How a condenser tumble dryer works air flow through heater and heat exchange condensor plate

Подписаться 141 тыс.

Просмотров 32 тыс.

50% 1

CONDENSER DRYERS - DRYING CIRCUIT
There are two air groups inside the condenser tumble dryer:
• One hot air which is recycled on itself through the tumble dryer drum,
• One cold one, for the circulation of ambient air through the condenser plate.
The first air group, which is hot and closed in on itself, circulates inside the tumble dryer while the other cools the condensing plate, when water is condensed it collects in a bowl that is then transferred to a collection tray that you empty via the pump.
Here is a full list of all common Tumble dryer faults and repairs
▶ www.youtube.co...
Visit our shop for hundreds of tumble dryer parts b.link/v3n5wpwk
#CONDENSER_DRYERS #DRYING_CIRCUIT #AIR_FLOW
Please remember to subscribe to our channel and click on the bell notification to get reminders
www.youtube.co...
Remember to Shop with www.how-to-rep... and it would help us by posting the video or the website on your
timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.c...
Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels
social media as this really helps my site and keeps us going.
RU-vid. / apart4u
Facebook. / how.to.repair.appliances

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 43

@bensappliancesandjunk 9 месяцев назад

Getting ready to review the new LG WM6998HA and having to do my homework on condensors vs. heat pumps as condensors are VERY uncommon here in the states. Thanks so very much for all of this!

@SMAr2wo 8 месяцев назад

Best explanation. Thank you Sir!

@zikermu 9 месяцев назад

Thanks a lot for these wonderful explanations . Happy New Year 🙂

@kevinbeck6785 8 месяцев назад

Thank You, never knew how the tumbler worked, was having trouble with mine not collecting water

@i7Satori 4 месяца назад

Thank you for this. Now I understand fully!

@How-to-repair 4 месяца назад

really glad this helped you please remember to share our site on your social media as that's what keeps us going

@fidsta30 11 месяцев назад

Excellent explanation thank you

@ivosilva8747 2 месяца назад

excellent explanation. Thank you!

@How-to-repair 2 месяца назад

You are welcome! It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks, Paul 👍

@josemanuel5749 2 месяца назад

I got a Magic Chef Washer and Dryer Combo, this helped a lot thanks!

@How-to-repair 2 месяца назад

Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇

@michellehavre6821 Год назад

can you tell me if the condenser is more suitable for a hot tropical country with high humidity or a country with long winter and dry air.

@nowthenad3286 Год назад

I have heard that condenser dryers emit moist air into the room. According to your diagram, it looks like the humid air is confined to a closed system. Can you comment on the amount of moisture that is given out by a condenser dryer? Thanks

@How-to-repair Год назад

there should not be a lot of humidity going into the room that humidity should actually be absorbed on the condenser plate. glad we could help you Nowthen AD this is for you ru-vid.come432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

@thehandyman1985 Год назад

Based on my experience condensers emit moist air, I have my dryer in the toilet and when I use it I have to keep the door open. I had another experience as well when there was a leakage in the condenser circuit and it was not drying, it was the time a lot of moisture was released in the air. BTW my suggestion id to keep the door open if it's confined in a small room. -TheHandymanItaly

@shellyrose6732 Год назад

Great video, thank you. I have a Zanussi ZDC8202p condenser dryer and the water keeps leaking from underneath and not collecting in the water container at the top. It is level and I’ve cleaned the condenser and the primary filter. Any suggestions on what I can check next? Thanks 😊

@How-to-repair Год назад

The water Kalex on the condenser plate then it runs down the plastic to the pump system or two a collection bowl. If any of these fittings are blocked. You may have a problem and sometimes the plastic can get cracked on the base of the machines so do inspect this as well. glad we could help you @shellyrose6732 this is for you ru-vid.come432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

@loftalofta8423 2 года назад

Some dryers also channel condensed water to house drain system making it way less hassle to use..

@AfzalFelander 3 месяца назад

Hi there I got a AEG 57800 tumble dryer it's not drying my clothes and after a while it just went off no power on the tumble dryer plz help

@How-to-repair 2 месяца назад

Hi, I will need the full model number of the identification plate and the details of your problem. Please use our contact us page and make sure you fill out the request for what your problem is. A video shoot of the problem would be perfect as well. We will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍

@HippyRoss. Год назад

Is it possible just to remove the condenser and vent it? Would it still dry clothes?

@How-to-repair Год назад

You would have to do a lot of modifications and I'm not too sure on the airflow volume if it would work efficiently, but the basic idea is possible @valetworx please remember to subscribe to our channel as that really helps us ru-vid.come432SAb2g08 Thanks, Paul 👍

@biharitamas5738 Год назад

Thanks for the upload. I’ve got a condenser dryer and for some reason the condensed water won’t show in the reservoir located at the back of the device. I’ve tested the pump - it’s working, however there’s no water to pump, the reservoir is almost empty as well as the upper container. When I remove the condenser unit it’s always loaded with water so I assume the condensed water can’t get to the back reservoir in order to be pumped up to the upper container. How the condensed water should get to the back reservoir?

@How-to-repair Год назад

Sorry for the late reply I was away on a few days holiday. I will need the full make and model number of your machine but normally this is because the water is not draining from the heat exchange unit to the reservoir. There are usually some small tubes and these can clog up with fluff.. glad we could help you Bihari Tamás this is for you ru-vid.come432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

@biharitamas5738 Год назад

@@How-to-repair hi, thanks for coming back to me. I managed to figure out what the problem was. The condensed water gets drained into a reservoir at the back of the machine and from there there is a hole leading towards the main reservoir loacted at the back panel. That’s the reservoir with the pump. So the hole at the first reservior was conpletly blocked with some greasy stuff hence the water couldn’t drain towards the main reservoir. I cleaned the hole and tested by pouring a glass of water in the first reservoir to see if the water disappears. It worked like a charm so now the whole system is working fine😊

@uhjk91 9 месяцев назад

Do heat pump dryers release moist air into the room?

@How-to-repair 9 месяцев назад

No the moisture is connected on the evaporator and then pumped to your container

@uhjk91 9 месяцев назад

@@How-to-repair Thanks for the reply. Just to clarify, did you mean "collected in" instead of "connected on"? Thanks

@lesleybaldock1744 Год назад

Does the Blomberg condenser dryer work with side plates as well as end plates?

@How-to-repair Год назад

I would need to know them all number to be able to work that out Thank you for leaving a comment, I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. ru-vid.comUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm and this is for you ru-vid.come432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

@qkayani Год назад

I have a question. I have a condenser in a small utility room. The walls are external so the humidity is weeping onto the walls. I have a vent in the room, is there a way I can make the room less damp? Shall I connect the vent in the wall to the air intake (cold air) or let the warm air escape out. I could install an extractor fan but it may effect the efficiency of the dryer, because the warm air is being extracted.

@How-to-repair Год назад

I would actually get a small dehumidifier @qkayani please remember to subscribe to our channel as that really helps us ru-vid.come432SAb2g08 Thanks, Paul 👍

@lizquinn1908 7 месяцев назад

Stupid question but I'll ask anyway...why is there a need from the small reservoir "bit" at the bottom, the float switch then the pump to get the water up top? Why don't all condensr dryers have the collection tank at the bottom? All I can see is more stuff to go wrong, but there's obviously a reason for it :)

@How-to-repair 7 месяцев назад

Very good point the small reservoir holds about quarter of a litre when this is full it then has enough fluid to fill the pipe to transfer the water to the top, if it was trying to pump with less water, it would only be filling the pipe and then it would flow back down when the pump is turned off. Hope that answers your question As an ageing appliance engineer, my expertise lies more in the domain of domestic devices than in IT, resulting in a limited understanding of RU-vid video optimisation. Consequently, my videos might not reach their full potential due to these IT constraints. Nevertheless, they offer invaluable aid to those who encounter them. Your support in sharing our channel on social media would be immensely valued. By disseminating our content, you enhance our visibility and contribute towards addressing the pressing matter of appliance wastage. In turn, you play a role in averting numerous machines from facing an untimely end in the heavenly scrapheap of appliances. Thanks 👍

@fabrianofabriano1746 Год назад

Hello can I ask a question

@ReallyNo.01 4 месяца назад

Thank you, 2 hours though…

@How-to-repair 4 месяца назад

Even though it took you two hours, you saved yourself in excess of £300 on buying a new machine be proud of not sending another machine to the landfill.

@CCFC_86 Год назад

My brand new tumble dryer is leaking water from its first cycle out the back

@How-to-repair Год назад

A couple of things that might be causing the problem. Make sure the machine is 100% level. Secondly, inspect the plastic underside sometimes they can get damaged in transit. If none of these are a problem, then I suggest you call the manufacturer glad we could help you Jamie this is for you ru-vid.come432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

@LexCameron 11 месяцев назад

The comment about inefficiency at lower (eg garage) temps doesn't make sense to me. I would think the colder the condenser plate the better and quicker the condensation? Why not, if that's not the case? Of course, you wouldn't want to be running it anywhere near freezing, cos then you'd be dealing with ice formation.

@zz72212 7 месяцев назад

I guess is because the air will be cooled down too much and it take extra time and effort for the heater to reheat them to the desired temperature, I can’t think of any other explanation

@bigsassyster Год назад

Why do they always put the collection water tank at the top of the dryer? seems like it is a bad design because it will need a stronger pump than if the tank was at the bottom of the dryer.

@mikyleswindells4936 11 месяцев назад

Mostly for usability - imagine a disabled/elderly person trying to bend down, lift out a compartment full of water (2-5kg), then stand-up, take it to a sink, then refit it and do it all again the next time.