

@ramama987 2 года назад

Strange title... it's just what any new set costs... why not name it spoke wheels or something?

@pepepepepe33 3 года назад

Didn't know I can't day craftsman anymore

@noahnguyen6924 2 года назад

awesome.... but if anyone follow Parkistan truck channel, you will know, they can made those wheels with home depot tools! :D

@penttijakonen3817 2 года назад

That's the price of a very basic 3-piece wheels or forged monoblock wheels...

@davidgutierrez8297 2 года назад

And that's why alloys are more popular

@BOMBON187 2 года назад

For that money I thought at least the spokes would have been welded on.

@enemyspotted2467 2 года назад

Adjusting the spokes is crucial to aligning the wheel. You also cant weld steel to aluminum

@joeschlotthauer840 2 года назад

For that kind of money, the spoke holes and dimples should be CNC ...

@michaelrobison703 Год назад

Real rh Platinum 13/7. 33 spoke cross lace

@pissgoat 2 года назад

guess they haven’t heard of proper custom made 3 piece wheels

@ACommenterOnYouTube 2 года назад

$3300 ??? I dont see any Gold or Vibranium or Onuptanium or Uru ???

@mxrclxst 2 года назад

cool

@camaro25 2 года назад

I really hope they got rid of the ugly as dimples. That looked like garbage when they were installing the spokes.

@tedmich 2 года назад

1) find an idiot, with money.

@WaffleCopterCO 2 года назад

Idk why.. but the guys voice made this unwatchable for me...

@enemyspotted2467 2 года назад

"craftspeople" did it for me.

@tj9585 2 года назад

What about 100s 75 isn't the most they use

@michaelc6631 2 года назад

Craftsmen?

@cosnovae 2 года назад

Bicycle wheels:

@bellytripper-nh8ox 2 года назад

**RIMPS**, not **RIMS**

@leosdreamon681 2 года назад

I’ll pass on that wheel lol

@Jones_Media 2 года назад

84's

@arnulfoesparza601 3 года назад

Yes my Dayton's coast $3.900 . For five rims . And they are made to order.

@dvader3000 2 года назад

So?

@redsledpass 2 года назад

“Wheels” not rims

@chadmartfeld Год назад

The hub which is made in a similar manner. Thumbs down on that!

@zane6723 2 года назад

so the only expensive thing is hand made

@LSnium 2 года назад

I wouldnt pay 10 dollars for those rims.

@caioaugusto3138 2 года назад

3000$ for a bycicle wheel lol

@mariobejares8273 2 года назад

Blitz 003: Amateurs

@hulem98 2 года назад

I would take aluminum wheels any day of the week

@iamthefuss934 2 года назад

Texan wire wheels cost more

@aaronageesh5713 2 года назад

my cycle rims cost less that this

@CarsOfPennsylvania 2 года назад

the barrel looks like shit

@tangtyler 2 года назад

I didn’t see any rims, only wheels

@evan_rains 2 года назад

This is the only case where they ARE rims lol, only spoked wheels have rims. Rims are the outer ring of spoked wheels

@Elotes606 2 года назад

"wheel" to make "wheel"

@texassabre7214 2 года назад

LOL. So many hand op just embarrassing. 3K? No way.

@TheFlyingPLiner 3 года назад

This makes 3 piece wheels seem like a bargain

@jamfoxs 2 года назад

Wheels 🤦‍♂️

@tettazwo9865 3 года назад

Horrible "music"!

@davidrangeljr_ 2 года назад

Wheels

@APAstronaut333 3 года назад

Yo how much he said it is for a rim

@brien1254 3 года назад

he said up to 3300 for a set.

@rts159 2 года назад

ugliest rims to exist. overpriced

@wayned3137 2 года назад

Expensive shii but don’t work well

@redraptor1334 3 года назад

John 3:16

@christophresmerowski1824 2 года назад

3000.00 Dollar rims? You start with a solid clump of 18 carat Gold.

@williamsebastian88 2 года назад

Lol “rims” really stupid.

@subaruwrx5701 2 года назад

I would not want this ugly ass rim for free

@fordTH7335 3 года назад

So where are the 83s and 84s? Gotta highlight the spoke wheels from the Southern US, especially Texas. Or Cali and their Daytons? Need a gangster/hood version of this vid next lol

@stuartmarshall2073 2 года назад

i am retired from dayton wire wheel and we make a lot of wheels but never spent 2 hours on a rim -. the hot wheels now are the all gold 24's they cant make them fast enough. they are not cheap ($15'000 for 4 wheels) so look them up (yes there are still open)